Other air conditioning equipment

Air flow: 0 m³/min - 7 m³/min

The AT 160 takes air treatment to a whole new level. The AT 160 converts hot, wet and oily air that compressors produce, through a series of filters to produce cool clean air. Moisture and particulates can compromise the cleaning efficiency ...

1.Recovery,vacuum,charge, purity 2.Fully automatically operation 3.LCD display 4.Operation & service prompt 5.Drain compressor oil automatically 6.High/Low pressure protection 7.Incondensable gas purge automatically Technical ...

Gentle and consistent product cooling The Thomas L. Green Forced Air Ambient Cooling Conveyor significantly reduces the internal heat of products immediately after they exit the baking chamber. Our cutting-edge equipment optimizes ...

Automatic pouring and cooling lines with the possibility of tracking software to control the cooling time.

Tool for pressurizing and checking the hydraulic suspension system spheres. • - Developed in collaboration with the Car Maker’s repair methods. • - Customized design and manufacture according to a specification.

Power: 1.35 kW - 412 kW
Maximum temperature: 12, 35, 7 °C
Flow rate: 700 m³/h - 57,000 m³/h

New range of MNF series air condensed chillers, three versions available. M version (single-phase) stainless steel tank, coaxial evaporator, rotary compressor. E version (three-phase) plastic tank, plate evaporator made of stainless ...

Maximum temperature: 6 °C

For modern and efficient production processes At a glance: microprocessor-controlled cooling conditions ready to plug in delivery ex works - fst installation on the spot 1-truck to 6-truck units microprocessor control K-Touch 4012 available ...

Maximum temperature: -20 °C - 50 °C
Pressure: 5.5 bar - 12 bar

Tool for the rapid filling of the radiator and the cooling system of cars and trucks. The system is vacuum-operated and allows for the cooling system to be filled quickly and completely, without having to start the vehicle several times ...

The ITW GSE 3400 PCA is innovative, reliable and environmentally friendly. It supplies fresh, clean air into parked aircraft at carefully monitored temperatures and provides a pleasant atmosphere for the crew and the passengers. It also ...

Power: 13 kW

Air flow: 500 m³/h - 2,000 m³/h

The system basically includes the following components: ozone generator, ozone catalyst, fan and ozone measuring instrument. It is designed for indoor applications and suitable for a variety of oxidation and sterilization tasks. It is ...

Height: 1,200 mm
Width: 680 mm
Depth: 700 mm

• Provides homogeneous steam and heat production in the room. • Automatically controlled temperature and humidity in the room at the requested level via the thermostat and hygrostat inside of the device. • Stainless steel components. • ...

Power: 2.75 kW

Quick Details Condition: New Place of Origin: Guangdong, China (Mainland) Brand Name: Shantou Huaxing Model Number: LQ Application: shrimp chips/ round chips Voltage: 380V/50HZ Power(W): 2.75 KW Weight: 1700KG Dimension ...

Keep the engine in a proper temperature range under all operating conditions. The cooling system should not only prevent the engine from overheating, but also prevent the engine from undercooling in winter.

Power: 12.5 W

From hot to cold and vice versa with improved efficiency HANAU – VACUUMSCHMELZE GmbH & Co. KG (VAC) is developing of environmental friendly materials for magnetocaloric cooling. The collaboration with the Fraunhofer IPM Institute and ...

Cooling machine is used to be connected between the frying machine and the instant freezing machine, it blows air to the surface of the products, reduce the temperature of the surface products in order to deduct the load of the freezing ...

Power: 2.6 kW - 4.7 kW
Maximum temperature: 3 °C - 5 °C

Cooler generally works with cyclone and air fan, air lock. which is used to absorb cold air and clean dust, also it can install a screener at the cooler bottom, which can separate powder dust and good pellets. Features Cooler is mainly ...

Power: 37 kW
Maximum temperature: 30 °C
Flow rate: 13 m³/s

These machines are specially designed for applications in tunnelling and mining. All machines manufactured by us are submitted to a test run on our test stand. The pressure vessels are subject to acceptance tested in our factory by ...

Stainless Steel QTYHSeries High Pressure Air Treatment Units Stainless Steel QTYH Series High Pressure Air Treatment Units is suitable for all kinds of severe conditions, such as humid environment, high moisture content, high ambient ...

Flow rate: 10 l/min - 300 l/min

Air /oil coolers with blower or suction vent; air flow from 140 to 6,000 cm/H; oil flow 10-300 l/min; heat dissipable power from 1,000 to 30,000 Kcal/H; electric supply 12-24 VDC or 230-400 VAC at 50/60 Hz; optional termostat, pressure ...

An operating theatre is provided with preconditioned air by a central air handling unit (AHU). Nowadays, most hospital ventilation systems operate with a mixture of fresh and recirculation air. For operating theatres or minor surgery ...

DATA SHEET Construction Pressurized system with integrated pressure control. Easy to install and Compact plug and play booster set. Brand new asynchronous single-phase motor. Equipped with pressure transducer, non-return valve, controlled ...

Maximum temperature: 120 °C - 170 °C
Flow rate: 66 m³/h - 4,500 m³/h
Pressure: 15 bar

Air cooled aftercoolers series ACA are designed to reduce compressed air temperature and water vapour dew point in compressed air system. High efficiency axial fan forces ambient air over the heat exchangers copper tubes supported by ...

Power: 230 W
Flow rate: 6,800 m³/h

Air volume: 6800 m³/hour Air out size: 605 x 635 Water consumption: 6 – 11,5 l./H. Tension: 230 V. / 50 Hz. Consumption: 0,23 Kw. 3 speeds Water capacity: 120 l. Dimensions: 890 x 500 x 1380 mm. Noise: 56 dB. Net weight: 37 kg.

Maximum temperature: 30 °C - 32 °C

With €coenergy System for the cooling of the oil circuit of the presses DEGA has eliminated completely and all-year-round the use of a Chiller, saving up to 90% cost when compared with consumption of the chillers. The system consists ...