Construction equipment buckets, Shears, Grabs

Stone/element height: 50 mm - 160 mm
Working load limit: 400 kg

The new HVZ-UNI-II is more universal in use, more robust in design and more easy to adjust this device incorporates the experience of 2 decades in mechanical installation. It can be used in conjunction with the laying machine VM-301/401/203/204 ...

Load: 6,000 kg
Jaw opening: 150 mm - 210 mm

Concrete Highway Divider Clamp BSZ-KH With this mechanical grab barrier walls can be gripped absolutely safe without leaving any marks on the concrete elements. Even densly stacked asymetrically elements can be lifted and installed ...

Load: 100, 300 kg
Jaw opening: 500 mm - 1,045 mm

Especially suitable for handling concrete kerb stones. The corresponding attachment set is required for attachment of the respective hydraulically powered vacuum device: (vacuum attachment not included) Further information • The ...

Working width: 2,000, 2,200 mm

Forestry mulchers on tractors with fixed hammers are designed to perform all types of work. Adaptable to a tractor with 80 to 300 HP, the forest shredder XYLOR T is the essential equipment for intensive clearing work in a forest environment. For ...

Working width: 1,800, 2,000, 2,200 mm

Ideal for intensive vegetation cutting, maintenance of forest edges and rural areas with your tractor... Adaptable to the front as well as the rear of tractors with 80 to 125 HP, the XYLOR T forest shredders are ideal for maintaining ...

Working width: 1,000, 1,200, 1,400 mm

Forestry mulching heads on fixed hammer shovels for all types of maintenance work up to 25 cm in diameter. A range of forestry shredders to fit on larger excavators, from 15 to 20 tonnes. Fitted with a rotor with fixed hammers, these ...

This type of Mechanical grab is for two rope operated cranes ,One Holding Rope and One closing Rope. The grabs are specially designed for charging and discharging sand, gravel and other bulk materials. The grabs can be executed with ...

Carrier weight: 10 t - 40 t
Volume: 3, 5, 4, 10 m³

Electric Hydraulic Grab is designed for waste incineration power generation, waste steel waste battery treatment, etc. Constant power+load sensitive+pressure cutting hydraulic system. High quality components with good sealing, low ...

Carrier weight: 3 t - 63 t
Volume: 60 m³

Crane grab main technical parameter: 1.Rated load capacity: 3.2t~63.0t 2.Grab volume:0.2m3t~60m3 Crane grab application: According on the material type and customer requirement to design grab with teeth, parallel girder ...

The predrill bit accessory is suitable for predrilling in hard, compact soil as well as for vibro-drilling concrete piles.

Vortex augers for excavators and front attachments are highly versatile as they can be equipped with different types of bits and extensions to work on various types of soil. Malaguti augers are ideal for drilling soil and breaking up ...

Carrier weight: 1,600 kg - 12,000 kg
Bucket width: 900 mm - 1,900 mm
Capacity: 300 l - 650 l

Screening Bucket The Screening Bucket is a special type of bucket that is designed to efficiently sort material or to separate components based on size or type, such as separating gravel from sand, stones from soil, and so on. Benefits - ...

Working width: 1,650 mm - 2,000 mm

Mulcher The Mulcher is a single purpose machine for high performance grass cutting as well as mulching plants including grass, shrubs and smaller trees. Its special cutting blades crush the plants into small mulch material that can ...

Carrier weight: 1,600 kg - 14,000 kg
Bucket width: 1,340 mm - 2,020 mm
Capacity: 200 l - 1,000 l

Concrete mixing bucket The Concrete Mixing Bucket is an attachment designed for a fast and efficient production of high-quality concrete even in adverse terrain conditions. The mixing auger of the bucket rotates around its axis thus ...

Adjustable steel blades to push scrap for industrial brooms models: Industrial Classic, Industrial Large and Industrial Extralarge.

Adjustable steel blades to push scrap for industrial brooms models: Universal Classic and Universal Large.

Adjustable steel blades to push scrap for Eco Strong Classic, Large and Extralarge models.

Fixed Column cantilever jib crane is reasonable and safe in operation. It has wide 360 degree operation scope which is suitable for machining workshop, assembling workshop, foundry, heat treatment plant, transportation, loading and unloading, ...

Carrier weight: 5 t - 64 t

Single RopeDouble Petal Crane Grab can be divided into clamshell grab and orange peel grab. The former consists of two complete buckets,and the latter is made up of three or more jaws. The clamshell grab bucket also have the following ...

Electric hydraulic grab bucket Suitable for waste incineration power generation, scrap steel and batteries treatment, etc. Constant power+load sensitivity+pressure cutoff hydraulic system. Imported branded components with good sealing, ...

Load: 125 kg - 2,000 kg
Span: 7 m
Lift height: 3,000 mm

Jib Crane bases are mounted with the anchoring materials to factory floor. Lifting capacity , the lenght of the jib and the height of pillar can be adjusted according to customer's requirement. Jib lenght can be done up to 7 mt. within ...

Load: 125 kg - 1,000 kg
Boom length: 2,000 mm - 7,000 mm

Jib Crane wall/column mounted with the anchoring materials to factory floor. Lifting capacity , the lenght of the jib and the height of pillar can be adjusted according to customer's requirement. Jib lenght can be done up to 7 mt. within ...

Load: 125 kg - 2,000 kg
Lift height: 3,000 mm - 4,100 mm
Boom length: 3,000 mm - 8,000 mm

Jib Crane bases are mounted with the anchoring materials to factory floor. Lifting capacity , the lenght of the jib and the height of pillar can be adjusted according to customer's requirement. Jib lenght can be done up to 8 mt. within ...

