Screwdriver Slot Stud Type Needle Roller Bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the Stud Type Series is limited by the moderately sized stud. Manufactured from High-Alloy Bearing ...
ACCURATE BUSHING
Hex Head Stud Type Needle Roller Bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the Stud Type Series is limited by the moderately sized stud. Manufactured from High-Alloy Bearing quality Steel.
ACCURATE BUSHING
Crowned Bearings recommended where the track or cam may impact excessive thrust loading on the bearing due to misalignment.
ACCURATE BUSHING
Outer diameter: 1.5 in
Inside diameter: 0.88, 0.89 in
Solid rollers have a smooth surface and are permanently bonded to a steel insert. The steel insert provides rigidity and allows the user to customize the mounting configuration based on the application. Rollers are available in neoprene, ...
Fairlane Products
Outer diameter: 2, 2.5, 4 in
Inside diameter: 1.25 in
Finned rollers have grooves on the surface and are permanently bonded to a steel insert. The steel insert provides rigidity and allows the user to customize the mounting configuration based on the application. The grooves create less ...
Fairlane Products
Outer diameter: 1.5 in - 6 in
Inside diameter: 0.5 in - 0.51 in
Solid rollers have a smooth surface and are permanently bonded to a steel insert with the bearings held into place with snap rings. Rollers are available in neoprene, nitrile and urethane materials with hardness ranging from 20 to 95 ...
Fairlane Products
The rod end sleeve bearing includes a head with a one-piece rod end that forms the rod end of a spherical plain bearing. Typically, rod end bearings have a left or right female(female)or male (male). Joint bearing with load capacity, ...
The rod end sleeve bearing includes a head with a one-piece rod end that forms the rod end of a spherical plain bearing. Typically, rod end bearings have a left or right female(female)or male (male). Joint bearing with load capacity, ...
The rod end sleeve bearing includes a head with a one-piece rod end that forms the rod end of a spherical plain bearing. Typically, rod end bearings have a left or right female(female)or male (male). Joint bearing with load capacity, ...
Roller bearing for inspection machines suitable for SGCC, EMHART, OI equipment we provide rollers fitted with ball bearings and covered with a PU (vulcolan) coating with 90 - 95 Shores A. Technical characteristic : PU coating directly ...
ROLLER BEARINGS FOR INSPECTION MACHINES Roller Categories: Glass factory, Inspection machines, Spacers / Conveyors DESCRIPTION Product description PU coating Shore hardness 90-95 A
Italplant high capacity roller has been designed mainly for cam mechanisms as well as to satisfy specific use conditions where both torque and dynamic forces assume some significant values. Generally high intensity shocks follow these ...
The main feature of this range of rollers is the high thickness of the outer ring, suitable to withstand the high specific pressures and shocks arising from the use of these bearings such as pressure rollers, camshafts, conveyor rollers, ...
Outer diameter: 10, 60, 80, 120 mm
The driven version of TRAPOROL's all-side rollers can be mounted around the axles. The rollers are extremely robust and ensure smooth and trouble-free handling during conveying, turning and pushing. TRAPOROL’s polydirectional rollers ...
Rod ends and spherical bearings “JOINBAL”. Characteristics: High misalignment angle High load admissible Long operating life Self alignment High safety Available types: Steel on steel Steel on bronze Steel on PTFE (maintenance free)
SIT S.p.A.
Outer diameter: 36 mm - 49.5 mm
Load capacity: 0 daN - 840 daN
Rollers for TWIN-RAIL production lines Outer casing in polyacetal Nitrile rubber seals Outer and inner rings with heat and surface treatments to reinforce resistance to loads and corrosion. Balls in 100Cr6, cage in polyamide Special ...
CGR Roulements
Outer diameter: 40 mm
Load capacity: 0 daN - 525 daN
Housing, inner ring, spacer with heat and surface treatments to reinforce resistance to loads and corrosion. Seals in Viton®, Balls in 100Cr6, Special lubricants for the food industry (halal and kosher on request). SOLVING THE ISSUE ...
CGR Roulements
Outer diameter: 36 mm - 49.5 mm
Load capacity: 0 daN - 840 daN
ROLLERS WITH ANGULAR CONTACT FOR MONO-RAIL PRODUCTION LINES Geometric studies have been used to optimize load distribution. Angular contact ball bearings are filled with an optimized number of balls on both rows. The points of contact ...
CGR Roulements
DIN ISO 12240-4 Series K Female thread steel/bronze coupling, self-lubricating
Chiavette Unificate S.p.A.
Transport rolls for the forwarding Number of rolls: 2 Dimension: 0.6 - 2.0 mm
This high carbon stainless meets aerospace quality. With ball end configuration .0006mm tolerance always parallel and easy to install.
R-G ball joints are highly reliable, economical ball joints that can be used in a variety of medium to heavy duty applications. Common Applications: Lawn and garden equipment, construction, and industrial equipment • Consistent pull ...
Cablecraft Motion Control
This model is a non-separable type of bearing system whose inner ring is fixed to the side plates. Since the circumference of the outer ring is spherically ground, it helps lighten a biased load (symbol R). (Model number of the type ...
THK
Outer diameter: 48, 52 mm
Inside diameter: 8.2, 6.5 mm
Load capacity: 40 N - 250 N
The series 2130 is for universal use. It can, for example, be used as a side guide roller, and is suitable for conveying lightweight and medium materials. For medium-duty materials The series 2160 is for universal use. The series ...
Interroll
Standards: DIN 71802 Form: CS Material: Steel Surface: Zinc plated Design: With circlip Thread type: Metric thread RoHS-compliant: Yes Ball joint with wrench flat and hex. nut
SKF cam followers (stud-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. They are based on either needle (fig. 1) or cylindrical (fig. 2) roller bearings. Instead of an ...
SKF
Outer diameter: 125 mm - 400 mm
Load capacity: 5,000 kgf - 30,000 kgf
The SR wheel block programme is used in crane, trolley and systems building as well as in custom applications and special constructions. The SR wheel block comes in six different sizes for wheel loads from 5,000 kg to 30,000 kg. Thanks ...
Pitch Diameter - 0.8 mm Mounting Hole to End Length - 17.5 mm To Fit Gas Strut Diameter Range - 6.0 - 15.0 mm Type - 1 Full Material - Nylon Colour - Black Commodity Code - 3926909790
Used in aircraft components, such as wing flaps, engine and wing mounts and hatches, rod-end and spherical bearings function as joints. These bearings are also used extensively in helicopters, trains and automobiles.
• High load capacity: GKS heavy-duty castors are robustly designed to withstand extreme weights, making them ideal for transporting heavy machinery and equipment. • Soil protection: Depending on the type, the rollers are designed so ...
GKS-PERFEKT
Rod End Bearings, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), are a mechanical articulating joint. Rod End Bearings are used on the ends of cylinders, linkages, rods, and shafts to take up misalignment ...
Outer diameter: 26 mm - 290 mm
Excellent for precision handling of heavy loads in tough environments Combine the high capacity of Load Runners idler-rollers with high-strength steel Load Rails, cut to length and drilled to customer requests. Every piece is designed ...
Rod Ends are forged and finished for applications not requiring flat contact with the head. All holes are reamed. Rod Ends can be used with spherical flange assemblies, flange nuts and clamp assemblies. Material:Alloy Steel and 303 Stainless ...
Jergens, Inc.
Please specify:
Help us improve:
remaining