Other filters and accessories

» Available with: transparent PA12 bowl or nickel-plated brass bowl for the small version (N1) Series N lubricators are available with G1/4 and G1/8 ports. The special type of design allows a vast range of applications in relation ...

» Regulation screw » Ability to refill the oil even with system under pressure » High flow » Check of the oil level through plastic cover openings » Bowl locking system reducing the risk of accidents » ...

The activated carbon filters from Camozzi with its modular construction and compact construction are ideal for removing impurities and contaminants. The filters with various ports, from the MX2 types G3/8, G1/2, G3/4 to the MX3 types ...

The Super Duty series has one of the best flow rates in the industry. This sturdy product also boasts extremely low leak rates. The design is fully modular. It also offers a complete set of accessories. Locking bowls are installed as ...

Ingersoll Rand 3000 Series lubricators, 3/4" & 1", give high flow and low leakage rates, and feature an all-modular design with locking bowls for safety with 2 years warranty.

The 2000 series of lubricators from Ingersoll Rand features an industry leading flow rate, low leak rates and a complete modular design. It offers an accessory set over the full line of products. Its high-quality is reinforced by a 2 year warranty.

Impart ample lubrication to downstream actuators and valves with the help of reasonably priced direct-flow lubricators. The bowl is made up of Polycarbonate material with steel shield. There is also a glass panel over the metallic bowl ...

Excelon Plus design allows in-line or modular installation Micro-fog lubricaton for best lubrication in general purpose pneumatic applications, fine mist perfect for long and more complex pipework Flow sensor provides a ...

Excelon Plus design allows in-line or modular installation Micro-fog lubricaton for best lubrication in general purpose pneumatic applications, fine mist perfect for long and more complex pipework Flow sensor provides a ...

Excelon Plus design allows in-line or modular installation Micro-fog lubricaton for best lubrication in general purpose pneumatic applications, fine mist perfect for long and more complex pipework Flow sensor provides a ...

The pneumatic lubricator is the simplest wav of efficiently lubricating tfie octuators linked to a circuit. As compressed air flows towards the lubricator, it encounters a flexible diaphragm which partially blocks the way, creating a ...

The pneumatic lubricator is the simplest way of properly lubricating actuators connected to a circuit. As air flows from the mains through the lubricator, it encounters the diaphragm which obstruct the flow and the air is forced through ...

Mini-lubricator with high lubrication stability. • Quantity of lubricant proportioned to air flow • Activates at low flow rates • Micrometric regulation of lubricant flow • All-round oil level viewing EAN code: ...

The AF series, which are manufactured by Rami Yokotoba, is a lubricator suitable to use in accurate lubrication of machine parts. It is easy to use, and has accurate adjustments. Lubrication already occurs with a slight pressure drop. ...

Airwork's Standard Lubricator features a total pressure rate of 15 bar. This lubricator's operating temperature levels range from -10 to 50 degrees Celsius. It also features a bowl capacity of 28 cm3, and a 6bar flow rating with ∆p 1bar of 700Nl/min.

The XL1 Series, manufactured by Air Work, is a filter regulator that is suitable for packaging sealers, boxers, coders, wrapping, palletizers and filling equipment. This incorporates a 15 bar pressure rate, M4X14/M5X18/M6X20 wall clamping ...

Fluid Air Maximum pressure 18 bar Temperature 20° C / +50°C Type of lubrication Oil mist Bowl capacity 1/8 - 1/4 = 50 cm3 3/8 - 1/2 = 150 cm3 3/4 - 1" = 400 cm3 Wall clamping screws 1/8 - 1/4 = M4x40 ...

The small dimensions of the gas-tight air heater enables space-saving installation. If one or several heaters are connected to the compressed air network, you will receive an air flow with high air speeds. The temperature can be controlled ...

The AE16SS all stainless steel air eliminator removes air from HVAC systems and are also suitable for non corrosive and/or dangerous liquids compatible with the construction, providing that their specific weight is no less than 0,75 kg/dm³. This ...

The AE30SS all stainless steel sealed body air eliminator removes air from hot and superheated water systems and is also suitable for all liquids compatible with the construction, providing that their specific weight is not less than ...

