Other positioning stages

The RT-2 has a low profile coming in at just over 1.5" thick. The design takes advantage of a thrust bearing systems for the table movement. This design approach offers excellent stability and low cost. The RT-2 utilizes a worm gear drive ...

The 2-Footer holds the probe in a safe position over the device under test. It can be used with all passive PMK series of probes; standard and miniature build.

A portable, fast and accurate optical beam positioning system having a USB2.0 interface. The system is based on a 24 bit A/D electronics box, powered via the USB2.0 port. It offers simultaneous operation of one or two PSD's in ...

Optical Fibre alignment device: AS98 High stability optical fibre alignment device AS98 The easy-to-operate AS98 device allows an accurate positioning of your optical fiber to ensure an optimized stability alignment. AS98 fibre ...

This is a linear positioning table manufactured by Niasa which comes with a rack and pinion transmission. It comes with a simple design and robustness which transforms them into a functional elements for mechanization. This tool is equipped ...

DSM's FlexFrame PiezoActuator™ products are flexure-guided piezoelectric actuators that use lever mechanisms to mechanically amplify the motion of piezo ceramics. The flexures in each mechanism are designed to provide stable motion ...

The XRT-U 30 is a compact and precise rotation stage driven by an ultrasonic piezo motor. With the XRT-U 30, you can achieve error motions comparable to air bearing rotary stages, but in a smaller volume and for a lower price. Compared ...

Stroke : 6 mm - 200 mm

Details : Precision Linear Translation Stages with Good Performance at an Economical Price Index 1.Features 2.Comparision Table of Linear Translation Stage Models 3.Catalog1 of Linear Translation Stages, X-Stages (29 Pages, Rev01) 1.Features - ...

Stroke : 400, 175 mm
Speed: 4.8 m/s
Repeatability: 3 µm

• PnP cycle < 0.4 seconds • 100 million cycles maintenance-free • Highly rigid The standardised LMS M 2-axis system has two axes arranged crosswise, which are directly connected to each other for mass optimisation. The highly compact, ...

Stroke : 450, 800, 250 mm
Speed: 1 m/s
Repeatability: 75 nm

In the design of the XY Stage EZ-0117, particular emphasis was placed on a cost-conscious design combined with high accuracy requirements. The treads for the air bearings are covered with bellows to prevent the ingress of particles, making ...

Repeatability: 3.3, 2.3 µm
Stroke: 200, 305 mm
Speed: 20 mm/s

This inspection system consists of the XY-Stage KT470 on a granite structure with a manual Z-vertical unit. This combination is suitable for the flexible and modular design of production systems / inline processes for cleanrooms and can ...

Manual Rotary Stage After hearing our customers say ..."It would be nice if I could just turn the barb myself instead of using a motorized component" ... • Our Manual Rotary Stage design for OASIS 12048 and 12024 units has a double-sided ...

Carrying capacity: 0 kg - 150 kg

mobile with articulated arm • Mobile manipulator, similar to LiftCENT S, but it allows easy movement through the plant and between multiple operating points where the same or similar procedures are performed periodically • Leveling ...

Stroke : 13 mm

Features Fine Positioning via Micrometer Adjusters Array of 1/4"-20 (M6) and 8-32 (M4) Mounting Holes 13 mm (0.5") Deck Height Adjustment Grooved Top Plate Available (Compatible with Our Range of Flexure Stage Accessories) Black Anodized ...

With this very sensitive mechanical joystick micromanipulator, motion, even in the micron range, is possible. This micromanipulator is so stable and strong that it can accommodate even piezo-steppers. Joystick micromanipulators provide ...

Welding motorized stages are constructed in a maximum dimension of 80 x 130 mm. These are most commonly known as XY tables and are fabricated in aluminum materials. They are constructed in a swan neck design and are specially built for ...

Payload: 500, 1,000 kg

Model HAP1-500 HAP1-1000 Structure Turn Table Degree of Freedom 1 Payload 500 kg 1000 kg Drive Method AC Servo Range of Motion Rotation 1 ±365° Rotation 2 - Maximum Speed Rotation 1 120°/s 75°/s ...

Load: 100 g

Ultra-precise resolution enables operation in extreme environmental conditions. A rotational motor providing positioning of theta and phi. *Customization available

Belt drive Sizes: 60, 60S Mechanical linear unit with external roller guides. Due to the rectangular profile higher torques and loads can be taken up. In addition, a very high stability and low deflection are ensured for long axis systems. Repeating ...

Screw Driven Slides with Hand Cranks & Locks Available with Minuteman Self Lubricating Sleeve Bearings or Linear Ball Bearings Materials: Aluminum alloy: Top and Bottom Plates, rail supports, bearing pillow blocks and coupling. ...

Repeatability: 0.02 mm
Load: 3 kg - 120 kg

LINEAR MOTOR POSITIONING STAGE 1. High Suitable 2. Long Stroke 3. High Precision DESCRIPTION The linear motor stage can be used in variety of applications, such as assembly, grade transportation, dispensing, etc. Thanks ...

The LDS-1000 Laser Doppler Scale (LDS) provides high speed, high accuracy and long range positioning for single or multiple axis applications, such as linear motors, large gantry machines, CNC machine tools, CMM's, precision stages, Supermicrometers, ...

Y-Z Positioner for Lens, Pinholes and Objectives 5ZYP are compact mounts designed to precisely position optical components in the plane orthogonal to the optical axis. Ideal for microscope objectives, mounted pinholes, fiber optics chucks, ...

Stroke : 15, 25 mm

The G+ original wedge mechanism incorporating a track rail is adopted. The product permits vertical positioning with the maximum stroke length of 15 mm. G+ XYZ Wedge Elevating Table integrates Precision Elevation Table and Precision ...