- Electricity - Electronics >
- Cable, Connector, Enclosure >
- Cable accessories (insulation, connectors, etc.)
Cable accessories (insulation, connectors, etc.)
Canare 75 ohm Mobile Coaxial Cables: great flexibility for mobile applications. • Specially designed for mobile applications. • Flexible and low loss structure. • High-density double braided shield. L-5.5CUHWS • Specially designed ...
CANARE Electric
Canare 75 ohm Super Low Loss Coaxial Cable ・Best suited to 3G-SDI/HD-SDI transmission. ・Highly-foamed PE insulation allows further improvement in the attenuation characteristics. ・Multi-layer insulation in which to each layer is given ...
CANARE Electric
Canare 75 ohm Ultra Low Loss Coaxial Cables. Best suited to 12G-SDI transmission. • Specially designed for 12G-SDI • The max. transmission distance of 4K UHD over L-5.5CUHD single link able to reach 100 m or longer (Depending on receiving ...
CANARE Electric
Temperature: -50 °C - 200 °C
Length: 1,500, 1,000 mm
High Temperature Low Outgassing -This is a cable with insulation ceramic beads that can be used in a vacuum environment. -It is also ideal for thermocouple applications.
Nominal voltage: 10 kV
• Special cable for voltages up to 12,500 V and currents up to 40 A • Available in different versions - see table below • Minimum purchase / order unit 10 m If voltages above 230 V are used, appropriate components are ...
Nominal voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C
Cross-section: 0.75 mm²
Material (Housing) - TPU Sealing Material - Silicone Protection Class - IP68 /IP69 Temperature Range Connector - -40 °C…+85 °C Electrical Data Operating Current per Contact (max.) - max. 8 A Cable Data Cable No. - 514 Material ...
Y-splitter for using both signals of the 4-pin DT ports with separate connection cables. Works with all our xtreme bus modules. Mechanical Data Material (Housing) - TPU Sealing Material - Silicone Protection Class - IP68 /IP69K Electrical ...
M8x1/M12x1 Duo-Splitter Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either connected directly to the ...
M8x1/M12x1 Y-Splitter Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either connected directly to the superordinate ...
Junction system agricultural technology type S, M, L Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either ...
Nominal voltage: 10 V - 30 V
Temperature: -40 °C - 80 °C
Cross-section: 0.75, 1.11 mm²
The power connector used is 7/8 "standard connector, which is designed to provide power for SENTINEL bus module products, and is divided into male type and female type.
Cross-section: 0.32 mm²
Length: 5, 10, 2 m
SENTINEL- communication connector, which is specially used for Ethernet communication. The cable conforms to ISO/IEC 1180 (Cat.5) and TIA/EIA-568-C.2 (Cat.5e) standards. RJ45 and M12 D codes are available for connectors.
Cross-section: 1.5 mm²
Cable: H05RNH2-F 2x1.5 mm² Packing: Ring in a polybag or on drums
We manufacture charging cables with plug and coupling type 2 mode 3 in the variants: 1 phase / 20A 3 phases / 20A 1 phase / 32A 3 phases / 32A Lengths from stock: 4, 6, and 8 meters, other lengths and special assemblies on request
Frequency Range - 700MHz - 6GHz Isertion Loss - ≤ 15 dB VSWR IN - ≤ 1.60:1 VSWR OUT - ≤ 1.50:1 Amp. Balance - ± 0.8 dB Isolation - ≥ 6 dB Impedance - 50 Ω Power Handling - 2 Watt Connectors - SMA (f) Design - USB-Desktop External ...
Aaronia AG
Frequency Range - 400MHz - 8GHz Isertion Loss - ≤ 18 dB VSWR IN - ≤ 1.60:1 VSWR OUT - ≤ 1.50:1 Amp. Balance - ± 0.8 dB Isolation - ≥ 6 dB Impedance - 50 Ω Power Handling - 2 Watt Connectors - SMA (f) Design - USB-Desktop External ...
