Primary current: 4 A
Voltage: 10 V - 30 V
Operating temperature: -25 °C - 90 °C
Straight in d.c. • Moulded with cable • According to EN 60947-5-2 • General Features: Female connectors of this section can be matched to the proximity sensors as indicated on the ordering references tables of the products. They ...
Prefabricated yard goods You tell us the length, fiber and desired connector and we will manufacture the appropriate cable for you in the shortest possible time. 2-48 fibers (higher number of fibers possible on request) Standard production: ...
Patch cable Description: • category 6 Patch Cables • shielding: U/FTP shielded • 4 pairs, twisted • cable thickness: AWG36 100 % copper • coat: PVC, LSOH on request • standard colors: Grey, red, blue, ...
Our DATAEAGLE 4000 product line – Wireless Ethernet – is the solution for setting up wireless, flexible and powerful industrial networks! The 4000 series is suitable for the transmission of Ethernet protocols (e.g. Modbus TCP) and is ...
Schildknecht AG
Unipolar cable for connecting electrodes to A,B,M,N reels in quadrupole surveys, equipped with stainless steel spring plug connector and PVC protective cap to ensure best connection between electrode and cable and to protect connector ...
Meets the ISO & EN Channel CAT 6 specifications. Performance tested up to 250 MHz, including performance characteristics such as paraphony (NEXT). Equipped with a molded bead protection with cable clamp, gasket with protection of the ...
LabManager® can be expanded by using sub-stations in order to increase the number of racks or to distribute the inputs/outputs across various positions of an installation or racks. Various bus coupling units are available for this ...
HiTec Zang GmbH
LabManager® can be expanded by using sub-stations in order to increase the number of racks or to distribute the inputs/outputs across various positions of an installation or racks. Various bus coupling units are available for this ...
HiTec Zang GmbH
LabManager® can be expanded by using sub-stations in order to increase the number of racks or to distribute the inputs/outputs across various positions of an installation or racks. Various bus coupling units are available for this ...
HiTec Zang GmbH
• Simple operation • Reverse polarity protection Electrical properties Output signal type Voltage Input type IEPE (Piezotron) Dynamical properties Maximum signal frequency 87 kHz Time constant Short Operation and installation Device ...
Kistler
• AC power supply or any DC voltage source • Sensor bias voltage display • Sensor and cable circuit integrity indication via LEDs (ok, short circuit, interruption) Electrical properties Output signal type Voltage Input type IEPE ...
Kistler
• AC power supply or any DC voltage source • Bias voltage indicator via LEDs (ok, short circuit, interruption) • Switchable gain and high-pass filters, plug-in type low-pass filters Electrical properties Output signal type Voltage Input ...
Kistler
The MR611 sensor fiber is a completely assembled measuring fiber for the MR610 multipoint temperature system. This measuring fiber can be used without further modification and already contains a connecting fiber and a sump.
MICRONOR
The transparent PROFIBUS PA link/coupler enables seamless high speed integration to PROFIBUS PA. It powers the attached PA devices and fully emulates them as DP devices on the backplane. Adjusted busparameters are not required and therefore ...
very compact triaxial fibre coupler stage NA of 0.4 for FC connector Miniature monomode coupler with piezo electric inertial motor. FC 0.4
mechOnics ag
for SMA connector with NA of 0.4 compact triaxial fibre coupler stage Miniature monomode coupler with piezo electric inertial motor. SMA 0.4
mechOnics ag
for FC connector with NA of 0.38 compact triaxial fibre coupler stage Miniature monomode coupler with piezo electric inertial motor. FC 0.38
mechOnics ag
Optical Fiber Coupler 1×2 (2×2) SMC is manufactured with the SMF and strong FBT process not only can split the input light into two same beams but also can be prefabricated with any coupling ratio according to requirements.The product ...
