Other network communication equipment

Expansion unit for connection to the most common industrial Field-Bus systems for diagnostics and data communication Features Operating temperature (°C) - - 10 ... 55 Signalling - LEDs indication for operating status and fault diagnosis Connections ...

For any application requiring to safely manage analogic sensors such as loading cells, pressure switches, temperature measurements, flow and level measurements, etc. Works with Mosaic M1S and Mosaic M1S COM Main Units only Features Safety ...

Screen size: 3.5 in

The NK03 is 3.5” keypad HMI equipped with ARM 9 (400MHz) CPU, 128MB SDRAM, 128MB Flash and rich communication interfaces, including RS-232/422/485, USB (host/device), and Ethernet port. The system comes with function and numeric keys, ...

Screen size: 4.3 in

The N04 is 4.3” HMI equipped with ARM 9 (400MHz) CPU, 128MB SDRAM, 128MB Flash and rich communication interfaces, including RS-232/422/485, USB (host/device), and Ethernet port. The system comes with 4 wire resistive touch, IP65 front ...

Screen size: 7 in

The N07 is 7” HMI equipped with ARM 9 (400MHz) CPU, 128MB SDRAM, 128MB Flash and rich communication interfaces, including 3 serial ports (RS-232/422/485), USB (host/device), Ethernet port, and SD Card slot for expansion. The system comes ...

To configure systems which enable a single light source and spectrometer to make multi-point serial measurements, Avantes offers the FOM fibre-optic multiplexer. The device is available in three different configurations: 1 input to 16 ...

Communications gateway designed to convert an RS-232/RS-485 physical environment to Ethernet and/or Wi-Fi in order to connect to Line-CVM and Line-M expansion modules. Allows using a single IP to connect to and configure all the devices ...

Digital panel instruments, which, according to the model, display the value of a measured electrical variable or proportional value of a process signal. Devices designed for supervision, regulation and control, using built-in analogue outputs ...

CEM-M are interchangeable communication modules for the CEM-C energy meters assembled on DIN rails. These modules can increase the performance of the energy meters, so that any meter can be adapted to the communication systems in place ...

Bar code laser reader. Reads any one dimensional code. For use with a U·dat, U·dat Power+ and U·dat for NEX·U·® MOBILE and COMPACT systems.

DESCRIPTION The VISOR® Code Reader from SensoPart easily reads bar codes of numerous types as well as printed and direct marked data matrix codes according to the ECC 200 standard, regardless of the carrier materials (metal, plastic, ...

Screen size: 4.3 in - 15.6 in

C6 HMI operating panels handle visualisation and operation tasks for machines and systems. Graphical user interfaces can be produced with the COMBIVIS studio HMI development tool and its wide variety of functions. Two different ranges ...

Screen size: 5.7 in - 15.6 in

The C6 HMI LC is a panel system that combines visualisation, control and remote maintenance for machines and systems in one device. Visualisation is operated via the resistive touch screen display. Graphical user interfaces can be produced ...

Screen size: 7 in - 15.6 in

Visualisation, application automation and remote maintenance with scalable, graded, functional properties in the runtime environment – the C6 S14 automation system combines these features in just one device. The real-time control system ...

Robin‘6 Fully Managed AGV/AMR Communication Device Robin'6 is a cutting-edge, all-in-one platform designed for secure data communication across mobile robot fleets. Unlike traditional wireless communication solutions, Robin'6 is specifically ...

The Jump repeater for radio remote controls is designed for use with the radio control solutions of UD and RadioSafe series. The repeater relays a known radio message, thus significantly increasing radio coverage. The Jump radio signal ...

4-port Server-grade Gigabit 802.3at PoE+ Card with M12 x-coded Connectors + Intel® I350 server-grade Gigabit Ethernet controller + Four M12 x-coded connectors with patent-pending housing design + x4, Gen2 PCI Express interface offering ...

USB multisensor interface - 9206 In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB ...

CANopen is an open and flexible high-level protocol with more and more applications. Based on the CAN bus, it combines low cost and high performance, and provides an attractive distributed control solution for industrial automation, medical ...

Product Feature: CT-7220 Power Supply Extension Module 5V/2A ◆ System Power and Field Power Extension ◆ System Power Output 2A@5VDC ◆ Field Power Extension 8A Current ◆Take no module channel(replace CT-7221) General parameters System ...

CT-5341 Profibus DP Master module 1 Module Description The Profibus-DP master module supports 1 DP interface, supports the standard PROFIBUS-DP V0/V1 protocol, and supports the Profibus-DP master working mode. In combination with the ...