Aaronia AG
Frequency Range - True DC - 8GHz Isertion Loss - ≤ 20 dB VSWR IN - ≤ 2:1 VSWR OUT - ≤ 1.50:1 Amp. Balance - ± 0.8 dB Isolation - ≥ 6 dB Impedance - 50 Ω Power Handling - 2 Watt Connectors - SMA (f) Design - USB-Desktop External ...
Aaronia AG
Nominal voltage: 300 V - 1,000 V
Temperature: -40 °C - 90 °C
Cross-section: 1.5 mm² - 240 mm²
IC AUTOMATION
IC AUTOMATION
Nominal voltage: 600, 1,000 V
Temperature: -40 °C - 80 °C
Cross-section: 0.38 mm² - 95 mm²
IC AUTOMATION
Brand:XINGO brand or Neutral packing or ODM or OEM Type: cable tie mounts Material: UL approved Nylon 66, UL 94V-2. Work temp: -25°C to 85°C. Feature:acid proof, corrosion resistant, good insulation,not easy ageing. Color: Stock in ...
DEMOELE / Wenzhou Duanmeng Electric Co.,Ltd
Diameter: 8 mm - 25 mm
Material: UL approved Nylon 66, UL 94V-2. Usage: Put cable in and stick on board,this clamp can adjust the bundle range. Color: Stock in natural and black; (other color available upon request). More information welcome to visit our website.
DEMOELE / Wenzhou Duanmeng Electric Co.,Ltd
Material: UL approved Nylon 66, UL 94V-2. Usage: Put wire in and twist Color: Stock in natural; (other color available upon request). More information pls visit our website.
DEMOELE / Wenzhou Duanmeng Electric Co.,Ltd
Temperature: -40 °C - 70 °C
Length: 25 cm
The modular 1-Wire interface cable makes the physical bridge to the modular 1-Wire network. The modular network can easily be customized with the use of standard RJ-45 splitters and combiners to achieve the needed 1-Wire network. Multiple ...
LOGICIO
Metal Cable Tie Mounts Our Metal Cable Tie Mounts (otherwise known as Stainless Steel Cable Tie Bases, Metal Cable Tie Bases, Screw Mounted Cable Tie Bases) are manufactured from a316 Stainless Steel and are used to create a mounting ...
Vital Parts ltd
Our Self Adhesive Cable Tie Mounts (otherwise known as a Cable Tie Adhesive Base, Cable Tie Mounting Base or Cable Tie Platform) have strong self adhesive on the bottom of the mounting plate to provide a strong adhesive fixing to different ...
Vital Parts ltd
Our Open/Closed Bushes or 'Split Cable Bushings' are a popular product manufactured from a UL94V-2 rated Nylon 6/6 which guarantees a level of flammability. As you may have guessed from the name, these Snap Fit Bushes feature a 'split' ...
Vital Parts ltd
Easily to carry thanks to its handle (H=11cm) and its low weight (1.25kg), this measure device enable you to measure your cable, hose, rope... Until Ø 22mm Furnished with a decimeter counter. Measure until 9999,9 meters Width Measuring ...
CABLE EQUIPEMENTS
Measuring device + guillotine shears - For a maximum diameter of 15 mm - Dm counter measuring up to 9,999.9 meters - 200 mm development measuring wheel made of striated metal - Dimensions (OD-T): 300 x 300 x H 430 mm - Weight (OD-T): ...
CABLE EQUIPEMENTS
Counter in dm measuring up to 9999.9 metres. Measuring wheel width: 25 mm development: 200 mm made of striated metal. Dimensions and weight (M3-T): l 130 x w 250 x h 140 mm 1.9 kg
CABLE EQUIPEMENTS
Standard type set collar. It is attached to the shaft by the set screws. Chamfer on one side end face is larger (bore diameter 8 mm or above). This avoids interference of the set collar with the external wheel when the bearing is fixed.
NBK (Nabeya Bi-tech Kaisha)
Standard type set collar. It is attached to the shaft by the set screws. Chamfer on one side end face is larger (bore diameter 8 mm or above). This avoids interference of the set collar with the external wheel when the bearing is fixed.
