Power: 0.33 ch - 10 ch
Torque: 1.0105 ft.lb - 30.0999 ft.lb
Rotational speed: 0 rpm - 1,800 rpm
Standard Features - Manual Reset Protectors - High Efficiency Dual Cap Design - High Quality Molded Gaskets - Over 300% Starting Torque - Cast Iron End Bells - Dual Oversized Ball Bearings - Dependable Mechanical Starting Switch - ...
Techtop
The advantages of the continuous hairpin lie in the economic feasibility of high numbers of slots with large inside diameters. With this technology, the prefabricated wire mat is inserted into the stator, making small wire cross-sections ...
Power: 750 W
Users have varied wishes when it comes to the right drive unit, including where drive power, transmission variants, reduction stages, closed-loop control systems, or connection technology are concerned. In order to provide even higher ...
EBMPAPST
Power: 0 W
Description Powerful torque motor with absolute encoder and electric and pneumatic rotary feed-through Field of application For all applications with exceptional requirements in terms of achievable repeatability, rotary speed, acceleration ...
Power: 5.5 kW
Numerous variants available on request Degree of protection: IP54 Benefits These compact, ergonomically designed starters can be wall-mounted or located remotely on a machine. Applications All machines requiring: DOL ...
Schneider Electric
Intensity: 1.8 A
Installation size: NEMA17/flange dimension 42 mm Holding torque: 0.5 Nm Nominal current: 1.8 A Motor connection: metric connector The integrated brake holds vertical loads safely in the application Control of the brake by means of ...
Parallel keys DIN 6885 are only in packing units of 50 pieces for each size and length available.
Konecranes motors The main function of the motors on a crane is to lift and lower a load, and to move the trolley and crane along the rails that take the load to a new location. Every Konecranes motor that we produce has been purpose-built ...
Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replaces M941A, C, D motors. Features & Benefits: Designed for flame safeguard applications in commercial/industrial oil ...
Diameter: 645 mm - 1,300 mm
Weight: 172 kg - 970 kg
The RUD drive wheel for central chains is not toothed. The running treads are made of CR-Mo steel and the running surface is inductively hardened. Application areas of RUD drive wheels for central chain • Vertical conveyor • System ...
Drive wheels for forked-link chain FORKY have a longer service life, because the tooth flanks are inductively hardened. Due to the multi-part design of the wheels, the toothed segment can be better replaced. Due to the multi-part design ...
Maximum payload (kg): 10 Rotation range: 360° Maximum speed (deg/s): 360 Positioning repeatability (deg): ±0.025 Dimensions - 55W x 160H x 150D Mass - \0.92kg Storage - 16 programs 999 points 2500 steps CE Version - Tbc. USER ...
Maximum payload (kg): 10 Rotation range: 360° Maximum speed (deg/s): 857 Positioning repeatability (deg): ±0.125 Dimensions - 55W x 160H x 150D Mass - \0.92kg Storage - 16 programs 999 points 2500 steps CE Version - Tbc. USER ...
OPTA EMR module expansion Type 8A.58.9.024.1600, digital version. Connection to OPTA via the AUX auxiliary port. Technical features: 16 digital/analog (0…10 V) inputs 8 EMR 6 A outputs Nominal voltage 12…24 V DC
OPTA SSR module expansion Type 8A.88.9.024.1600, digital version. Connection to OPTA and to the other modules via the AUX auxiliary port. Technical features: 16 digital/analog (0…10 V) inputs 8 SSR 3 A outputs Nominal voltage 12…24 V DC
Power: 400, 750, 100 W
Torque: 2.4, 0.32, 1.27 Nm
The Camozzi motors Series MTB have been designed to be connected in an easy and practical way to the new product range within electrical actuation, being able to drive both electromechanical cylinders and axes. The Series MTB of synchronous ...
Torque: 0.6, 2.5 Nm
The new Camozzi motors Series MTS have been designed to be connected in an easy and practical way to the new product range within electrical actuation, being able to drive both electromechanical cylinders and axes. The new Series MTS ...
Diameter: 80, 120, 140, 170, 160 mm
Operating temperature: 0 °C - 60 °C
Panasonic offers a wide range of variable-speed fan motors to meet the requirements of refrigerator manufacturers. Our motors are designed to provide exceptionally high operating efficiencies as well as low vibration levels. Due to ...
Power: 5.5 kW
Enclosed direct-on-line starters for use on AS-Interface line up to 5,5kW/400V. Degree of protection: IP54 Features Non-reversing or reversing DOL starters up to 5,5kW/400V Numerous variants available on request Degree ...
