Other heating and cooling equipment

Power: 18,000 kW
Temperature: 95 °C

The unique and mobile all-rounder for professional H14 HEPA air purification, high-performance room heating, thermal decontamination and thermal disinfestation Heat, treat, repeat. Our vertical heater exclusively available at Trotec: ...

Power: 280 W
Temperature: -25 °C - 60 °C
Pressure: 0 MPa - 10 MPa

The RS-HTC280 is pilot-operated electric heater which function is to heat gas of pilot and avoid condensation, liquefaction, icing of gas because of large pressure drop and temperature decreased sharply by gas endothermic. It’s suitable ...

Power: 250 W

Description TH tank heaters are intended primarily for application in hydraulic control systems for machine tools, presses, hydraulic elevators, servo systems, etc. where overnight conditions or periods of non-operation cause the temperature ...

High-Performance, In-Process Wire Heating BETA LaserMike Preheaters provide uniform, in-process wire heating to eliminate insulation voids in primary cables. • Improve Performance and Quality – high-frequency heating ensures faster ...

Power: 500 W
Temperature: 20 °C

3P-FluoLiner® sheet products are used as a protective barrier against corrosive chemicals with a strong adhesive capacity on steel substrate. Our products are used for their high technical performance such as their chemical inertia ...

Thermafiber® Industrial Blanket is an economical, flexible, mineral fiber insulation that offers excellent thermal and acoustical performance in both hot and cold applications. APPLICATIONS Mechanical Pipe and Equipment > Flatwork Mechanical ...

Power: 12,000 W
Temperature: -25 °C - 70 °C
Pressure: 0 MPa - 0.5 MPa

forced circulation water engine heater is composed of 3 parts: control section, water pump and water heater. If during cranking the outside temperature is lower than 4ºC, engine coolant and lubricant may condense into solid state and ...

Smaller footprint Flexible operating fuels Cost-effective No moving components One source supplier Our calciner aims to offer a more productive experience At FLSmidth, we understand how important it is to have a ...

The heater will keep temperature of iron tips during operation. Achieving resilient and high power unit at the same time. Ideal for components that require large heat capacity. This is a dedicated heater, which was carefully calculated ...

Increase of capacity achieved by a higher mat temperature. Microwave radiation allows an efficient and homogeneous temperature buildup in front of the press. Application PB, MDF, OSB and LVL board production Customer benefits Increase ...

Power: 119 kW - 1,201 kW

POWERFUL AND RELIABLE The MegaTherm® pool heaters are designed for commercial, institutional and large residential pools where economical performance and rapid heat-up are required. Available in indoor and outdoor models in both natural ...

Low total cost of ownership More efficient NOX reduction Reduce ammonia consumption Flexible choice of fuel Reduced build-ups and less cleaning A cost-effective, efficient in-line calciner that reduces NOX emissions The Low NOX ...

Power: 120 W
Temperature: 0 °C - 150 °C

Technical specifications Mains voltage:120 W/230 V, 50/60 Hz Length:609 mm Width:155 mm Height:160 mm Weight:6 kg Areas of application: • The heating chamber heats the entire length of the electrodes • Ideal for assembly work • ...

OUR EUTECTIC PLATES A eutectic solution is basically a mixture of water and salts whose melting point (or freezing point) is constant and lower than that of water. For example, a -17°C eutectic liquid will melt (or solidify) at -17°C: ...

Our RAK products are state-of-the-art water/ration heaters for modern mechanised forces around the world. They consist of: • RAK 15, which operates off 15 amps and is designed for installation in tanks and trucks • RAK 30 which draws ...

Best suited for warehouses and supermarkets The sophisticated design is suitable for both wall and ceiling installation. With a heat output of 4 to 135 kW, an optimum expansion of existing or planned hot water heating systems is possible ...

Closed loop type heat recovery system with indirect contact between exhaust air and the fresh air to be heated No condensation of oils and/or paraffin during the heat exchange Easy installation and operation No need of daily ...

Power: 300 W - 600 W
Temperature: 75 °C - 130 °C

Heater device : PTC semi-conductive Heating body : Eloxal aliminium profile IP Rate : IP 20 • 110-230 V AC/DC • In line with the CE norms. • Mounting on 35mm DIN rail with a clip-on.

Power: 250 W
Temperature: -45 °C - 70 °C

Model: JRQFM250BAP Heating performance(Tu=+20℃): 250W Rated voltage: 230VAC 50/60Hz Power consumption: 261 Staring current: 2.4A Weight: 1500g Volumetric air flow: 160m³/h Protection class: IP 20 Operating temperature range:  -45℃ to +70℃ (-49°F ~ +158°F) Storage temperature range: ...

• Speed adjustment (optional) • Low noise level • Low energy consumption • IP44 motor protection class • Min/Max Ambient temperature -25/70°C • Possibility of connecting CO2 and air quality sensors • ...

Power: 1 kW - 647 kW

Overview VENCO electrical heaters are used to heat the outdoor air or reheat the supply air in the ventilation systems. Moreover, they are used to increase the supply air temperature with heat recovery ventilators. The heating elements ...

INDUSTRIAL HEAT RECOVERY Industrial recuperators have flow rates from 670 to 5800 m³ / h and comply with the European regulation of ecological design (1253/2014). Characteristics: - Electronic motors with EC technology for low electricity ...

Water heaters HDW are used to heat the air in ventilation systems. Water heater HDW is closed lid, which allows inspection and cleaning of the heat exchanger. Water heater HDW has two round spigot connection with EPDM gasket. The casing ...