Accuracy ±1.0%RH; 0.6℃ Range 0…100%RH, -40℃…+180℃ The BL798 is a rugged, accurate temperature and relative humidity probe. It measures relative humidity over the range of 0 to 100% RH and temperature over the range of -40°C to ...
Measurement accuracy ± 0.5μS to ± 500μS Two-electrode measurement method with temperature compensation. Measurement range from 20μS to 20000μS Max operating temperature 50 ° C Max pressure 10 bar Measurement transmission ...
Measurement accuracy ≤4% on the reading point Four-electrode measurement method with temperature compensation Measurement range from 1μS / cm to 200mS / cm Max. operating temperature 100 ° C Maximum pressure 5 bar Measurements ...
New - Sound intensity probe SIS 190 double New - Measurement of sound intensity in a very wide frequency range The sound intensity probe SIS 190 double allows a simultaneous sound intensity measurement in a very large frequency ...
Microtech Gefell GmbH
The sound intensity probe SIS 194 3D 1/4" allows a simultaneous sound intensity measurement at one point of a room in all three dimensions. For this purpose an arrangement of three one-dimensional sound intensity probes is formed, ...
Microtech Gefell GmbH
The sound intensity probe SIS 194 3D 1/2" allows a simultaneous sound intensity measurement at one point of a room in all three dimensions. For this purpose an arrangement of three one-dimensional sound intensity probes is formed, ...
Microtech Gefell GmbH
Measuring range: -60 °C - 60 °C
The exact monitoring of dew point temperature in compressed air systems, dryers for plastic and other industrial processes is becoming increasingly more important. Te dewpoint transmitter HLX371 with a measuring range -60...60°C Td (-76...140°F ...
Probe photoelectric probe or for probe integration. Up to five photoelectric probes can be connected. For OM5 control unit. 10m cable. PRODUCT FEATURES Decription - Spare photoelectric probe or for probe integration. Up to ...
Laser sensor is designed for non-contact measurement of geometric parameters of holes (diameter, ovality, roundness). • Diameter of the laser sensor body, mm: 8.5; 15 • Range of controlled diameters, mm: 9.2...19; 16...48 • Laser ...
The SEFRAM 97 has been designed and tested according to CE safety requirements for electronic measuring apparatus, EN 61326-1 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-8 CIS PR11 and other safety standard. The SEFRAM 97 is designed to ...
The 3D acoustic intensity probe is for localization of sound sources from 40 Hz. The compass consists of 28 acoustic intensity probes and shows in a 3D display via 3D vectors the direction of the noise sources. Due to the small size of ...
Magnetic probe MP laboratory probe magnets provide simple solution for detection and inspection of magnetic inclusions in bulk materials in laboratories of processing companies and universities. NdFeB magnetic system with intensity up ...
The simple LRS 1-50 conductivity switch indicates excessively high or low conductivity in the boiler, and can trigger a simple valve. As an option, controllers from the LRR 1-5x series can operate in conjunction with a simple conductivity ...
GESTRA AG
Design of the 3D-finder The housing of the 3D measuring probe is made of stainless steel and shows a lasered logo of the manufacturer. A plastic ring is embedded in the housing of the 3D-finder, which is equipped with RGB light. When ...
DESIN Instruments manufactures Thermocouples and RTDs since 1950. Until today we have manufactured more than 450.000 units of different types. We export to 21 countries-suppling products with very high standard of quality, to comply ...
Desin Instruments
Corresponds exactly to the directives of the TCO guideline for measurements of alternating electrical fields with reference to ground potential. ■ Ideal for the measurement of low exposure electrical installations. ■ Automatic recognition ...
The measurement principle of the SOMQUALITY-NTU turbidity sensor is based on infrared light scatter at an angle of 90°. Thanks to the measurementat a wavelength of 880 nm and the wide detection range of 0 to 4'000 NTU, the sensor can ...
The inline conductivity sensors for measuring the conductivity of liquid media combine a ceramic measuring cell with tried-and-tested ELSA push-in fittings and are primarily used in the food sector. Possible applications include, for ...
Near-field probes are without a doubt the most effective tool for debugging EMC issues. Near-field probes are used to locate the source of RF emissions as well as circuitry susceptible to RF. Near-field probes should be at the top of ...
TEKBOX
Transmitter for pH-Value and ORP APM-1 COMPACT-LINE Measuring range: Standard signal: 0(4) - 20 mA / 0 - 10 V, Redox: -1500 ... +1500 mV Pt100 / Pt1000: -50 ... +250°C, Resistance: 100 Ω - 3 kΩ pH: -2 ... 16 Input: 1x ...
KOBOLD INSTRUMENTATION
Z Axial Preset Gauge Better parallelism, sensitivit, and precision for use. Type:ZH-50A Height (mm):50.00±0.005 G.W.Weight (KGS):1.2 L ᵡ W ᵡ H(mm):50ᵡ63ᵡ63 Magnetism:O
ICP®, remote control, … Phased-match microphones pairs, all accessories availaible (windscreen, extension cables, handle, carrying case, …)
With this reference temperature sensors you can increase significant the measurement accuracy of the above mentioned LR-Cal temperature calibrators (-2I versions). The measuring range is 0°C...+1400°C. This makes this external sensor ...
Economic solutions for tool breakage detection and tool length measurement in CNC machining centres. Measurements of unrivalled speed and precision under the most adverse manufacturing conditions using a modern measuring mechanism based ...
Blum-Novotest
This stainless steel sheathed glass pH electrode is ideal for insertion into meat, cheese or similar. The knife probe can also be used in a variety of applications in the food processing and agricultural sector. Probe dimensions are Ø15 ...
Shipping Weight: 1 lbs. Stock: In stock The Passive Probe - Probe only is an affordable probe for locating and digitizing, suitable for hobbyist/occasional use Our passive probe is an affordable option for occasional and hobby use. ...
SenSpot™ wireless scour meter provides an easy way to install a scalable solution for measuring bridge scour, hydraulic damage, or slope stability. Bridge scour refers to the removal of sediment such as sand, soil, and rocks from around ...
It is used to continuously monitor and control the conductivity value/TDS value and temperature value of the aqueous solution. Widely used in power plants, petrochemicals, metallurgy, paper industry, environmental protection water treatment, ...
Please specify:
Help us improve:
remaining