Tube diameter: 219 mm - 324 mm
The TTNG323 is a machine for the orbital cutting of pipes and pipelines, especially those of great thickness and whatever the material considered. This solution is used for cutting, beveling, straightening and loosening and carries out ...
PROTEM
Tube diameter: 273 mm - 406 mm
The TTNG406 is a machine for the orbital cutting of pipes and pipelines, especially those of high thickness and whatever the material considered. This solution is used for cutting, beveling, straightening and loosening and carries out ...
PROTEM
The MS Series by Protem is a Flange facing tool which comes with a large male and female face flanges. For this specific unit it has different total working range. For those having a guiding, it has 1400 to 2300 mm. For those without ...
PROTEM
Power: 6 W - 6 W
The UV- and analysis lamp UV240 is used to determine the luminescence of UV radiation created by disturbances in the crystal lattice, and identify synthetic, composite gems and genuine or formed pearls. The UV series includes lamps with ...
Forged, heat-treated jaws for a powerful grip. Heat-treated nickle-chrome pin. Fast opening. Heavy-duty tool for securely tightening pipes in difficult-to-reach locations (water and gas pipes in trenches, pipelines, etc.).
VIRAX
A skived belt helps extend splice life, ensure compatibility with belt cleaners with a lower profile, and creates a stronger splice. For a safe, easy way to remove belt top covers, choose the portable, lightweight FSK Belt Skiver. • ...
Pressing force: 50 kN
The Novitool® Pun M™ Mobile Finger Punch is designed to effortlessly punch fingers into PU and PVC conveyor belts in preparation for installing endless splices. Depending on the desired finger dimensions, Flexco offers a variety of punchboards ...
Your universal magnet clamp for small welding and assembly works. Features: - Sturdy and maintenance-free - Max. operation temperature 80°C - Easy positioning, adjusting and fixing of workpieces - No disruption of the arc when welding
Assfalg GmbH
Your third indispensable hand for welding or assembly works on flat and round materials at 90° angle. Use additional MSQ to increase power. The MSQ can be put reverse for inside angle or slide up and down to adjust. Features - ...
Assfalg GmbH
Versatile workholding and fixturing magnet. The magnetic grip is powerful on the 3 long sides. A simple 180° turn of the knob to switch ON / OFF. Pretapped holes on 4 sides for mounting. Great for supporting guides and walls. MSQ is assembled ...
Assfalg GmbH
The VKS 125 is an expert for a special task – the device is cutting cable ducts with millimeter precision and without burrs. The centre piece is a blade made of hardened tool steel, cutting cable ducts and covers up to 125 millimeters ...
ALFRA GmbH
Pressing force: 44 tf
ALFRA GmbH
Infinitely variable from 0 to 90? No problem for our variable welding angle TMA 600. Compact, flexible and powerful – with a dead weight of only 2.7 kg, the device is mastering all tasks involving the alignment of heavy workpieces ...
ALFRA GmbH
Lithium battery spotter best suitable for all straightening processes of steel sheets. Free of cables, handy and powerful it is the indispensable tool for those who want to increase the efficiency of bodywork with a significant saving ...
Weight: 85 kg
The ultrasonic cutting station with integrated special actuator SV35-40 is suitable for cutting and sealing operations of textiles and fabrics with a minimum of 50% synthetic fibre content. Ideal for the edge trimming of retro-injected ...
Weight: 1.7 kg
HC35 hand cutters are suitable for manual cutting of textiles and fabrics with a synthetic content. They are suitable for straight cuts as well as for contour cutting. The carbide plate resp. the cutting wheel can be turned when worn. Cutting ...
Perpendicularity: 0.01/200 mm Material: aluminum casting Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 with clamping and base surface Base surface: with hole pattern according to table or drawing, suitable ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Clamping thread (M): M12 Grid pitch (R): 40 mm ± 0.01 mm Grid hole (D): Ø 16F7 Grid hole (E): 12 mm Perpendicularity: 0.01/200 mm Clamping surface face: smoothed after nitration Hardness: 700-100 HV1 Material: case-hardened steel Alignment ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Parallelism: 0.01/200 mm Clamping surface faces: finely milled or smoothed Hardness: unhardened Material: case-hardened steel Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 with base surface Base surface ...
ANDREAS MAIER GmbH & Co. KG (AMF)
Reduce employee repetitive strain injury by absorbing torque transmission normally reacted by the operator. The DR90-20004P torque arm is capable of supporting tools weighing up to 5 lbs (2.2 kg) and reacting maximum torques of 240 in-lbs ...