Power: 63 W - 500 W
Intensity: 5 A - 95 A
Torque: 0.22 Nm - 70 Nm
High performance gears Many DC geared motors are designed to reduce speed and are not suitable for transmitting high torque. tendo®-PM motors reliably transmit any torque possible based on motor power and gear ratio and run very quietly: ✓ ...
Intensity: 4, 5.6, 5, 6, 10 A
Torque: 0.8 Nm - 9.3 Nm
EAN code: 8024986949070 Quantity per package: 0 Minimum order quantity: 0 Unit of measure: items
Power: 200 W
Torque: 0.64, 2.2 Nm
Rotational speed: 3,000, 6,000 rpm
The following diagrams show the torque delivered by the motor with changing speed (rpm). Each diagram shows two separate curves: • NOMINAL TORQUE curve: the nominal torque delivered by the motor with a duty cycle of 100% • MAXIMUM TORQUE ...
Power: 60 W - 45,000 W
Torque: 0.9 Nm - 680 Nm
Our Z cylindrical-rotor motors perform a wide variety of industrial drive tasks – reliably and effectively. They are suitable for a broad range of applications, offering outstanding performance: motor output up to 45 kW inverter-fed ...
Power: 40 W - 55,000 W
Torque: 1.4 Nm - 610 Nm
Simple, robust and reliable – these are the key characteristics of our KB conical-rotor brake motors. Their unique brake operating principle eliminates the need for separate control or additional switching elements. This is due to the ...
Torque: 2.5 Nm - 50 Nm
Rotational speed: 3,300 rpm - 6,000 rpm
Expanded possibilities ABB is offering standardized motor unit packages complete with cablings, serial measurement board (SMB) box and safety options. The portfolio of six different motor units between 2.5-50 Nm max dynamic torque offers ...
【Main Feature】 FBL80 linear guide, fully sealed structure, body width 80 mm, it is designed for dust proof usage in hard environment, avoid dust or miscellaneous debris fall into body structure to affect working,large stretch,small compression,hard ...
Power: 200 W - 1,000 W
Rotational speed: 3,000 rpm
3000rpm AC Servo Motor with Brake 3000mm Power Lines Optional Encoder Lines 60/80 magnetic braided AC servo motor 17-bit single-turn absolute encoder Air Circuit Breaker It is used to protect the power line and cut off the circuit when ...
Power: 475 W
Intensity: 1.8 A
Torque: 75 Nm
TORQUE MOTOR iTM 240 -Energy efficient due to low losses✓ -Completely ready for use in a ready-to-install housing✓ -Hollow shafts for feed through✓ FEATURES: -Energy-efficient due to low losses -Completely ready for use in ...
isel Germany
Torque: 0.34 Nm
Rotational speed: 3,000 rpm - 28,000 rpm
FEATURES • - robust 2-pole AC motor (asynchronous motor) • - square shape • - Protection class IP54, insulation class F • - M23 plug connection • - A side: aluminium extrusion / B side: cast iron end shield • - motor shaft to take ...
isel Germany
Power: 900 W
Torque: 0.37 Nm
Rotational speed: 6,000 rpm - 24,000 rpm
iSA 900W | Spindle motor with automatic tool exchange Features • - robust 2-pole AC motor (asynchronous motor) • - square shape • - protection class IP55, insulation class F • - M23 plug connection • - cast end shield A and B ...
isel Germany
Current: 8.5 A
Power: 3.5 kW
The FEAS-softstarter is an electronic starter for AC-motors of the squirrel cage winding with slip-ring rotor constructional type. The function of a soft starter is to allow AC-motors to accelerate smoothly up to nominal speed, whereby ...
Diameter: 230 mm - 250 mm
TR-PowerHigh polyurethane wheels high thickness, aluminium centre, swivel top plate bracket PT with brake Wheel description TR-PowerHigh polyurethane tread, high thickness; hardness 92+/-3 Shore A. Aluminium centre. The housing ...
Diameter: 230 mm - 250 mm
"TR" polyurethane wheels, cast iron centre Wheel description "TR" polyurethane wheels, cast iron centre. These wheels can also be used as drive wheels: the wheel hub is manufactured so that it can be easily reworked to achieve a splin ...
Power: 1.5, 3.5 kW
for pipe cold cutting machine For heavy wall cutting and beveling Shock proof and corrosion proof Big bright screen Emergency stop Speed, torque and current are controlled during the cutting & beveling process To get the best ...
Please specify:
Help us improve:
remaining