Other actuators and positioning accessories

When aligning with the Easy-Laser® XT190 BTA you reduce the wear on sheaves/pulleys, belts, bearings and seals, and you also get lower noise and vibration levels. The accuracy of the digital readout means that you can align within prescribed ...

Easy-Laser® D92 BTA is the perfect tool for sheave and pulley alignment. Mounted in a few seconds, the laser line projected onto the targets allows you to quickly ascertain and correct the misalignment. It couldn’t be easier! The D92 ...

Linear Actuators DCG Controls Thomson now offers a small, lightweight line of 24 VDC units in its DCG family of controls. The DCG controls feature built-in Electronic Limit Switches (ELS) to stop actuator movement automatically at a ...

Linear Actuators AC-247 ELS Controls Compact, robust, and lightweight, the AC-247 ELS control can provide outputs of either 12 or 24 VDC. These controls feature built-in Electronic Limit Switches (ELS) to stop actuator movement automatically ...

Linear Actuator AC-063 Controls Thomson offers the AC-063 control for use with its Electrak PPA, Electrak 10, and DMD actuators. Rugged and robust in design while operating under the hardest of conditions with a tough plastic enclosure. ...

Microprocessor-controlled electronic unit with integrated frequency converter for continuous control of electrical actuators. During continuous positioning the electronic unit varies the motor torque steplessly until the actuator force ...

Microprocessor-controlled electronic unit with integrated frequency converter for continuous control of electrical actuators. Also available as explosion-proof version. During continuous positioning the electronic unit varies the motor ...

Microprocessor-controlled electronic unit with integrated frequency converter for continuous control of electrical actuators. Also available as explosion-proof version. Overview During continuous positioning the electronic unit varies ...

• Compact central system • Overload safety switch • Medically approved, in accordance with IEC 60601-1 • Easy plug-and-play system that reduces time-to-market Features • 3 motor output (DIN8) • General current ...

• Rechargeable battery that allows operation during power outages • Overload protection • Medically approved, in accordance with IEC 60601-1 • Easy plug-and-play system that reduces time-to-market Features • 3 ...

•Centralised system that has stored positions and synchronised or parallel movement •Overload protection •Approved for medical use, complies with IEC 60601-1 •Easy plug and play system shortening time to market •3 or 6 motor outputs ...

Linear Motion System Gantry Robot Multi-axis XYZ Stage Ball Screw Module, Belt Driven Linear Guide, Positioning Stage, Motion Controller for Cartesian Robot. CE, FCC, RoHS, ISO9001 Certification. Wide Variety of Ready-to-Ship Products Quantity ...

This item is used on photographic and video technology. Clear Map R&D manufacfure special camera like: Ultra high resolution, super big frame, ultra high frame rate, ultra low illumination. G1610 ball screw cold rolled imporled ...

Series: FSK40 Stroke Range: 50mm~1000mm Position Accuracy: 0.03mm Max Speed: 255mm/s Max Load: 25kg Ball Screw: G1204/G1605/G1610 Ball Screw Module, Belt Driven Linear Guide, Positioning Stage, Motion Controller for Cartesian ...

Stroke: 1, 2.5, 3.9, 5 mm

1. Simple structure and small size; 2. The mover has light weight, high speed, high acceleration and high response; 3. High frequency, good high frequency response; 4. Zero hysteresis, zero slot effect; 5. Cooperate with appropriate mechanism ...

Stroke: 25.2, 31.2, 38 mm

1. Simple structure and small size; 2. The mover has light weight, high speed, high acceleration and high response; 3. High frequency, good high frequency response; 4. Zero hysteresis, zero slot effect; 5. Cooperate with appropriate mechanism ...

Stroke: 11.4, 18.5, 25.2, 49.8 mm

1. Simple structure and small size; 2. The mover has light weight, high speed, high acceleration and high response; 3. High frequency, good high frequency response; 4. Zero hysteresis, zero slot effect; 5. Cooperate with appropriate mechanism ...

Drived by pneumatic cylinder (ISO or rodless) Guided by rolling guides Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Options : Intermediate position(s) on 357 with through-travel More ...

M8.202 Energy Supply for Rotating and Lifting Modules for electric moduhub rotating and lifting modules Energy Supply for Rotating and Lifting Modules The control module is used for power supply and control of a moduhub rotating ...

M8.200 Control Modules M8.200 Control Modules for modulog modules - control module for 1 modulog module - control modules for 2, 3 or 4 modulog modules with synchronization control - for power supply and control with one operating ...

Motorized Actuators controller (GCD-6101) is equipped with a touch screen and two DIN jacks, which can manually control the motorized actuators in one or two dimensions through the touch screen. If this controller is equipped with GCD-040201M ...

Stroke: 50 mm

DINGS' offers wide range of sizes for VCM (Voice Coil Motor) & VCA (Voice Coil Actuator) series from smaller to bigger diameter of dimensional motors. Based on fixed diameter sizes, DINGS' can customize different stroke compare to other ...

Stroke: 4 mm

DINGS' offers wide range of sizes for VCM (Voice Coil Motor) & VCA (Voice Coil Actuator) series from smaller to bigger diameter of dimensional motors. Based on fixed diameter sizes, DINGS' can customize different stroke compare to other ...

Stroke: 3.8 mm

DINGS' offers wide range of sizes for VCM (Voice Coil Motor) & VCA (Voice Coil Actuator) series from smaller to bigger diameter of dimensional motors. Based on fixed diameter sizes, DINGS' can customize different stroke compare to other ...

Heavy duty linear units D-Line This whole new range of linear units is based on BLOCAN® heavy-duty profiles (D-profiles). D-Line puts into practice all the advantages of the modern developments in aluminium-alloy technology. This ...

• Main power: 2 12V/4.5Ah lead-acid batteries • Actuator interface：Max 3 channels, 6-pin ET bending plug • Handset interface：1 channel, 10-pin crystal bending plug • Standby power：≤0.1W(When the emergency stop switch is not pressed) • ...

· Outputs for actuator:1-4 · IP grade: Max. IPX6 · Power supply:SMPS • Power: input_100-240VAC, 50/60 Hz; The output power is 72W in the rated state, and the output power is 180W in the working mode • Power point light: Yes • Actuator ...

· Outputs for actuator:1-4 · IP grade: Max. IPX6 · Built-in dry battery • Power supply: Input 24~36VDC (match with power adapter) • Power indicator: Yes • Actuator plug: Max. 4 channels, 6 pin Molex elbow plug • Handset plug: ...

Green positioning lasers are designed to generate very bright line lengths: 30 meters. They are extremely visible and commonly used for positioning applications with a strong natural light on the workstation. They are developed on the ...

The PA-CB1-4 is a four-channel control box that is a plug-and-play solution to individually control up to 4 actuators on a single remote. Featuring an AC input voltage, an additional power supply is not needed to control your 12/24 VDC ...

The PA-31 is our most popular control box for controlling linear actuator(s). Using the RF remote provided, users have the ability to extend, stop, and retract their actuators from up to 30-50 feet away (open air). The control box has ...

The PA-33 is our single channel control box with an increased environmental protection rating. Using the RF remote provided, users have the ability to extend, stop, and retract their actuators from up to 30-50 feet away (open air). The ...

PR Series are multi-directional gantry type robotic systems which consist of cartesian X, Y and Z axes (can be used one or all of these axes), 6 axes robot can be connected externally. They have less metal construction than the GR Series ...

GR Series are multi-directional gantry type robotic systems which consist of cartesian X, Y and Z axes (can be used one or all of these axes) and 6 axes robot can be connected externally. Gantry systems, which can have 1,2 or 3 axes, ...