Other thermal treatment equipment

Bosch Air preheating system APH - For increased system efficiency and reduced fuel consumption of up to 2% - Prewarming of the combustion air takes over a small portion of the thermal output of the burner - Lower investment costs in ...

Operating pressure: 1.4, 2.8, 4.1, 5.5, 6.9 bar

Model 8292 Gen4 Ion Air Cannon EXAIR's Gen4 Ion Air Cannon and Gen4 Power Supply includes the Model 7960 selectable voltage power supply (115VAC/230VAC, 50/60Hz). The Gen4 Ion Air Cannon neutralizes static electricity and cleans at distances ...

Model 8299 Gen4 Ionizing Point In some situations, even the smallest amount of airflow can disturb the product. This is especially true for lightweight materials. EXAIR manufactures the Gen4 Ionizing Point to be effective for spot neutralization ...

With its advanced heating technology, the Eppendorf Concentrator plus facilitates fast and efficient, gentle vacuum concentration of DNA, RNA, nucleotides, proteins and other liquid or wet samples. Its new coated lid provides superior ...

Maximum temperature: 1,250 °C

The CaseMaster Evolution (CMe) is a new generation of sealed quenching solutions for a wide range of LPC applications for various industries such as aerospace, automotive, machine-building, bearings and commercial heat treatment. There ...

Maximum temperature: 200 °C - 1,350 °C

Vector is a single-chamber vacuum furnace that can be used for a wide variety of heat treating processes and applications, such like hardening, tempering, annealing, brazing, low pressure carburizing and sintering. Vector provides ...

Vector HV is a horizontally or vertically oriented single-chamber high vacuum furnace using gas cooling which can be used for a wide variety of heat treating processes and applications. It provides important capabilities for producing ...

Maximum temperature: 20 °C - 300 °C
Capacity: 32 l
Width: 400 mm

Universal oven UN30 Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance. Standard delivery Universal oven The universally applicable lab oven U is Memmert’s classic appliance ...

Maximum temperature: 20 °C - 300 °C
Capacity: 32 l
Width: 400 mm

Universal oven UN30plus Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance. Standard delivery Universal oven The universally applicable lab oven U is Memmert’s classic appliance ...

Maximum temperature: 20 °C - 300 °C
Capacity: 32 l
Width: 400 mm

Universal oven UF30 Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance. Standard delivery Universal oven The universally applicable lab oven U is Memmert’s classic appliance ...

Both raw oats and oat kernels can be treated using the Schule kiln. Through direct addition of steam between the prebin and the kiln, heat and moisture are introduced into the product before it enters the kiln. As it passes through the ...

Indispensable in the production of flakes : The SCHULE moistening and heating screw ideally prepares cereals and legumes for the kiln-drying and flaking process Flaking, Hydrothermal treatment Oats, Rice, Spelt, Buckwheat, Wheat, ...

Flow: 265 ft³/min - 620 ft³/min
Nominal power: 420 W

The Aerostat XC2 provides complete area ionization protection. As with its’ predecessor, the Aerostat XC2 is designed and built for reliable, long-term static control for a variety of electronic, semiconductor, flat-panel display and ...

Flow: 660 m³/h
Nominal power: 140 W

The VolumION is a very robust ionizing air blower with an effective ionising width of 500 mm. The VolumION consists of a motor, two fans and an ionisation unit. Ambient air is drawn on two sides and blown off along three anti-static bars. ...

Nominal power: 120 W

The HP-N-Ex ionizing air blower consists of a motor and a fan. The ambient air is drawn on one side and blown off along an anti-static bar. The effective ionizing width is 500 mm. This ionisation blower has been approved for use in certain ...

Maximum temperature: 1,000 °C
Capacity: 7.2 l
Width: 74 cm

5E Series Muffle Furnace is used to determine the ash, volatile matter in coal, coke, biomass and other organic material. Standard Configuration: Main analyzer Ash crucibles Volatile matter crucibles Lids for volatile matter crucibles ...

This new RVC is a compact, versatile and durable benchtop unit for everyday laboratory use.Innovative heating with four infrared lamps ensures fast and efficient vacuum concentration. Optimal results are facilitated by robust measurement ...

