Other clamping elements

Clamping force: 20 kN

The sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece. Hold-down effect due to inclined arrangement of the clamping ...

The floating clamp is used to clamp and support additional clamping points on components. The benefits of the floating clamp are: Avoids vibration during the processing Clamps ribs, beads and shackles to reinforce clamped ...

Floating clamps with separate clamping and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can be designed individually. The benefits of the floating ...

These quick release fasteners provide positive locking in quick change applications where there is frequent insertion and removal of a fastener. They are designed to be used with ball-locking receptacle series QCBU-M. Lock nuts are available ...

Made from M-2 high speed steel. Hardened to Rc 60/62 with a black oxide finish. Serrated for positive holding in tough applications. Thru-hole tap. Flat on O.D. for setscrew mounting.

SWING CLAMPS - ONE-TOUCH MINIATURE - WITH HANDLE (QLSWC) These miniature swing clamps swing into position and clamp straight down onto the work piece for direct downward pressure. The arm swings completely out of the way to allow for ...

Clamping force: 10 kN - 600 kN

The Locking Unit is specifically designed to provide a good quality functionality and performance for several other purposes. It is a high quality apparatus which has the ability to retain forces in several axial directions used for various ...

Clamping force: 5 kN - 600 kN

Locking units are capable of retaining forces in both axial directions. They are used in a wide variety of machines. In most versions the clamping is spring actuated, and hydraulic or pneumatic pressure is required to release it. Shaft ...

Clamping force: 5 kN - 165 kN

Locking units are capable of retaining forces in both axial directions. They are used in a wide variety of machines. In most versions the clamping is spring actuated, and hydraulic or pneumatic pressure is required to release it. Shaft ...

ZERO POINT QUICK CHANGE DEVICES: 52/96 COMBO PLATES & RISERS 52/96 COMBO PLATES & RISERS SINGLE PLATES MASTER GAUGING PLATES ADAPTER PLATES RISER BLOCKS MULTI PLATES CLAMPING BRIDGES for 4-AXIS TWIN BASES TOMBSTONES 3-FACED ...

3-FACED PYRAMID MODEL：M-52X52(9314), M-96X96(9319) The highly durable system body, designed for easy accessibility and featuring recessed zero-point plates, proves to be an excellent choice for enhancing the operational efficiency of ...

STAMPING UNIT MODEL：ASC-153 SIMPLE, QUICK & ACCURATE: Simple setting, Quick pre-stamping, which can greatly improve the reliability of five-axis processing ASC-153 Stamping Unit can easily shape tooth profile on the workpiece, ...

The PLIO® flexible PVC perforated strapping can be used to fix and bind cables and cable harnesses, cords, wires and tubes. Available in transparent (for indoors), black - grey - yellow (for outdoors). Temperatures of use: -20 to ...

The HELAVIA® strapping, made of black nitrile rubber, can be used outdoors (weatherproof) to secure large cables, pipes or other items. Elastic and flexible, it won't damage cable bundles. Temperatures of use: -20 to +85°C Tensile ...

Well thought-out and easy to handle, robust and tried and tested.

Well thought-out and easy to handle, robust and tried and tested.

Well thought-out and easy to handle, robust and tried and tested.

Clamping force: 400 N - 5,000 N

Pneumatic Clamping Element For rails : 15 to 65 mm Type: Closed without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar

Clamping force: 1,300 N - 3,000 N

Double Piston Clamping Element For rails : 20 to 45 mm Type: Open without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar

Clamping force: 800 N - 5,000 N

Double Piston Clamping Element For rails : 20 to 45 mm Type: Closed without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar

Clamping device One advantage of the clamping devices is their perfect rigidity. Advantages of our precision clamping system: - Finely balanced for a long spindle service life and optimum milling results - Optimum concentricity ...

Discover the power of our manually operated inspection fixtures, designed with precision and versatility to meet your specific testing needs. With years of experience in custom fixture design and manufacturing, we deliver solutions that ...

Clamping force: 4,000 N

The mini clamping system with tightening via eccentric, resulting in a very low space requirement. The eccentric ensures precise, fast and powerful clamping (4000 N). With a height of less than 6 mm and a width of 20 mm, the plate clamps ...

Clamping force: 6,500 N

Comprising : 2 Mini driving clamps 09-110 1 Mini ƒOxed clamp / locator 09-150 (with screw and index) Made of spring steel (with clamping screw and positioning pin) Low mini driving clamp 09-111 clamping height 2,5 mm for low workpieces

Clamping force: 10,000 N

Complete kit 10000 Newton Comprising : 1 x 460 mm mounting bar 1 x bar-mounted driving clamp 1 x standard moving clamp / locator 1 x standard ƒOxed clamp Clamping screw and clamping key Clamp body The aluminium body slides ...

