With the corrugated conduit cutter type m-cut, the cable protection conduits from Murrplastik can be cut to length easily and safely. The application can be used by both the right and left-handed. A sturdy double-edged blade has ...
Available for M04-M36 It is advisable to use a stop sleeve for optimal damping stroke adjustment. In this process, the end stop and the damping stroke can be adjusted individually by screwing the sleeve on the shock absorber external ...
Textile Diaphram Bursting Tester With Automatic Hydraulic Minimum1 SET Delivery15 days after order. CountryChina BrandNameHD PackageEach set protected with resin fiber and PP film, then put into Strong wooden case with operation ...
Textile Diaphram Bursting Tester With Automatic Hydraulic Minimum1 SET Delivery15 days after order. CountryChina BrandNameHD PackageEach set protected with resin fiber and PP film, then put into Strong wooden case with operation ...
With the baromax coning tool cones required for high-pressure connections can easily be cut on tubing of sizes 1/4", 3/8" and 9/16". Product variants: Pipe OD: 1/4", Cone Angle (α): 58°, Cone Width (b): 2,6mm Pipe OD: 1/4", Cone ...
The inner cones of high-pressure connections are sometimes damaged by over- or frequent tightening. With the baromax reseating tools these damages can be reworked.
Push force: 320 N (~ 32 kg) Pull force: 540 N (~ 54 kg) Travel: 76 mm (~ 3 inch) Bending radius: 51 mm Low slip-stick effect thanks to teflon coated inner member V2A stainless steel connection parts M5 thread on end parts Diameter ...
Push force: 200 N (~ 20 kg) Pull force: 250 N (~ 25 kg) Travel: 76 mm (~ 3 inch) Bending radius: 51 mm Low slip-stick effect thanks to teflon coated inner member Aluminum T-Grip cap, connection thread M10x1 Stainless steel connection ...
The Styrocut C250 Electronic is perfectly suitable for cutting polystyrene hard foam plates with a thickness of 250 mm. Order No. 5201260 Scope of delivery: 1x blade 200mm length 1x blade 250mm length 1x cutting guide incl. stop 1x ...
Power: 20 W
Suitable sealing structure provides excellent oil resistance, suitable for environments with high temperature cutting oil Suitable for high pressure and high temperature water cleaning environments(IP69K) Tempered glass prevents damage ...
Qlight Co., Ltd.
Power: 12 W
Water / Dust proof LED work light that resists against severe storm and heavily dusty environment IP67 protection rating, waterproof & dust resistant model that can be used where dusty and flooded area Polycarbonate lens allows excellent ...
Qlight Co., Ltd.
Power: 40 W
Water / Dust proof LED work light that resists against severe storm and heavily dusty environment IP68 protection rating, waterproof & dust resistant model that can be used where dusty and flooded area Polycarbonate lens allows excellent ...
Qlight Co., Ltd.
All paper strip cutters are supplied with hold-down clamp and a set of spare cutting-wheels. They are suitable for papers with a grammage from 30 g/m² to 350 g/m².
Circular cutters produce circular specimens with defined surfaces for the flat crush test (FCT) to ISO 3035 and EN 23035.
SJ series is QFP lead hook/Chip shear jig with 100N capacity. It is designed for solder joint strength test. We offer 5 types to meet your testing requirements. Combine it with a force gauge, attachment and test stand to complete ...
To maximise the lifetime of the coupling and minimise pressure loss a good airtight hose/coupling fit is required. The progressive ratchet cutting action of the Elcometer blast hose cutter cuts rubber hose up to 63mm (21/2") outside ...
The Elcometer 266 Holiday Detector revolutionises high voltage DC testing of coatings porosity detection making it safer, easier and more reliable than ever before. User Friendly The voltage calculator automatically sets the correct ...
The Elcometer 132 Safety Torch/ Flash Light is explosion proof and meets the ATEX directive as category 2 equipment. Many environments can have low light or dark areas and explosive gas present; ballast tanks, oil and gas tanks, etc. ...
Length: 100, 150, 200, 300 mm
Use: in combination with 10Ø holed connectors for fastening and adjustment of product containment guides. Material: aluminium rod, galvanised steel nuts and bolts. Characteristics: millimetre scale for precise adjustment in format ...
M12x14, complete with M12 mounting. Body is made of case-hardened steel and blued. Clamping hook is made of case-hardened steel and blued. Tightening torque 75 Nm. Mounted using strength grade 10.9 screws. The mechanical side clamp ...
OML
A variety of foot brackets are available to enable 'flange only' fitted electric motors to be mounted in the horizontal plane and can accommodate motors with flange diameters from 160 to 660 mm.
Sample preparation for RPA, MDR, and Mooney instruments is made safe and simple with the VS volumetric sample cutter. This dual-action pneumatic system allows for the preparation of uncured rubber specimens of a user-defined volume. Preparing ...
Self contained air operated lubricant dispenser, 25 litres. Mobile unit for viscous lubricants. 25 l capacity tank with 2:1 pneumatic pump, oil meter at pump outlet, 1,5 m delivery hose and oil gun with non-drip tip.
Gear oil dispenser, with 330 mm cover for 20 litre pails and 1,5 m transparent hose with nozzle. Gear oil dispenser, with 310 mm cover for 12 to 18 litre pails and 1,5 m transparent hose with nozzle.
The Wires Pulling machine is used to pull the required wires or strands along the casting beds, to the anchoring and tensioning positions. TECHNICAL FEATURES For pulling the required wires or strands along the casting bed. Powered ...
Made in Italy Simex consistently meets users’ demands, delivering them the best solutions to solve even the most complex application challenges. The PL SG planers for working under guard rails and PL RAIL planers for rail tracks are ...
Made in Italy Simex consistently meets users’ demands, delivering them the best solutions to solve even the most complex application challenges. The PL SG planers for working under guard rails and PL RAIL planers for rail tracks are ...
Plate Bevelers, Self Propelled, Portable - KBM-18® produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 1/4" (6.0 mm) to 1 1/2" (38.1 mm) thick. Thinner material can be beveled... ...
Elbow for connecting a horizontal and a vertical HLT profile tube 90° angle (rigid) Overhead mounting is possible Detachable lid for easy cable routing and mounting of a HLT profile tube
Length: 150 mm - 3,000 mm
Manufactured to DIN 866/2 these round ended steel rules start their graduations on the left edge. The top of the rule is graduated in inch readings 1/16", 1/32" and 1/64". The bottom is graduated in metric readings of 1/2mm and 1/1mm. Features • ...
Manufactured to DIN 866/1 the gauging surfaces have been precision ground. The clear and easy to read metric graduations start 5mm in from the ends. Features • Manufactured to DIN 866/1 • Manufactured out of spring steel.
Min. excavator weight in 2nd member configuration - 20 tons Min. excavator weight in 3rd member configuration - 30 tons Attachment operating weight 2nd member - 4300 Kg Attachment operating weight 3rd member - 4200 Kg Maximum ...
Standard - Factory standard Material - Hardened steel Dimensions - 2, 4, 6 - Weight [g] - 461 - Weight [lb(s - 1,0163
OPTIMAL ON-SITE STORAGE CNC bench stands from LISTA are available either as preconfigured models or as custom configurations. They can be supplied with screwed-in insert frames or supplied for tool-free mounting of tool cradles. ...
KEY ADVANTAGES •Portable, lightweight •Economic •Simple •Compact •Robust •Plug’n skive system
Please specify:
Help us improve:
remaining