The AE39.2 range of high capacity automatic vents are designed to remove air or gases from water and other liquid systems, without requiring any external source of energy. They are capable of handling high loads during start-up while ...

Flow: 150 m³/min
Weight: 2.9, 3.1 kg

BEKOMAT® Condensate Drain for Air Compressors Efficient Compressed Air Treatment with the BEKO condensate drain BEKOMAT® - BEKO Technologies At almost all stations in the compressed air treatment process, condensate is generated. It ...

Flow: 4 m³/min - 40 m³/min
Weight: 0.7 kg

BEKOMAT® 20 | 20FM for Filters and water separators The BEKOMAT 20 is a strong condensate drain designed for use in water separators and air filters. It is suitable for oil-lubricated plants as well as oil-free compressors. The control ...

Design philosophy: Equipment performance optimization, good operability, energy saving and environmental protection, overall beautiful. Component: The equipment is made up with tank, defoamer,condenser, cooler, oil-water separator, ...

DMF technology (Multi-Phase Decanter) has given rise to LEOPARD, the technological solution of the third era for olive oil extraction. LEOPARD is the only two-phase centrifugal extractor that produces a dehydrated pomace similar to the ...

• Many sizes available • Long lasting stainless steel construction • Effective and rapid cleaning with electric cables and vacuum pipes connected Multi-purpose three-phase receiver series for granules with capacity from 2 to 200 ...

Flow: 200, 500, 300 l/min
Length: 165, 199, 278 mm
Width: 53, 70, 90 mm

・Remove water droplets from the air by simply installing it in vacuum equipment connection lines. ・Effective for removing water droplets from the air sucked into vacuumpumps, ejectors, etc.

Eaton Float Drain Traps efficiently handle the liquids in the storage tanks and drip points of separators without pressure loss in the line. These traps are capable of removing up to 2800 pounds of condensate per hour and work with pressure ...

Power: 400 W - 800 W
Temperature: 600 °C - 750 °C
Pressure: 200,000 Pa

• Compact air heater • Suitable for precise process heat applications • Available with 400 W or 800 W heating output • Integrated thermal switch for device protection LE MINI is a very small air heater with a heating tube diameter ...

The MGAL series pneumatic fine oil mist lubricators can be installed in-line or directly to other FRL equipment using available modular connecting kits. Port sizes range from 1/8" NPT to 1" NPT. 200, 300, and 400 series are ...

The Global FRL Lubricators are available in (3) sizes: Miniature (P31L), Compact (P32L) and Standard (P33L). These lubricators can be precisely adjusted to a very low oil flow rate because only a portion of the oil drops seen in the ...

International Compressed Air Lubricator Description The IL1M Monnier international compressed air lubricator injectsoil at a controlled rate into compressed air for the lubrication ofpneumatic equipment Principal features: - ...

The 04L is a mist lubricator that injects a mist of oil into the flowing air stream to automatically provide the correct amount of internal lubrication for air tools and other pneumatic devices. This type of lubricator can be precisely ...

Easier Access For Simplified Cleaning Cleaning and maintaining your material receivers is now faster, easier and safer than ever before. That’s because the unique angled canister design of the Conair Access Receiver means workers don’t ...

Flow: 54 m³/h - 11,250 m³/h
Weight: 1.2 kg - 171.9 kg

Make condensate treatment more effective and environmentally friendly with the OWS 4-900! AVAILABLE MODELS : Different sizes ADVANTAGES : Clean waste water | Straightforward Service | Low maintenance FOR WHOM ? For all applications ...

Automatic & no-loss stabilisation The CSS stabilisation system is based on targeted adsorption of polyphenoles. This ensures gentle and extremely effective beer stabilisation. It can be easily integrated into any filter line. The stabilising ...

Compressed air lubricator made of zinc which lubricates in proportion to flow rate. It can be mounted on walls through drilling holes on its body. It is suitable for both compressed air and non-corrosive gases. Its bowl is either made ...

Lubricators series "UZL" are produced with connections G1/4"; the techno-polymer bowls can carry a metallic protection or being entirely metallic (without visualization of level). For a correct lubrication it is advisable ...