EASYCLAMP -a Popular clamp tool for plastic injection molding in Japan- Quick yet reliable mold replacement is realized thanks to its unique structure. One type of EASYCLAMP can fit 4 different heights just turning the block. As we ...

Heavy duty constructionWaterproof constructionLow magnetic field . 3 active faces . With ON/OFF mechanism . For small and thin workpieces Included with purchase: - 1 Actuating Key Use :GrindingEDMmetrology Pole pitch :2 mm1 ...

Heavy duty constructionWaterproof constructionLow magnetic field . 3 active faces . With ON/OFF mechanism . For small and thin workpieces from 0.5 mm thick Use :GrindingEDMmetrology Squareness :0,01 mmNominal force :N/cm²Pole pitch ...

Magnetic Block type BAPS Heavy duty constructionWaterproof constructionLow magnetic field - Suitable for alloyed materials - With or without actuating mechanism - Small pole pitch Use :GrindingEDMMounting Max. temperature of use ...

Clamping force: 0 N - 12,000 N

Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...

Clamping force: 0 N - 12,000 N

Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...

Clamping force: 0 N - 12,000 N

Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...

This is an Eccentric clamping device manufactured by Andilog Technologies which is designed for a sample which has one inch wide and a 0.375 in thickness. It features its functionality of having a self-closing cam clamps for a much reliable ...

This clamping solution is a modular fixturing kit based on a system of holes offered with three different grid types. Various basic, clamping and positioning elements can be mounted to devices adequate to the application case. The ...

On the interchangeable pallet, workpieces or fixtures are mounted, positioned and clamped on the mechanical 4-point clamping unit ZPS 52 or ZPS 96 of the zero-point-system ZPS. The interchangeable plate can be assembled separately during ...

The ALUMESS.basic fixturing system comes with a quick-change mechanism for easy changeovers of clamping devices on the base plate. Only an Allen key is needed. Chucking spigots and adapter bolts enable the easy mounting of the components. ...

EHG electromagnetic holding rods are used in fixture construction, for gripper systems and for a wide variety of tasks in mechanical engineering. EHG holding rods consist of a screwed, two-part system, are double-coated and sealed to IP 65.

MBX magnetic clamping blocks have opposite clamping sides that are activated when actuated. They are designed to clamp workpieces on steel surfaces such as machine or assembly tables. Several MBX can also be connected together via the ...

The magnetic clamping angle SWR 180 in the highest German quality. The extremely strong legs are separately switchable and the angle can be freely adjusted 45-225° and fixed with the locking screw. The prismatic base also allows round ...

Clamping force: max 120.0 kN

• side operation • low profile • with through-hole thread

Clamping force: 250, 80, 40, 180, 140 kN

SC – power clamping screw • wedge mechanism as force booster • high clamping force - low tightening torque • high operation safety • simple manual operation

Clamping force: 60 kN - 200 kN

• high clamping forces - low tightening torques • with bottomed thread - thread protected • centered operation • compact design - up to 200° C (optional up to 400°C)

Swivel clamps LKF of die-cast aluminum have a smooth fastening lug. The fastening lug is centered and situated at an angle of 90° to the flange face. The flange with two bores serves as an interface or for fastening the clamp to ...

Swivel clamps LKF of precision-cast stainless steel have a smooth fastening lug. The fastening lug is centered and situated at an angle of 90° to the flange face. The flange with two bores serves as an interface or for fastening ...

To fix aluminum profiles or other profiles securely on the floor Material: zinc-plated steel Color: galvanized Packaging Unit: 1 pc. Extras: Available for left and right mounting

To fix aluminum profiles or other profiles securely on the floor Material: zinc-plated steel Color: galvanized Packaging Unit: 1 pc. Extras: Available for right mounting

Clamping force: 2.7 kN - 17.6 kN

Inosol-Swing Clamp Hydraulic, max. 250 bar, DA This swing clamp is available both, as a plate-mounted and substructure version and as a plug-in version as well. - With thread- and flange connection - Long standard stroke - Pull ...

Clamping force: 1.4 N - 6.6 N

Compact Swing Clamp Hydraulic, max. 230 bar, double acting This swing clamp is interchangeable to competitive link clamps. Available as plug-in and manifold mounting type. - Mechanically insensitive - Low required space - Simple ...

Clamping force: 1.8 kN - 21.2 kN

Standard Swing Clamp Hydraulic, max. 350 bar, Single- and double acting These swing clamps are offered as a superstructure version and can be operated by means of the lateral threaded connections as well as via drilled channels on ...

The HSK product line represents machine tool components, such as customized clamping devices, machining units and multi turret heads. Our competences and long-standing experience are the basis for development of innovative concepts according ...

Automatic hydraulic clamping device for safe workpiece clamping