Basic model Compact benchtop mini concentrator for fast and efficient vacuum concentration, at home on every lab bench. Optimal processing without sample splashing is ensured by modern technology with variable-speed magnetic drive, automatic ...

HCl resistant version Compact benchtop mini concentrator for fast and efficient vacuum concentration, at home on every lab bench. Optimal processing without specimen splashing is ensured by modern technology with variable-speed magnetic ...

Maximum temperature: 1,200, 1,100 °C
Width: 230 mm - 1,400 mm
Height: 200 mm - 1,200 mm

The EASYBOX range consists of a wide type of models of horizontal chamber furnaces, intended for heat treatments in air or in a neutral controlled atmosphere. The furnaces, available in many sizes, can also be made to measure and equipped ...

Maximum temperature: 1,100, 1,200 °C
Width: 180 mm - 750 mm
Height: 140 mm - 600 mm

Made up of gas-tight models, the EASYBOX range of horizontal chamber furnaces is available in an CA version, a series of furnaces designed to work in a controlled, neutral or flammable atmosphere according to standard NF EN 746-3 + A1. ...

Maximum temperature: 500, 700 °C
Width: 230 mm - 1,000 mm
Height: 150 mm - 1,000 mm

Forced convection horizontal chamber furnaces for precision low temperature heat treatments up to 500 or 700 ° C. Powerful stirring assemblies combined with carefully placed baffles force a homogeneous flow of hot air into contact with ...

Maximum temperature: 0 °C - 460 °C

COMPACTCLEAN is a compact, environmentally and user friendly pyrolysis system (pyrolysis furnace, pyrolysis oven) which removes all plastics from small tools and components.

Maximum temperature: 220 °C - 400 °C
Capacity: 0.2 m³ - 8 m³
Width: 60, 150, 125, 100, 75 cm

Reproducible results plus the product quality connected to it, minimum space requirements, short processing times and a high level of productivity are the requirements in all industrial production areas. Your components and materials ...

Maximum temperature: 350 °C

Heating and Drying Ovens for Clean Rooms, VTF The VTF heating and drying oven for clean rooms is characterised by the low-turbulence flow with particularly uniform temperature distribution, required for optimal and repeatable production ...

Maximum temperature: 200 °C

Industrial Ovens/ Heating and Drying Ovens, VTU Standard heating and drying oven for manufacturing. The heating and drying ovens in the VTU series are our all-rounders and are suitable to be used in the production of automotive ...

Maximum temperature: 1,150 °C
Width: 2,800 mm
Height: 1,100 mm

The heat treatment line is composed of 5 batch furnaces in nitrogen atmosphere with radiant tube heating elements. The line is designed to treat stainless steel wire rods and can perform various processes as: normalizing, austenitizing, ...

Maximum temperature: 880 °C

Batch roller furnace with loading machine in protective atmosphere for the heat treatment of steel wire rods. The load placed on special reels is positioned by means of an overhead crane on the specific loading/unloading machine with ...

Maximum temperature: 1,100 °C
Width: 2,200 mm
Height: 2,200 mm

Heat treatment bell furnace with three bases and translation crane on rails. Heating is by high speed gas burners above and below the load for optimal uniformity.

Maximum temperature: 2,300 °C
Capacity: 75 l
Width: 40 cm

The Cristal range is made of furnaces dedicated to heat treating under vacuum at high temperatures. The enclosure is insulated with specific metals, with a possible choice of molybdenum or tungsten resistors. It is the perfect tool for ...

Maximum temperature: 1,200 °C
Width: 1,220 mm
Height: 915 mm

The ECO Furnace is a vacuum, double chamber installation including a furnace and an integrated oil quenching cell. This compact system aims at replacing sealed quench furnaces or IQ furnaces for hardening or carburizing operations. ...

Thanks to their updated design, the low pressure carburizing ICBP® Mono from ECM lets smaller producing units enjoy the benefits of the INFRACARB® process. Indeed, the ICBP® Mono range gathers all of the established and validated solutions ...