NBK (Nabeya Bi-tech Kaisha)
Standard type set collar. It is attached to the shaft by the set screws. Chamfer on one side end face is larger (bore diameter 8 mm or above). This avoids interference of the set collar with the external wheel when the bearing is fixed.
NBK (Nabeya Bi-tech Kaisha)
Track your products throughout the value chain. Indispensable for inventory management and optimization, barcodes are also a means of conveying traceability data. Whether 1D or 2D, each code is unique and linked to a product or packaging. ...
Arm equipped with a guide and mounted on the measurer tray, in order to bring the cable closer to the nearest coil, to achieve a perfect winding. Features • Guide rollers for max. cable diameter 20 mm • Extensible 40 mm • Rotary ...
LOIMEX
Arm equipped with a guide and mounted on the measurer tray, in order to bring the cable closer to the nearest coil, to achieve a perfect winding. Features • Guide rollers for max. cable diameter 40 mm • Extensible 40 mm • Rotary ...
LOIMEX
Arm equipped with a guide and mounted on the measurer tray, in order to bring the cable closer to the nearest coil, to achieve a perfect winding. Features • Guide rollers for max. cable diameter 40 mm • Extensible 110 mm • Rotary ...
LOIMEX
Hose diameter: 75 mm - 406 mm
Width: 9 mm
FEATURES 430 SS band and housing, RoHS compliant zinc plated screw. Tilting housing worm-drive clamps guarantee versatile and quick application especially on large diameter hoses. The toothed band and bevelled edges protect the hose ...
Cross-section: 50, 35, 95, 70 mm²
Length: 50, 30 m
Braided copper cable Braided bare electrolytic copper cable. Among its many applications as a conductive element, it is used to build capture meshes, down conductor connections in lightning protection systems and for building grounding ...
INGESCO
Galvanized steel round conductor Principally indicated for capture mesh conductors and down conductor connections in lightning protection systems. Characteristics • Economical. • 125m & Ø8mm Coils (Other dimensions on request).
INGESCO
POLYAMIDE CLAMPS • Wall mounting lag screw. • Cable attachment by clip. • Clamp equipped with M8 thread. • Available with M6 lag screw (Ref. 118117). Characteristics • Quick and secure attachment of the cable. • Durable and ...
INGESCO
Hose diameter: 2.4 mm - 1,040 mm
nylon clamps Technical details SKU info - NYLON CABLE TIE 2,4 - 80 WHITE Box quantity - 100
VIPA spa
Hose diameter: 2.4 mm - 1,040 mm
nylon clamps SKU info - NYLON CABLE TIE 2,4 - 80 BLACK Box quantity - 100
VIPA spa
Hose diameter: 16 mm - 130 mm
DIN 3017 Screw hose clamps L 9mm constant tension Technical details DIN - 3017
VIPA spa
Tubing clamps • stainless steel • band width 10 mm • colour may vary
Diameter cables: 1 mm - 5 mm
Precision: 1 %
Maximum cutting length: 0 cm - 9,999 cm
WI-M1 is a meter designed and manufactured by us to facilitate the measurement of your cables directly at the workstation. A four-step simple operation: Step 1: Insert the wire manually Step 2 : Push-To-Catch unique technology ...
- The cable ties gun fits to a range of ties width. And each cable tie gun has a cutting tool which allows a perfect finish.
MATERIAL NYLON 6.6 COLOR NATURAL, BLACK NOTE Operating temperature (°C): -40 up to +85 Flammability class: UL 94 V2
PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...
PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...
Width: 12.7, 14 mm
Stainless steel clamps inside is smooth, no burr, no damage to the connected pipes or hoses. Product Part Number Width Thickness ID mm mm mm Stainless steel clamps BST-KG-12B 12.7 0.65 min 8 BST-KG-12H 12.7 1 min 8 BST-KG-14B 14 0.65 min ...
Interconnection kit L=1,5m between junction box / telemetry receiver / PTZ / camera housing, including power supply cable, data cable, coaxial and I/O cables if required. Protected inside a flexible galvanized steel wire braided. The ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining