Other motors and accessories

Power: 120 W - 750 W

The NUERT Pump Motors has an engine that can be easily activated using the 48YZ engines. It is equipped with a direct connection that is especially designed for this particular type of engines with IEC B14 flange. They have a dimension ...

Asa position control system with multiple-axis function, GSK96 system can control Z/X/Y three axes with a control precision of 0.001mm. It can be set as single-axis, double-axis or three-axis control mode with parameters, thus realizing ...

Techn. Data / Items supplied Nominal voltage 230 / 400 V 50 Hz Protection type IP 54 Weight: approx. 6 kg weight = 5.300 kg/piece

Power: 50 W
Rotational speed: 30,000 rpm

50W. Power 30000 rpm speed It works with or without foot pedal.

Patented design, completely mastering the key technologies of the motor; Unique design, low starting pressure of motor, small pressure impact when switching between high and low speed, and superior performance to similar products of ...

Power: 4,000 kW - 40,000 kW
Rotational speed: 8,000 rpm

Jeumont Electric manufactures two-pole motors for use with variable speed drives up to 8,000 rpm and rated power from 4 MW to 40 MW and low-speed motors. Our permanent magnet propulsion motors offer a smaller form factor, enhanced ...

Power: 0.37 W - 3 W
Intensity: 2.73 A - 18.6 A
Rotational speed: 2,800, 1,400 rpm

ML series motor which adopting the latest design and high quality material. And conform to the IEC standard. The efficiency of motor meets EFF2 standard in Europe, and EFF1 standard if request. The motor has a lot of advantages including ...

Device that allows to get up to 3 signals from thermocouples. Input are insulated and it’s possible to contemporary connect different types of thermocouples. This device is able to Connect three independent thermocouples, galvanically ...

Feather keys DIN 6885-UNI 6604 (former ISO 773) Manufacturer - Chiavette Unificate S.p.A. Part Number - 3x3x8_Form_A

Power: 1,250, 1,500 W
Intensity: 3.3, 5.7 A
Rotational speed: 1,400, 1,700 rpm

A group of professional and senior R&D engineers, process technology and quality control talents are equipped with high-precision precision machining equipment such as OKUMA, MAZAK, BROTHER, HASS, etc., and the German ZEISS three-coordinate, ...

Current: 6, 12, 22, 32 A
Power: 1.2, 2.3 kW

The STB soft starter is designed to smoothly start (and stop) 3 phase induction motors. By employing a timed voltage ramp system you have greater control over soft-start and soft-stop performance reducing energy costs and enhancing the ...

Product overview: Planetary gearheads feature extremely high power transmission with a very short design. The modular design and the scaled stages provide the basis for a customer-specific solution. Metal components make use in a wide ...

Power: 0.6 W - 205 W
Intensity: 14 A - 27 A
Torque: 2.6 Nm - 560 Nm

Lightweight revolutionary synchronous motors for battery-powered vehicles, they offer lower weight and higher power in a smaller package thanks to innovative technology.

Torque: 0.014, 0.018, 0.03 Nm

Short Description: Series Model Step Angle Motor Length Rated Voltage Rated Current Phase Resistance Phase Inductance Holding Torque Detent Torque Rotor Torque Lead Wires Motor Weight ( °) (mm) (V) (A) (Ω) (mH) (N.cm) (N.cm Max) (g.c㎡) ...

Power: 100 kW - 50,000 kW
Diameter: 355 mm - 2,530 mm

Pole number:2-12 Voltage:380-11000v Frequency:50 and 60hz Protection level: IP44, IP54 Cooling method:IC611 Motor model: YR (YRKK, YRKS) Standard: IEC, DNV, GB YR (YRKK, YRKS) series 6kv, 10kv high-voltage three-phase asynchronous ...

Power: 2.2 kW

Minimum effort – Maximum gain: The decentralized Motormanagement System Field Drive System® is a reliable Intralogistics-Tool. The consistent integration of energy distribution along with state-of-the-art quick plug-in technology makes ...

Power: 1.1 kW - 15 kW
Intensity: 2.8 A - 22.7 A
Torque: 6.34 Nm - 72.7 Nm

The AC motors for high pressure pumps are motors with hollow or solid shaft. The range has been developed to be selected in combination with the most popular high pressure pumps brands, worldwide. The motors are in B3 with flange B14 ...

Power: 24.85 W - 186.42 W
Torque: 0.39 Nm - 0.77 Nm
Rotational speed: 0 rpm - 3,500 rpm

The M4000 Series Permanent Magnet Motor offers the design engineer a rugged product along with a great deal of design flexibility. • 1/30 hp up to 1/4 hp • 0.500" Maximum Shaft Diameter • 2.015" Standard Pilot Diameter • Class "F" ...

Power: 4,000 W - 524,000 W
Rotational speed: 2,800 rpm - 8,000 rpm

These asynchronous motors have been specially engineered to achieve dimensions of dc motors of similar power and to be suitable for high performance, flux vector type controllers in variable speed applications. The distinctive electromagnetic ...

ZYS series motor is special designed for compressor, frame size from 80 to 400, with insulation class F, tempreature rise is class B, under certain service factor the temperature rise is class F, special bearing is used when the service ...

Power: 50 W - 2,000 W
Intensity: 5 A - 200 A

The high-precision servo motor platform developed for med-ium and large inertia applications which is widely used in OEM industries such as laser, wood-working, metal processing, etc. Key OEM industry areas: Laser cutting, woodworking ...

Synchron 600 Series, K mount, AC timing motors offer all of the features of our C mount unit but the deeper gearbox allows more room for gearing so that we can achieve those extra slow speeds. The K mount unit can be geared down to a ...

Power: 31, 21.7, 61, 107 W
Intensity: 0.5 A - 83 A
Torque: 50 Nm - 780 Nm

Voltage : 12V DC Weight :340g Weight : 385g Weight : 499.4g

Power: 1.7 kW - 2.8 kW
Rotational speed: 4,500, 3,000, 6,000 rpm
Diameter: 194 mm

Traction drive for low voltage applications The TDS 130 series is a specially designed traction drive for low voltage applications. It's a lightwight, compact and efficient drive for robust working machines. According to your needs ...

Today, the three-phase motor is the „working horse“ in the manufacturing industry per se. But the direct start or star-delta starting is not the best solution in many applications, because unpleasant side effects e.g. mechanical shocks ...