Delta Regis Tools
Groating, Flaking Oats, Rice, Spelt, Wheat, Rye, Barley No machine is more efficient: The SCHULE drum groat cutter boasts the best space/performance ratio. Via a continuously adjustable vibrating channel, the grain is fed into ...
The kit has been designed to give great versatility of use to the portable boring machines of the Supercombinata series. It consists in a facing head allowing flange facing and the creation of seats for seeger circlips and o-rings, by ...
Punch to remove solid electrical conductors Device details: ■ Preparation of cable samples for further processing ■ Applicable for cable types with solid core cross-sections ■ E.g. Sample preparation for cutting with ORC family
KAINDL WOOD-Plane - Milling disc for wood 115 x 20 x 22,2mm Developped for professional works in craft, creative- and carving work areas. Enables quick and clean surface removal on all soft- and hardwood. This makes it applicable ...
KAINDL REILING
The Super-Carver with its round carbide cutting edge works in horizontal as well as in vertical direction. Due to the chip thickness limiter and precisely processed disc body, the carver is controlled easily without kickback whilest having ...
KAINDL REILING
Kaindl Multi-Carver Cutter head with exchangeable carbide inserts The Multi-Carver works in horzontal and also in vertical direction. The Multi-Carver is very good controllable, due to the special cutting geometry, by a high cutting performance. For ...
KAINDL REILING
Rotational speed: 13,700 rpm
Diameter: 100 mm
The center wheel is depressed at an OD of 100mm. It has an exhaust system at the back and a handle at the side with vibration-damping. In case of replacement, the spindle lock can be used. Left/right mounting of the side handle is available ...
Nitto Kohki Europe
Super efficient way of easy filing, polishing and finishing SUPER HAND replaces work. SUPER HAND is ultra-small, ultra-lightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, ...
Nitto Kohki Europe
Super efficient way of easyfiling, polishing and finishing SUPER HAND replaces work. SUPER HAND is ultra-small, ultra-lightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, ...
Nitto Kohki Europe
A complete kit of four extractors especially designed for use with braided packings, which simplify and speed up the extraction of the rings to be replaced. The kit has the following diameters: 4, 6, 8, 10.
Tool designed to cut braided packings at 45° angles. The diagonal cuts are carried out with the help of a guide, so that each ring is identical to the other. This device allows all ring seals to be cut directly from the reel without off-cuts ...
The Texpack® gasket cutter is a device for producing gaskets with diameters ranging from 40 mm to 210 mm. Circular gaskets can be produced exactly to size. Any gasket material can be cut: asbestos-free, graphite, rubber, PTFE, PVC, carbon ...
The USM 2 peels from 5/8″ to 2″ on the inside and 3/16″ – 2″ on the outside. User-friendly operation for optimal results CE compliant Protective hood safety flap for injury-free work Safe mounting on the workbench
TM C – here the wheat is separated from the chaff! With its special coating the TM C cutting blade substantially reduces the power demand during cutting. Coated with fine, very hard particles it produces a precise straight cut leading ...
For beveling 0° and 30° Customized bits Corrosion protected Highest quality Made in Germany
DWT GmbH
Perfect Weld Preparation For all DWT bevel machines Customized Bits Highest Quality Made in Germany DIN 2559-3 DBS 34-R3 DBS34-R5 Customized tool bits on request
DWT GmbH
Working Range up to: 1219,2 mm Pipe wall thickness: max. 80 mm No heat affected zone (HAZ) with cold cutting Quick and safe clamping and adjustment Split-Frame Technology for endless thick-walled steel pipe Looking for the most ...
DWT GmbH
DH-series, Ratchet Head for 9x12 Rectangular Shank Head Torque Wrench
Rami Yokota B.V.
RRG-1040AL Cut-Off Tool 100mm This RED ROOSTER angled cut-off tool is used with 100mm mini cutting discs. The long neck, combined with the low profile angle head of this grinder offers good accessibility. Characteristics: • The ...
Rami Yokota B.V.
Power: 0.3 kW
Rotational speed: 3,200 rpm
Disc diameter: 75 mm
The Red Rooster RRS-60043K is a highly compact and lightweight polisher kit (75 mm) that features excellent balance combined with a robust and highly ergonomic design. It has a velcro disc quick and safe pad exchange, silenced air exhaust, ...
