Counters

237 companies | 876 products
airborne particle counter
airborne particle counter
ISO21501-4, ISO 14644, FS 209E, BS 5295, EC GMP | 3910/3905

The 3910 50 LPM model, and the 3905 1CFM model are manufactured by Kanomax, and is a portable particle counter that complies with the ISO 21501-4 and 21 CFR Part 11 standards. The units have a compact, and lightweight layout, and is integrated ...

See the other products
Kanomax USA
digital totalizer counter
digital totalizer counter
BA554E

-Large easy to read displays: 5 digit 12mm high 8 digit 18mm high -IP66 GRP enclosure, separate terminal compartment -Operating temperature -40°C to +70°C Display functions -20°C to +70°C -Internal calibrator -Root extractor ...

See the other products
BEKA
pulse counter
pulse counter
KC40

Mono-bidirectional impulse counter with a microprocess operating , four led digit display, two output relays .On the counter is possible to set : 2 set-points, 3 working modes on the OUT 1, 4 modes for the OUT2 ,and it possible to visualize ...

See the other products
ELETTROMECCANICA CDC s.r.l.
pulse totalizer counter
pulse totalizer counter
CS2-TM

CS2-TM-Pulse 10 Digital Rate/Batch Counter (Pulse) (96x48mm) The CS2-TM(Pulse Input) is innovation totalizer. ● Adtek builds in high technology with wide input range from 0.01Hz~ 140.00KHz with auto-range function at same unit. ...

batch counter
batch counter
CS2-CT

5 Digits Multifunction Counter (Pulse Input) (96x48mm) The CS2-CT provides high speed and multifunction, counting, control and communication (Modbus RTU mode) of Pulse from flow meter or encoder, proximity switch, photo switch for ...

pulse counter
pulse counter
CS2-MC

10 Digits Multifunction A/B Phase Counter (96x48mm) The CS2-MC provides dual input(A/B phase) and display with high speed, counting, control and communication (Modbus RTU mode) of Pulse from encoder, proximity switch, photo switch ...

oil particle counter
oil particle counter
LaserNet 200 Series

LaserNet 200 Series - Automated Wear Debris Analyzer LaserNet 200 Series is a contamination and wear debris analyzer that monitors lubricant condition for predictive maintenance. The LaserNet 200 Series allows reliability professionals ...

cell counter
cell counter
Somacount FCM

The Somacount FCM delivers the ultimate efficiency and accuracy in early mastitis detection. This instrument provides a rapid and accurate count for the SCC (somatic cell count) in dairy milk. This instrument represents the latest in ...

See the other products
Bentley Instruments
cell counter
cell counter
Somacount FC

The Somacount FC delivers a rapid and accurate measurement of somatic cell counts (SCC) for early mastitis detection in dairy milk. This proven system is designed for reliability, ease of use and precision measurements. This instrument ...

See the other products
Bentley Instruments
liquid particle counter
liquid particle counter
BactoCount IBCm

The BactoCount IBCm is a semi-automated instrument that uses flow cytometry for the rapid enumeration of individual bacteria and somatic cells in milk. The rapid test for bacteria makes it an ideal solution for any processing plant or ...

See the other products
Bentley Instruments
optical particle counter
optical particle counter
Aeroqual Dust Sentry Pro

The Dust Sentry Pro is a multi-channel particle analyser for real-time dust and aerosol profiling. This instrument is specifically designed for monitoring outdoor air quality and more specifically dust fractions and particle sizes. The ...

See the other products
CleanAir Europe
digital particle counter
digital particle counter
MET ONE GT-521

CleanAir Europe offers the Met One GT-521portable particle counter for rent. The GT-521 allows the user to select particle sizes with two programmable count channels ranging from 0.3 to 10 microns, each displaying differential or cumulative ...

See the other products
CleanAir Europe
digital particle counter
digital particle counter
MET ONE GT-521S

The GT-521S is a full-featured, battery-operated, portable particle counter that offers the functionality of a benchtop unit with the convenience of a handheld computer. The GT-521S allows the user to select particle sizes with two ...

See the other products
CleanAir Europe
pulse counter
pulse counter
F3X

The F3X instrument is a mono-bidirectional display unit with microprocessor with five-digit with sign display (reading scale ± 99.999). It is particularly suitable for the measurement of linear and angular dimensions with signals supplied ...

See the other products
FIAMA
hour counter
hour counter
AC 632 A.2

Beside the standard program BAUSER offers you a range of individual special developments. Inform us about your requirements and ideas – we find a solution for you. Our developing and production know-how is excellent. This was certified ...

