Other flow, pressure and level measurement equipment

Pressure: 0 MPa - 250 MPa

JY series piston gauge is our new R & D product manufactured according to the latest national “piston gauge” test procedures (JJG59-2007). The key components of piston gauge uses a tungsten carbide material with a high hardness and low ...

Ultrasonic water meter • Nominal diameter: DN15/DN20/DN25 • Dynamic range: Q3 / Q1 R250 / R400 / R800 / R1600 • Installation sensitivity class: U0/D0 • Temperature class: T30/T50 • Metrological class: Class 2 • Pressure rating: ...

Widely used for the Natural Gas Distributor Companies to measure the gas volume utilized by the client and charge it, these Pressure Regulating and Metering Skids can be manufacture with different layouts to optimize the local installation ...

For quick and easy phase testing of sockets, distribution boxes, switches and lamps. Locates cable breaks and defective lamps in chains of light and insulated cables. For testing the phase sequence (right/left) and phase balance in ...

The TS8300 is professional digital media converter with multiple inputs and outputs, and it can receive, process and distribute diferente signal sources such as: digital audio and video over IP, ASI or RF; digital data such as: Closed ...

Suspended arrangement along the sidewalls Oscillators featuring fixtures for screwing on Flanged-in bushings for power supply

The One Component Foam Measurement device OCFM is specially designed to measure the rise profile, the rise pressure, and the reaction temperature of One Component Foams (OCF). The OCFM comprises a narrow cardboard cylinder and a special ...

VGC50x Vacuum Gauge Controller Sustainable solution for process measurement, control and data log. Compatible to the wide range of INFICON active gauges, the new VGC50x series of active gauge controllers are able to monitor and data ...

Indumart ITP215Current to Pressure (I/P) Converter produces a pressure output signal directly proportional to its 4-20 mAcurrent input. Premium grade and precision electronic components are used throughout this instrument to assure excellent ...

High Flow, High Accuracy Electronic Vacuum Regulators Vacuum ranges from 0 to 29.9 inches of mercury vacuum with flows of hundreds of SCFM can be achieved when a vacuum calibrated QB2 is used with an air piloted vacuum regulator. Vacuum ...

KACISE KUHM2100 series heat meters adopt most advanced non-magnetic technology and it features elegant appearance, accurate measurement, convenient management, steady operation, strong anti-erosion, and long using life, which is secure ...

A selection of the valve components suitable for a given application. Blocks made of various materials, preferably aluminium or steel. Fully assembled and functionally tested. By fully equipping control blocks with valves, we offer ...

The CNPS-ML-B11 drilling fluid density sensor uses a differential pressure differential mode of operation. Two pressure bellows with corrugated membranes installed at different heights detect the pressure difference produced by the liquid ...

Frequency: 48 kHz

The ultrasonic transducer utilizes piezoelectric effect to convert electricity to mechanical vibration and form ultrasonic waves. Therefore no coil is contained and electromagnetic interference can be greatly reduced. The ultrasonic wave ...

° 4 test positions ° Test Temperature Range : Ambient to 120°C ° Computerized and fully automated test ° Direct pressure measurement in the vessel ° Quick coupling ° Possibility to monitor the test up to 96 hours ° Data Storage ...

Frequency: 30 kHz - 170 kHz

The success of a large cleaning system depends mainly on Ultrasonic Generators and Transducers. We offer efficient ECO-Generators. Due to their compact design they require less space and are usable in a raw environment. This is allowed ...

Insight into the functioning of your HVAC system is a definite must when you want to achieve perfect control, reduce its energy consumption and thus obtain a sustainable, cost-efficient heating or cooling installation. The robust, accurate ...

Frequency: 20, 30 kHz

The E Series family of transducers are formed by a model of 20Khz and another one of 30Khz. These are all encapsulated, depending on the model; either stainless steel or aluminium casing can be used. Perfectly accessible inside for any ...

Fuel Density Sensor Performance Technologies are yet another key product group within Auxitrol Weston’s extensive portfolio which already boasts over forty years of Density Sensor specific expertise, including the development of our unique ...

Nagman's Hydraulic Deadweight Tester showcases up to a 700/1,000-bar (10,000/15,000-psi) pressure range, a single/dual piston type, and a range of varying accuracy rates (±0.1% of Reading, ±0.05% of Reading, ±0.025% of Reading, and ±0.015% ...

A suction lance can be used to extract liquids from containers and add them to the relevant process in exact doses. The standard PVC suction lance is available in lengths of 525, 775 and 1,300 mm. Specific lengths are available upon request. Thanks ...

• nature friendly, long lifetime • Digital large display • IP 68 • No magnet effect • Digital large display • Remote reading options • Accurate water flow measurement ...

The new PolluCom F is Sensus’ next generation mechanical thermal energy meter following the successful PolluCom E with multiple new features. A major new feature is that the PolluCom F is now equipped with wireless communication ...

SJG1914c is a new generation of all-englishmicrocomputer high-grade instrument of our company. It has an all-Chinese display, Chinese menu operation, full intelligence,multi-function, high measurement performance and strong environmental ...

Explorer Mini Smart Volume Corrector Explorer Mini is the new EVCD by Pietro Fiorentini designed to optimize installation and maintenance. It meets the most recent regulations and maintains compatibility with existing Explorer family ...