Rami Yokota B.V.
Application The PCD Carving Cutter for Stone applies to scribe line in stone material, engrave small pictures or characters, embossing, etc. It is particularly suitable to carve granite and ceramic. Features 1. Long service life ...
Beijing Worldia Diamond Tools Co., Ltd
The Diamond Cutter Axle features high precision abrasive resistance and cylindricity. It has an outer diameter that ranges from 0.80 to 1.40 mm, and a length that goes from .50 to 1.30 mm. Friction is decreased by the exact fit of ...
Beijing Worldia Diamond Tools Co., Ltd
Blade length: 100, 132 mm
Blade thickness: 1, 1.3 mm
sheet high-alloyed chromium steel such as stainless and acid-resistant steel. Height 7.5 mm Net weight 0.1 kg Technical data Coating - uncoated Material - HSS bimetal Tooth type - wavy set Technical data Coating - uncoated Tooth ...
RUKO GmbH Präzisionswerkzeuge
Net weight 0.027 kg Technical data Coating - uncoated Material - HSS
RUKO GmbH Präzisionswerkzeuge
Drill diameter: 1 mm - 16 mm
Rotational speed: 100 rpm - 450 rpm
The RU25 magnetic pillar drilling machine has a powerful motor with 1,200 watts, speed regulator, 2-speed gearbox and clockwise/anticlockwise rotation. The magnet of the RU25 has an adhesive force of 16,000 N, which ensures reliable ...
RUKO GmbH Präzisionswerkzeuge
Our special torque reaction arms are the result of an analysis of customer needs and of the consideration of ergonomic constraints on the line or at the workstation. They are designed and manufactured to optimize operator comfort and ...
DOGA
Ideal for vertical tightening operations, the BA serie linear arms are designed to be easily installed on your worktops. They are compact, robust and versatile thanks to the many options available. It guarantees perfect torque recovery, ...
DOGA
Ideal for vertical tightening operationswith programmed tightening sequences, the BA...PC serie linear arms are designed to be easily installed on your worktops. They are compact, robust and versatile thanks to the many options available. ...
DOGA
Rotational speed: 0 rpm - 100,000 rpm
Power: 80 W
100.000 rpm and an elastic spindle support mean you achieve anoptimal surface quality when working on metallic materials. Noise emissions are also low. Thanks to the turbo drive it can be operated without lubrication (oil-free). No chatter ...
BIAX - Schmid & Wezel GmbH
Rotational speed: 0 rpm - 85,000 rpm
Power: 100 W
This grinder, with its multi-disc motor, has a unique and patented oil-free drive. As with turbo drives, the machine needs no lubrication and is nevertheless slim and handy. It has the same durability of lubricated multi-disc motors. ...
BIAX - Schmid & Wezel GmbH
Rotational speed: 0 rpm - 85,000 rpm
Power: 100 W
This grinder, with its multi-disc motor, has a unique and patented oil-free drive. As with turbo drives, the machine needs no lubrication and is nevertheless slim and handy. It has the same durability of lubricated multi-disc motors. ...
BIAX - Schmid & Wezel GmbH
The KITSO-03 electrical intervention kit is a must-have for all electrical professionals seeking to carry out their interventions safely and efficiently. The kit has been carefully designed to provide a complete solution. It includes ...
PENTA
The KITSO-05 insulated electrical tool kit is the perfect solution for safe work on electrical installations. Comprising 18 professional-quality tools, this set guarantees protection against electric shocks up to 1000 volts. Each tool ...
PENTA
Diameter: 16 mm - 58 mm
Multifunction tools for sheath, peelable semiconductor with chamfer and insulation Standards Compatible with C33-226, UTE C33-223, NF C 33-223, HN33S23 Use MF3/40-C and MF3/60-C are adjustable multifunction tools that allow : - ...
PENTA
Various tools are available that can be selected according to the difference in torque band and installation area. This arm unit ensures a wide working range by means of parallel link and swivel mechanism.
Estic Corporation
Various tools are available that can be selected according to the difference in torque band and installation area. High durability arm unit for torque tightening up to 120 N·m ( 88.5 ft-lb ).
Estic Corporation
Various tools are available that can be selected according to the difference in torque band and installation area. This arm unit has a 2-arm parallel link mechanism that can be installed even in a narrow workplace.
Estic Corporation
Please specify:
Help us improve:
remaining