See the other products
BAUSER
colony counter
colony counter
PSF-1100

Low-cost model with the functions necessary for general colony counting.

See the other products
Shashin Kagaku
colony counter
colony counter
PSF-2100

All-round model not only for research and inspection but also for various applications.

See the other products
Shashin Kagaku
colony counter
colony counter
PSF-5100

High-end model with a good balance of performance and cost. Ideal for counting small colonies.

See the other products
Shashin Kagaku
air particle counter
air particle counter
TES-5110

• Six particle size channels : 0.3iim, O.5pm, 1.Opm, 2.Opm, 5.Opm, lOpm • Integrated temperature / humidity sensor (no need for extemal add-on). • Flow rate 2.83 L/minute (0.1 CF/ minute). • Rechargeable battery provides up to 4 hours ...

air particle counter
air particle counter
TES-5200

• Particle mass & particle counter in a single handheld unit. • Six mass ranges and eight particle sizes. • User K-factors setting for special particulate with different densities. • Integrated temperature / humidity sensor (no need ...

pulse counter
pulse counter
TDI340

S0 pulse counter with 4 isolated digital inputs and IP40 protection. TDI340 is an S0 pulse counter with MODBUS RTU interface. It has 4 isolated digital inputs. The inputs complying with the S0 standard 62053-31. The counter works in ...

hour counter
hour counter
SCR 007

-Counting meters of product production -Display of production speed (meters per hour) -Operating hours counter -Selectable production estimation time -IP65 front protection -Supply voltage ... 24 VAC -Output contacts .... Max. ...

See the other products
Automatismos Control y Programación, S.L.
pneumatic counter
pneumatic counter
CCPN

The pneumatic stroke counter, installed in the air supply line of the pump, allows the indirect measurement of the amount of product pumped by pneumatic pumps to on / off cycle (both automatic and with external control panel). It has ...

pulse counter
pulse counter
BU PULSE series

pulse counter
pulse counter
JUNIOR-D / JUNIOR20-D

JR/JR20-D digital meters accept inputs from high voltage (10 V – 600 V AC) signals, contact switch signals, TTL/24V encoder inputs, and sensors of the magnetic, PNP, NPN and NAMUR type. These models can accept all commonly used transducers ...

See the other products
DITEL
stroke counter
stroke counter
M47G

Figures 7 Size of figures 4.8 mm Max. Speed 300 cpm Oscillation angle 42º Special for billiards, vending, coffee machines, ... etc.

See the other products
TALLERES EMIT, S.A.
pulse totalizer counter
pulse totalizer counter
103D

Displays Rate, Total and Accumulated Total Loop DC Powered Watertight to IP67 (Nema 4X) Wall or Pipe, Panel mounting Fully programmable 4-20mA output High and Low Flow Rate Alarms CE compliant Pulse Output Ideal ...

pulse counter
pulse counter
TBS12PC

The TBS12PC LoRaWAN pulse counter module brings LoRa wireless connectivity to pulse sensors, empowering the long-range capability of LoRa along with flexible configuration. It is available in 2 variants depending on the targeted application: ...

pulse counter
pulse counter
FX3 series

High speed counter modules. FX3 series high speed counter modules can also be connected.

people counter
people counter
PCN-1001

Passenger Counter is a compact and autonomous device based on non-contact stereoscopic vision technology. It has been specifically designed for passenger counting above the doorways of buses and trains; it can also be used to count people ...

hydraulic fluid particle counter
hydraulic fluid particle counter
LCM series

The Parker icountLCM30 is a next generation fluid system particle contamination monitoring offering an under 90 seconds test procedure. Multi-standard ISO, NAS, AS and GOST cleanliness reporting, data entry and integral printing are all ...

See the other products
Parker Hydraulic and Industrial Filtration Divisio
digital airborne particle counter
digital airborne particle counter
MET ONE 3400+ series

Our new MET ONE 3400+ Series Portable Airborne Particle Counter allows users to load their routine environmental monitoring SOP sampling map and sampling configuration for each location directly into the counter, so that the SOP becomes ...

See the other products
Beckman Coulter Life Sciences - Particle
multifunction counter
multifunction counter
H7BX series

DIN 72×72 mm Multifunction Counter with a Bright,Easy-to-view, Negative Transmissive LCD. • Highly visible display with backlit transmissive LCD. • Selectable display color (red/green) enables checking output status at a distance. • ...

pulse counter
pulse counter
PXIe-2461

The Astronics Test Systems PXIe-2461 PXI is a high-performance, 2-channel, universal 235 MHz Universal Counter/Timer. Occupying a single PXI Express periphal slot or hybrid slot, the frequency & time interval/counter (FTIC) offers eleven ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us