Integrated control technology for the COMBIVERT H6 The COMBIVERT H6 product range is a multi-axis drive system with a high power density. Its modular design is DC-coupled and can therefore be adapted to the respective requirements. ...
•Analog and digital controller •4 or 8 lines, up to 32 detectors •Up to 32 fully programmable relays (OR, AND, NAND, NOR, Voting functions) •Large graphic display •Remote modules (cost savings on wiring installation) •USB ...
Teledyne Gas And Flame Detection
•Analog and digital controller •1 or 2 channels, up to 8 detectors •Fully scalable •5” LCD back-lit graphic display •Five programmable events per detector •Smart keys make embedded multi-language ...
Teledyne Gas And Flame Detection
Presentation of the control unit The MX 256 is a digital control unit intended for the detection and measurement of gases present in the atmosphere and more generally for the processing of any digital signal from digital sensors (OLCT ...
Teledyne Gas And Flame Detection
The riveting control is performed by the standard C-500 unit. Optionally other more sophisticated controls like the AC quality assurance systems can be integrated. The riveting management can be done through different agile, efficient ...
Pneumatic controls for 1,2 & 3 ways with warning light for PTO engagement or to operate over the tipping valve.
2& 3 ways pneumatic controls with warning light for PTO engagement or to operate over the tipping valve. Combined with appropriate tipping valve, enables proportional control for lowering dump bodies.
Tipping pneumatic control valves. Tandem mounting of different elements.
Protection against overflow Protection against out of liquid functioning Fast adaptation of electronics Rod-type level probes in conjunction with electronic control units ensure that important process parameters are controlled and monitored ...
Galvatek
Maximum temperature: -200 °C - 850 °C
Monitors temperature for a set limit value To install in a control box On 35 mm mounting rail The temperature limiter ETB200 monitors the temperature of liquids with a set limit value. The TF24 probe connected to the ETB200 is a ...
Galvatek
Compact, simple to use, ready to plug Digital display IP55 NEW : now compatible with level probes with float switches or conductive ones A simple solution for regulation : this PID digital display control box (with input PT100 3 wires) ...
Galvatek
Gessmann’s master controller system MC 01 is specially designed for usage in railway applications. Their robust design which is based on the relevant standards EN-60077, UIC 612 and EN-50155 guarantees low life cycle costs and a maintainability ...
SAFEMASTER PRO - The configurable safety system - universal and expandable The modular and configurable safety system SAFEMASTER PRO monitors all safety circuits of you machinery and installations – in a simple, flexible and safe way. ...
• Switch programmable multifunction input and outputs • Easily extended on site modular system • Master E stop control function • Multiple start inputs The SAFEMASTER M control module functions like a small safety PLC by controlling ...
Control panel MGB-...-PN with 13 control elements, push-pull plug, connection for stack light, RC12 • Emergency stop according to ISO 13850 • 6 illuminated pushbuttons • 6 selector switch, 3-stage, illuminated • ...
EUCHNER GmbH + Co. KG
• Emergency stop according to ISO 13850, illuminated • 9 illuminated pushbuttons • Operating mode selector • Connection via 7/8" and M12 plugs • including terminal plug for stack light (M12, 5-pin) • ...
EUCHNER GmbH + Co. KG
Read head CES-A-LCA..., hard-wired encapsulated cable 10 m, PVC • Cube-shaped design 42 x 25 mm • Hard-wired encapsulated cable made of PVC • Cable length 10 m • Two safety screws M4x14 included Housing material PE-HD plastic ...
EUCHNER GmbH + Co. KG
XTDB019 Residual Direct Current monitoring module (RDC-M - Module) XTDB019 is a residual direct current monitoring module (RDC-M-module) which, electrically coupled to a protection unit or switching unit, performs the function of ...
The screen in this series displays two lines of text. It is lightweight, cost-effective and easy to control and supports a range of communication protocols. Specifications STN LCD 2.8" 160*32 pixels 256K Flash Memory 16 multiple ...
Pressure control panels for high flow rates For non-corrosive industrial gases Ergonomically designed Modular design (to be extended to 1x2, 1x3, 2x2, 2x3 etc. cylinders) Filter at the process gas inlet valve Central filter in the regulator Regulator ...
Spectron Gas Control Systems GmbH
Connection: 110V / 230V 50Hz. 10VA Input resistant:5QQ Actual value input: 4-20mA Output as power supply (or the transducer 24VDC / 80mA Ambtent temperature: -10*C *40*C Plastic case 144.72.165 mm for switch board mountng Controlled variable ...
RTK Regeltechnik Kornwestheim
This advanced model improves upon the performance of the Light plus with increased storage capacity and the addition of a touch panel for intuitive operation. The operator can also easily enter or change precise settings and values from ...
Estic Corporation
This is the entry level model for the Handy 2000 Series. The display panel comes equipped with large 7-segment LEDs for improved visibility, and green and red color-coded judgement indicators to clearly inform the operator if all is okay ...
Estic Corporation
A dedicated interface unit for cordless tools; this model features EWT wireless transmission technology, which complies with the international standards set forth under IEEE 802.15.4. Tools can be set up quickly and easily through infrared ...