Customer-specific Solutions: Schlegel Fieldbus Interfaces Schlegel control and signalling units can be connected via fieldbus interface to the most common fieldbus systems (AS-Interface, CANopen, Profibus DP etc.) . We offer a wide ...

• Two types: 1 for 5 fans and 1 for 30 fans, can be managed at once • Simple intuitive user interface • Enable operation, schedule, fan grouping and naming • Centralized & multizone remote control

Serial Port - COM x 3 (DB9) Standard USB Port - USB x 6 (USB 3.0) PoweredUSB Port - 12V PoweredUSB x 1+ 24V PoweredUSB x 1 LAN Port - LAN x 1 Display Port - VGA x 1 + DP x 1 CR Port - CR x 1

The data communication plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanically isolated output. The card must be placed in position B5. If during the use of the device appear new requirements to increase ...

The data communication plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanically isolated output. The card must be placed in position B5. If during the use of the device appear new requirements to increase ...

Module of a double stabilized power supply, assigned to supply the bus as well as sensors. bus power supply 5 VDC/1 A sensors excitation 24 VDC/1 A width - 72 mm power supply 100…250 V AC/DC

@ctiveIO I/O modules: smart intelligence for your system Our @ctiveIO I/O modules are as different as your individual automation solutions. Two sub-modules are combined in one module respectively in this smart system. You can thus ...

Screen size: 7 in

SENECA expands its offer for the Z-PC Series, the distributed I/O system launched on the market in 2000, with VISUAL, the new range of scalable and robust operator panels suitable for all kinds of industrial applications. The terminals ...

Screen size: 4.3 in

SENECA expands its offer for the Z-PC with VISUAL, the new range of operator panels suitable for the most common industrial controllers and supervisory/automation systems. TECHNICAL DATA Format - 16:9 Brightness - 500 cd/m2 Contrast ...

Screen size: 7 in

SENECA expands its offer for the Z-PC with VISUAL, the new range of operator panels suitable for the most common industrial controllers and supervisory/automation systems. TECHNICAL DATA Formato - 16:9 Luminosità - 350 cd/m2 Contrasto ...

Bus module MGB-B...-PN... with 3 controls and indicators, push-pull plug • 1 cover for indicators • 1 operating mode selector • 1 illuminated pushbutton • including adhesive labels • Push-pull plug • Pre-assembled on mounting plates Connection ...

Bus module MGB-B...-PN... with 6 controls and indicators, 7/8" and M12 plugs, RC12 • Emergency stop according to ISO 13850, illuminated • 4 illuminated pushbuttons • 1 selector switch, 2-stage, illuminated • Connection via 7/8" and ...

• For connecting MGB2 or MCM modules • Connection via plug connector M12, D-coded and L-coded • Remote or direct mounting • Integrated switch • Compatible with all Modular devices Plug connector M12, D-coded (M12 plug, L-coded, ...

Screen size: 80 mm - 260 mm

- Using high-definition, high-brightness display LCD, the maximum viewing angle reaches 170 degrees; - Possess powerful embedded operating software, namely edge computing software; - Remote configuration of field device data is possible ...

Screen size: 4.3, 7, 10.1, 15.6 in

- Favorable price/ performance ratio. - Updated design. - High resolution. - Industrial ABS plastic case. VEICHI VI30 series, a new generation of human-machine interface in industrial ABS plastic case, whose new molding brings higher ...

Screen size: 4'03"

VEICHI VI30 series, a new generation of human-machine interface in industrial ABS plastic case, whose new molding brings higher cost performance and redesigned front face brings look together with high resolution. Key Features： 1. ...

The new International Standards IEC61850 defines a communication protocol oriented to the supervision, control and protection for the generation systems, transmission and distribution of electricity. These are some of the main characteristics: - ...

Profibus DP V0 interface module The MCIPRO485 is an external interfacing unit which permits to connect a FRER multifunction meter (fitted with RS485 interface and ModBus RTU protocol) to a ProfiBus DP V0 protocol system. This device ...

RS485 Modbus Communication module for MID Energy meters Communication module for MID meters C35-C70 with optical port. RS485 Modbus RTU - 1 DIN module

MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package stable firmware based on Linux 27 available input/output modules 60 logical channels colour LCD display 3.5" TFT, with touchscreen recording ...

The Multicon are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. MultiCon CMC‑141 has all features included in CMC-99, but in addition it ...

As a result of extending the range of functional applications of the MultiCon product line, the CMC-N16 wall mounted model has been designed. The new IP 65 enclosure allows using the device in harsh environments, where safe installation ...