Other network communication equipment

This 1351 System Controller provides 26 multi-function I/O for application in stand-alone or CAN connected systems. With ample user code space, OEMs can use the Model 1351 to develop a wide range of vehicle and system control applications ...

Wired HD320A code reader has a built-in motion sensor, thanks to which the device can operate in an automatic way. All you have to do is bring the bar code closer to the scanner and the reading will be automatic. The scanner reads all ...

With the CAN-IB500/PCIe HMS offers a CAN FD interface based on a modern and modular architecture concept. The interface has one CAN channel which can send and receive either CAN FD (ISO or non ISO format) or CAN 2.0A/B messages. Features ...

Cloud Monitoring Communication Module is an ETHERNET communication protocol switch module which can achieve genset (with SCI) connect to Internet. After logging into cloud server, module will receive corresponding genset controller communication ...

Synchronizing meter with LED 96x96mm They measure the phase difference (Δφ) between a generator and the network, showing its condition (lead or lag) until the synchronicity situation (phase displacement Δφ=0°) ...

Accessory charging & communication for smart earbuds Features - Show battery level of charging box on phone - Automatically pair TWS with phone when opening charging case - Accessory firmware updates Benefits - Simultaneous battery ...

Screen size: 10.4 in

The POLARIS Panel PC 10.4" is the logical further development of the BAT 600 but still retains downward compatibility. State-of-the-art TFT technology is used for the display, which attains a brightness level of 450 cd/m² in Ex applications. ...

The iTN221 is a “Pizza Box” 1.5U (full ETSI) sized, next generation multiservice access node. It offers a dual core architecture for both packet and SDH/TDM transmission. The iTN221 supports up to 2 x 1G and/ or 2 x STM-1/4 uplink capacities, ...

Screen size: 15.6, 18.5, 23.8 in

Industrial displays HMI solution of the latest generation for optimised us The latest monitor solutions of the OPD9000 series from ADS-TEC are optimally equipped for new future-oriented software applications due to the full HD display ...

The smallest of our T24 radio telemetry enclosures, the wireless sensor transmitter IP50, provides high performance telemetry measurement electronics for strain gauge, pressure, load cell, linear displacement and other 4 wire bridge sensors. The ...

IntelliNode™ Interface Module IntelliNode Interface Module enables intelligent electronic devices not of S&C manufacture to function as team members in an IntelliTEAM SG™ Automatic Restoration System. The module does not add new features ...

Used in general elevator, CANBUS communication digtial and analog control; Double CPU design,safer and more reliable Main Features ● 32-bit high performance industrial class ARM MCU ● Double CPU design, safer and more reliable ● ...

-Modbus Protocol - Slave -Optional RTU or ASCII Modes -Selectable Baud Rate -Default Mode for easy access -RS485 Address set on "DIP" switch -Serial Interface (RS232/485) for Omni8/16C Annunciators Omni8/16C Serial Interface RS232/485 ...

-Channel spacing 100GHZ (0.8 nm) up to 48 channels can be multiplexed -Low insertion loss, insertion loss ≤5dB, typ 4.5dB -High channel isolation, adjacent isolation ≥25dB; non-adjacent isolation ≥35dB ...

Additional board for door-entry phones art. 2708W/A and 2738W/A for call repetition and for an additional button with voltage free contacts. Cable for connection to the main board and fixing screws provided.

Industrial RS-422/485 Isolated Rail Repeater Ethernet Direct offers industrial grade media converters serial converters and device to allow devices with different serial interfaces to communicate easily. The serial media converters ...

NORDIC ID NUR modules are developed by Nordic ID and are available for anyone wishing to build their own RFID reader solution. We provide the module in different formats; as an SMD component or mounted on a PCB for easier integration. ...

RocketPort ® EXPRESS Quadcable DB9MThis RocketPort EXPRESS Quadcable DB9M is a four port serial adapter with communication speeds up to 921 Kbps and is designed for standard and low-profile PCsPart Number: 30126-4 PCI Express serial ...

As Profibus DP slave the module provides a gateway function from EtherCAT to PROFIBUS DP. In order to exchange data between the EtherCAT system and a PROFIBUS DP system the E I/O DP-S.GSD file is required to configure the Profibus master.

The SEL-3390S8 Serial Adapter is a PCI Express (PCIe) expansion card that is part of the SEL dependable computation for critical infrastructure computer line. It has been designed, built, and tested for use in harsh industrial and substation ...

CHARACTERISTICS Controlled devicesManifold Digital Input Ml 2/M8 - Output M12 Handling capacityMax 64 Inputs + 64 Outputs Max 64 Inputs + 96 Outputs (ProfiNet) Integrated configurationBD series (VDMA) 18 • 26 mm P10-PI5 series ...

For joysticks, a range of interface cards that will convert the potentiometric output of the joystick into mouse compatible data, and allow easy connection to industry standard mouseports including PS2, USB and RS232. For trackballs, ...

The HVB16VDA3 is a video distribution amplifier featuring 16 groups of input/output channels. Each group can be configured as a single 1 x 3 video distribution amplifier for a total of 16 inputs and 48 outputs. If additional outputs are ...

Description HM-MDC Modular Data Center Solutions is a new generation infrastructure solution for large and medium sized data center. HM-MDC adopts highly integrated design, which integrates subsystems such as cabinet, power supply, ...

Open programmable and configurable FSoE master module for operation on EtherCAT networks Easy integration of safe drives (Safe Drive Profile) Fast-channel task with guaranteed processing time of 4 ms Safety control unit ...