Estic Corporation
The controller model MPS-2 conforms to the safety requirements which must be applied according to the EC Machinery Directive 2006/42/EC and to the standards for the safety of pneumatic presses. MPS-2 two-hand controls fulfil all requirements ...
A high-performance measuring device rounds off the concept for rotor and stator core production for the pump and oil industries. A high-definition camera provides a 3D image of the workpiece geometry and the data can be synchronised simply ...
The Control Module is a self-contained functional unit for pressure-controlled fluid injection in the GIT process, and can be adapted to all injection molding machines, independent of the type and manufacturer. After receipt of the start ...
The Compressor Control Module is a self-contained functional unit for pressure generation, as well as pressure-controlled fluid injection in the GIT process, and can be adapted to all injection molding machines independent of the type ...
Maximator Customized Wellhead Control Systems allow the complex structure of the wellhead equipment to be controlled at deep sea levels – a fundamental requirement for oil and gas production in difficult-to-access reservoirs and complex ...
Very high data rates up to 100 kHz each channel 100 kHz at 8 channels (2 each UART line), 10 kHz at 128 channels Ethernet interface for configuration and data output 1 Gig-E, TCP/IP, UDP, up to 16 MB/s Modbus TCP/IP, ASCII, High ...
High-performance controller for high-speed data acquisition 100 kHz with 8 channels, 10 kHz with 128 channels Scalable to 64 DAQ modules 4 UARTs for connecting 4 x 16 DAQ modules Configurable Ethernet interface 1 GigE, ...
High-performance controller for high-speed data acquisition 100 kHz with 8 channels, 10 kHz with 128 channels Scalable to 64 DAQ modules 4 UARTs for connecting 4 x 16 DAQ modules Configurable Ethernet interface 1 GigE, ...
The Unimotive range is specially designed for applications in the automotive industry. The temperature control systems are constructed for operation with water-ethylene glycol mixture with corrosion protection (for example Glysantin®) ...
Huber Kältemaschinenbau SE
Working temperature: -40 °C - 200 °C
The Petite Fleur models are the smallest dynamic temperature control systems in the Unistat range. As with all Unistats, the Petite Fleur models have unique thermodynamic properties for the highest temperature control speed and precision. ...
Huber Kältemaschinenbau SE
Working temperature: -40 °C - 200 °C
The Petite Fleur models are the smallest dynamic temperature control systems in the Unistat range. As with all Unistats, the Petite Fleur models have unique thermodynamic properties for the highest temperature control speed and precision. ...
Huber Kältemaschinenbau SE
Control units for improved working environments and lower energy consumption Control units comprise specially adapted and tested components. A well designed system provides important benefits for the user: • Automatic systems provide ...
Control units for improved working environments and lower energy consumption Control units comprise specially adapted and tested components. A well designed system provides important benefits for the user: • Automatic systems provide ...
DRIVON, designed to be used in different types of applications (especially pumps, fans and conveyor belts) consists of extremely reliable components and is controlled by our software that provides excellent performance with special attention ...
MOTOVARIO
A compact 240V DC proving unit supplied with carry case, essential for proving voltage indicators and voltmeters before and after use. Powered from an internal battery supply (batteries not included) so the use of a known supply point ...
Red Lion’s Graphite® Crimson® Control Module plugs into Graphite HMIs to form an all-in-one industrial solution that combines communication, control and visualization capabilities to reduce cost and ease operations. Crimson Control, ...
Red Lion Controls
The freely programmable Saia PCD1.G1100 module allows you to control light and shade, either as an independent miniature controller or as a module in conjunction with a higher-level controller. It has four digital inputs as well as two ...
Saia Burgess Controls ( SBC )
The programmable analogue module with a housing width of 35 mm (2 HP) has four inputs and outputs. Each input and output is electrically separated and can be configured separately. Small and purely analogue tasks such as recording the ...
Saia Burgess Controls ( SBC )
The freely programmable module with a housing width of 35 mm (2 HP) can be controlled via RS-485 and enable the direct control of 64 DALI subscribers. It has the DALI line as well as four digital inputs. The user can implement the digital ...
Saia Burgess Controls ( SBC )
• Inventory and batching control terminal • High sample rate, up to 70 samples per second • Up to two serial ports with printing and networking (one standard) • Two opto-isolated weight setpoints • Large 6 digit LED display • Alibi ...
Cost-Efficient and Energy-Efficient The C5S process controller is designed for simple screwdriving tasks, providing precise control through torque current measurement. As a versatile screwdriving controller, it can be optimally paired ...
WEBER Schraubautomaten GmbH
For Handheld and Fixtured Screwdriving Technology The C10 serves as a dedicated feed control for the pneumatic handheld screwdriver HSP, while the C15 model can control not only handheld screwdriving systems but also, to a limited ...
WEBER Schraubautomaten GmbH
Current Control or Torque/Rotational Angle Sensor The C30S process controller was designed to tackle complex screwdriving tasks. With a wide range of open interfaces (including digital, Profibus, ProfiNet, and Ethernet IP), it offers ...
WEBER Schraubautomaten GmbH
Please specify:
Help us improve:
remaining