Operating temperature: -70 °C - 400 °C
DJB Part Number: 7P Description: 2 pole plug with 7/16 UNS thread, widely used in the Aerospace and Power industry. This plug can be fitted to twin core low noise Softline cable (T23) or to any of our stainless steel hard line cables ...
DJB Instruments UK Ltd
Operating temperature: -70 °C - 400 °C
DJB Part Number: 7S Description: 2 pole socket with 7/16 UNS thread, widely used in the Aerospace and Power industry. This plug can be fitted to twin core low noise Softline cable (T23) or to any of our stainless steel hard line cables (HL15, ...
DJB Instruments UK Ltd
Impedance: 50 Ohm
Operating temperature: -65 °C - 165 °C
DJB Part Number: BC1 Description: BNC Plug, supplied complete with rubber boot, for use on cables up to 2mm diameter Coupling Method: Bayonet Insulation Resistance: 5000MΩ Material List: Body: Brass – nickel plated Contact Pin: ...
DJB Instruments UK Ltd
SIMPLE STEEL JOINT MaterialGalvanized Steel Weight235 g Item2
Legrand
Type B2 measuring shunts are intended for extending the measuring ranges of direct current of magnetoelectric ammeters, wattmeters and meters of 0.5 classes; 1; 1.5; 2.5. -voltage drops 60mV, -accuracy class: 0.2 ...
LUMEL
• Saf-D-Grid® 400 Ultra-Short Receptacle Contacts for 10-12 AWG wire. • First Mate, Last Break ground contact provides the safety of an earthing path before engagement of the power contacts. • The connectors are rated for current interruption ...
Anderson Power Products
For specialty single-mode, multimode, multicore, or polarization maintaining fibers Reliable, demountable connection for ease of fiber use Choice of Generic or Premium for optimum PM fiber performance Typical applications: Fiber laser ...
23 AWG/0.6 mm with RJ-45 (page 15.39) Non-bonded-pair, solid conductors 250 MHz bandwidth 6 colors: blue, white, grey, green, red, yellow 10 standard lengths: 0.5, 1, 2, 3, 5, 6, 15, 20, 30, 45 m Available ...
Belden Electronics GmbH Standort Neckartenzlingen
This fieldbus coupler connects the WAGO I/O System 750 to PROFINET IO (open, real-time Industrial ETHERNET automation standard). The coupler identifies the connected I/O modules and creates local process images for maximum two I/O ...
Brought to you by RS Pro, a range of Cat5e cables, perfect for network connections within the home, office spaces or any area requiring a reliable and high performing internet connection. Ethernet cables come in various shapes and sizes, ...
Category Contacts Series TC 200 Type of contact Crimp contact Gender Male Manufacturing process Turned contacts Conductor cross-section 16 mm² Rated current ≤ 200 A Contact resistance ≤ 0.3 mΩ Stripping length 18.5 ...
HARTING
Bus coupler for Sercos + extended functionality Compact, modular and simple Space-saving I/O technology for top hat rail mounting Individually combinable modules Innovative assembly and installation concept
Primary current: 15, 10 A
Voltage: 250 V
Operating temperature: -25 °C - 120 °C
• Cord Connectors (Rewireable): Screw • Connector, Pin temperature 120 °C, Protection class I • Wire size 0.75-1.5mm², 18AWG-14AWG (0.82-2.08mm²) • Cable diameter 6.0-10.0mm • Protection cover as accessory for IP67 / IP69K unplugged • ...
Weidmüller u-remote – our innovative remote I/O concept with IP 20 which focuses purely on user benefits: tailored planning, faster installation, safer start-up, no more downtime. For considerably improved performance and greater productivity. Reduce ...
Open top THT socket solution suitable for BGA packages with 0.50 mm pitch 2-point Tweezer Style contact system to nip the sides of solder balls to prevent damages of co-planarity of solder balls Open Top solution suitable for autoloading Compact ...
Yamaichi Electronics
Please specify:
Help us improve:
remaining