Load: 100 kg
Jaw opening: 80 mm - 370 mm

The offered tool is designed for professional transportation of curbs and precise pavement laying, making it an indispensable solution on construction sites and wherever efficiency and speed of work are prioritized. Technical Specifications: ...

Load: 120 kg
Jaw opening: 150 mm - 1,020 mm

ange: 150-1020 mm | Painted | Lift Capacity: 120 kg Introducing our versatile and durable tool, designed to handle a wide range of applications with ease. With an adjustable range of 150-1020 mm, this tool offers exceptional flexibility ...

Load: 120 kg
Jaw opening: 485 mm - 1,020 mm

Specifications: no: 10004 Galvanized Range 485-1020mm Lift capacity 300 kg

Load: 500 kg - 5,000 kg
Span: 3 m - 12 m
Lift height: 4 m - 12 m

CMAK manufactures in-house designed jib cranes that are applicable to wide variety of industries. The main product types • Floor-mounted turning angle jib cranes • Console (Wall running) jib cranes • Wall-mounted turning angle jib ...

Bucket weight: 14 kg

For M90 - M100 - M100SE Measures: see images CHARACTERISTICS CHARACTERISTIC - UNITS METRIC Width - 200.0 mm Weight - 14 kg

Bucket weight: 13 kg

BUCKET 20cm For DRS-1000 Measures: see images CHARACTERISTICS CHARACTERISTIC - UNITS METRIC Width - 200.0 mm Weight - 13 kg

Bucket width: 300 mm
Bucket weight: 16 kg

For DK950/M6000 Measures: see images CHARACTERISTICS CHARACTERISTIC - UNITS METRIC Width - 300.0 mm Weight - 16 kg

The AV range was created to address the most extreme working conditions in the field of outdoor space maintenance, these vehicles represent the excellence of the technique for green and snow management work. These two models are available ...

Equipment for handling mud, polluting sludge, etc... indicated for underwater excavations in difficult areas such as quarry, river, sea, etc.. Constructed with Hardox steel to ensure strength, long life and moderate weight. The operation ...

Hydraulic clamshell grabs are the best solution for loose material and can be used on all lifting equipment or crawler cranes.

Hydraulic clamshell grabs are the best solution for loose material and can be used on all lifting equipment or crawler cranes.

Promove’s sorting grabs are the perfect solution for handling different types of material and for small demolition jobs. SG line main features are: compact design, low weight and continuous 360° hydraulic rotation. Equipment Weight ...

Promove’s sorting grabs are the perfect solution for handling different types of material and for small demolition jobs. SG line main features are: compact design, low weight and continuous 360° hydraulic rotation. Equipment Weight ...

Promove’s sorting grabs are the perfect solution for handling different types of material and for small demolition jobs. SG line main features are: compact design, low weight and continuous 360° hydraulic rotation Grab Weight 265 Kg Pressure ...

The 1061 series is manufactured by Eichinger, and is a manhole ring clamp that is ideal for use in lifting, and placing manhole rings in its specified location. The clamping range of the unit can be altered via a screw, and there is a ...

A very strongly build lifting clamp with a manhole ring grab. It is torsionally rigid and made of light-weight sheet steel. The clamp can be successfully used in the transportation and placement of upright pipes and conical shaft rings. ...

Torsionally rigid, light-weight sheet steel construction for the transportation and placement of upright pipes and cones. The shaft ring clamps have been designed in conformance with official labour safety regulations and are equipped ...

Gensco offers mini mobile specialty attachments for concrete crushing, scrap and demolition processing. Designed with small hydraulic machines in mind. Suitible for concrete crushing, scrap and demolition applications, cutting and lifting ...

Carrier weight: 1,900 lb - 6,450 lb

Gensco DS grapples are extremely versatile and can be used for a wide variety of material. Grapples are designed for waste handling, refuse, loose material, ferrous & non ferrous metals, auto salvage & more. No hydraulics necessary! ...

Carrier weight: 650 lb - 1,500 lb

Hydraulic, cable and electric styles suitable for attaching to any model excavator, loader or crane. For all ferrous, non-ferrous and solid waste applications Gensco is all about attachment durability. Our Grapples are recognized as ...

Output: 150 kg/h - 200,000 kg/h

The POITTEMILL pendulum roller mill is a vertical mill that works by compressing the material bed. The pendulums mounted on a star wheel are driven by a vertical shaft. Each pendulum is fitted with a grinding roller that rotates upon ...

Output: 5 t/h - 500 t/h

DESCRIPTION The Cylinder mill, commonly known as the Roller Press works by crushing the material between two cylinders kept under pressure by a hydraulic system (2 to 10 T/linear cm). This mill uses a patented process of pulsating ...

Motor power: 1.5 kW - 45 kW
Machine weight: 1,200 kg - 11,000 kg

Fluted smooth teeth : Mineral processing : Limestone Gypsum, Lime, Chalk, Cement, etc. Fuel processing : Coal, petroleum coke, etc. Coal, petroleum coke, etc. : Cullet, glass, concrete, bottom ash, etc. Chemical ...

Carrier weight: 1 t - 2 t
Volume: 22 l

The efficient and powerful Demolition Grab from DMS Technologie shows its strength above all in deconstructive work such as the removal of masonry or the dismantling of wooden structures, but can be used as an all-rounder for many other ...

Carrier weight: 2 t - 4 t
Volume: 55 l
Grab mass: 119 kg

The efficient and powerful Demolition Grab from DMS Technologie shows its strength above all in deconstructive work such as the removal of masonry or the dismantling of wooden structures, but can be used as an all-rounder for many other ...

Carrier weight: 2 t - 4 t
Volume: 76 l
Grab mass: 199 kg

The efficient and powerful Demolition Grab from DMS Technologie shows its strength above all in deconstructive work such as the removal of masonry or the dismantling of wooden structures, but can be used as an all-rounder for many other ...