Maximum temperature: 0 °C - 450 °C
Width: 214 mm - 900 mm
Depth: 263 mm - 5,000 mm

The ECON pyrolysis furnace was developed for environmentally friendly and gentle cleaning of extrusion and filter parts. Thermoplastics and mixed plastics are removed under vacuum without any cleansing agent at a variable working temperature. ...

Maximum temperature: 200 °C - 1,600 °C

This High-Temperature Furnace is developed by Zwick Roell. It delivers the determination of thermal-elastic behavior, heat resistance and re-crystallization temperature of products. This furnace comes with different options from a temperature ...

Maximum temperature: 1,100, 1,200, 1,600 °C
Width: 495 mm - 1,465 mm
Height: 575, 655, 455 mm

Carbolite Gero’s versatile new TF tube furnace range incorporates high-quality heating elements and innovative thermal insulation design to achieve first class performance while maintaining both reduced case temperatures and power consumption. The ...

Maximum temperature: 30 °C - 250 °C
Capacity: 128, 66, 28 l
Width: 590, 690, 790 mm

The Apex AX range of 250°C laboratory ovens comprises three bench-top sized models equipped with the R38 digital PID temperature controller. Standard features Equipped with the R38 digital PID temperature controller Fan convection ...

Maximum temperature: 30 °C - 300 °C
Capacity: 28 l - 910 l
Width: 665 mm - 1,615 mm

Laboratory ovens of the Peak series 300°C are available as both PF fan convection and PN natural convection models. Fan convection provides greater temperature uniformity and faster recovery rates than natural convection. Standard ...

VPN Concentrator with Ethernet connection VPN OpenVPN / SSL server and client VPN IPSec Up to 100 VPN Redundancy Modularity (addition of a second SIG to aggregate the number of VPN tunnels) Firewall (Stateful Packet Inspection) IP ...

VPN Concentrator with ADSL connection VPN OpenVPN / SSL server and client VPN IPSec Up to 100 VPN Redundancy Modularity (addition of a second SIG to aggregate the number of VPN tunnels) Firewall (Stateful Packet Inspection) IP ...

VPN Concentrator with cellular connection VPN OpenVPN / SSL server and client VPN IPSec Up to 100 VPN Redundancy Modularity (addition of a second SIG to aggregate the number of VPN tunnels) Firewall (Stateful Packet Inspection) IP ...

Maximum temperature: 1,100 °C
Capacity: 7 l - 45 l

Definition: Electric chamber furnace for all applications. Construction: Robust construction made of bent plate. Vertical lifting front door. Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks. Aeration: ...

Maximum temperature: 600 °C
Capacity: 55 l - 1,550 l

Product Description Construction: Mechanically welded frame. Racks according to model. Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks. Aeration: Air intake and exhaust controlled by temperature controller. Heating: ...

Maximum temperature: 650 °C
Capacity: 2.8, 8.8, 35.6 l

Definition: Furnace for working with H2 atmosphere (hydrogen, cracked ammonia, forming gas etc.). Construction: Robust construction made of bent plate. Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks. Ventilation: ...

Maximum temperature: 1,000 °C

Application Area Intelligent Muffle Furnace applicable in the industry such as electrical power, coal, commerce inspection, environment protection, metallurgy, paper making, petrochemical, earth probe and research institute or quality ...

Maximum temperature: 0 °C - 250 °C

Microwave Digestion & Extraction System Parameter • - Microwave output power and frequency: 0-1300W, stepless adjustment; 2450 MHz • - Microwave résonance radiation cavity: 65L, internally installée] corrosion résistant internally clapboard • ...

Maximum temperature: 0 °C - 120 °C

Device enables multipurpose usage. It works in 3 different modes namely, direct ultrasonic, cooperative mode and opening microwave. Microwave power ranges between 10W-800W which is adjustable. Microwave frequency is 2450MHz. Ultrasonic ...

VERMES Microdispensing MDS systems can be equipped with heaters. A distinction is made between two types of heaters: the nozzle heater and the cartridge heater. The latter one is used in particular for hot melt applications. The dynamic ...

2-channel controller for perfect temperature control The MHC 48-2 ensures highest precision dispensing by controlling and maintaining highly accurate temperature during the dispensing process. This 2-channel heater controller has ...