Other motors and accessories

Power: 200 W
Torque: 0.6 Nm
Rotational speed: 3,200 rpm

Smaller and lighter than typical conventional motors for AMRs and AGVs. Maximum efficiency of 90% achieved. 1. Waterproof guarantee (conforms to IPX4) • IPX4 waterproof guarantee is realized by adopting a highly airtight waterproof ...

Power: 250 W
Torque: 1 Nm
Rotational speed: 2,400 rpm

Smaller and lighter than typical conventional motors for AMRs and AGVs. Maximum efficiency of 90% achieved. 1. Waterproof guarantee (conforms to IPX4) • IPX4 waterproof guarantee is realized by adopting a highly airtight waterproof ...

Power: 600 W
Torque: 2.3 Nm
Rotational speed: 2,660 rpm

Smaller and lighter than typical conventional motors for AMRs and AGVs. Maximum efficiency of 90% achieved. 1. Waterproof guarantee (conforms to IPX4) • IPX4 waterproof guarantee is realized by adopting a highly airtight waterproof ...

Gear ratio: 5 unit - 1,200 unit

Brushless DC motor with speed control via knob Features 30-300 W/80-4000 r/min 4 programmable speeds Digital setting/display Easy handling Load factor display Up to IP67 Rated power: 30 - 300 W Speed range with gear: 0.067 ...

Power: 30 W - 300 W
Torque: 0.2 Nm - 583 Nm
Rotational speed: 80 rpm - 4,000 rpm

Brushless DC Motor Features 30-300 W/80-4000 r/min 16 programmable speeds Digital setting/display Vertical movement possible Load factor display Torque limitation Up to IP67 Rated power: 30 - 300 W Speed with gearbox: ...

Gear ratio: 5 unit - 200 unit

Brushless DC motor with driver for 24 VDC Features Motor protection class up to IP65 Compact driver board High speed stability Energy-saving High torque at low speeds Torque limitation Rated power: 15 - 100 W Speed range ...

Power: 750, 200, 400, 100 W
Intensity: 2.4, 3.8, 1.3, 1.4 A
Torque: 1.27, 0.64, 2.39, 0.32 Nm

Particularly low-cost and compact AC synchronous servo motor for simple positioning tasks. • Basic series - for cost-sensitive, simple positioning tasks • A selection of 3 motor sizes in up to 2 lengths • Brushless, permanently magnetized ...

Power: 0.35 kW - 12 kW
Torque: 0.6 Nm - 93 Nm
Rotational speed: 2,700 rpm - 7,100 rpm

The servo motor EMMT-AS for demanding and dynamic applications is characterized by very good controllability and path accuracy for positioning tasks and the space-saving single-cable solution significantly reduces installation effort. • ...

Power: 500 W
Intensity: 9.5, 1.4, 5, 1.8 A
Torque: 0.3 Nm - 6.5 Nm

For simple positioning applications with reduced requirements: the long-life stepper motor series with two-phase hybrid technology. • Small increments and high driving torques thanks to 2-phase hybrid technology • Optimised connection ...

Intensity: 0.05 A
Rotational speed: 8,520 rpm
Operating temperature: -40 °C - 100 °C

The brushless ECX FLAT motor series is optimized for high torques. Innovative winding technology and high-performance magnets give the ECX FLAT a unique ratio of torque to size, making it ideal for applications involving confined spaces.

Power: 105 W
Intensity: 256 mA - 4,860 mA
Torque: 0.0982 Nm

The EC frameless DT motors are BLDC motor kits with internal-rotor technology. The rotor and stator are delivered separately, without bearings or motor shaft, and are connected only during assembly. The flat design, the high torques, ...

Power: 100 W
Intensity: 141 mA - 4,700 mA
Torque: 0.185 Nm

The EC frameless DT motors are BLDC motor kits with internal-rotor technology. The rotor and stator are delivered separately, without bearings or motor shaft, and are connected only during assembly. The flat design, the high torques, ...

Power: 9, 2, 1, 19 W
Intensity: 0.3, 0.4, 0.9, 1.8 A
Torque: 0.007, 0.0068, 0.0067 Nm

The 16ECP36 2A motor has been developed to be one of the most advanced and highest performing brushless slotless motors in its class. Featuring integrated electronics, the 16ECP36 2A Ultra ECP motor helps reduce application size by eliminating ...

Power: 27.5 W
Intensity: 2.1, 0.9, 0.4, 0.3 A
Torque: 0.0072, 0.0071, 0.007, 0.0075 Nm

Downsize and optimize your application with a brushless slotless DC motor that also runs up to 25W continuous power at 60,000 rpm. Motor Highlights > Optimized and flexible mechanical design - allows 16ECP to adapt to any appplication > ...

Power: 19.3, 7.3, 2.1 W
Intensity: 0.72, 0.39, 1.7 A
Torque: 0.0134, 0.0139 Nm

The 16ECP52 2A motor has been developed to be one of the most advanced and highest performing brushless slotless motors in its class. The 16ECP52 2A motor is a plug and play motor which is directly connected to the customer application ...

For reliable performance in reduced size: The Bosch compact geared motors are the appropriate solution for industrial applications with limited space. These drives exhibit high power density and cover a broad field of 12 and 24V requirements. ...

For reliable performance in reduced size: The Bosch compact geared motors are the appropriate solution for industrial applications with limited space. These drives exhibit high power density and cover a broad field of 12 and 24V requirements. ...

Gear ratio: 73 unit

For reliable performance in reduced size: The Bosch compact geared motors are the appropriate solution for industrial applications with limited space. These drives exhibit high power density and cover a broad field of 12 and 24V requirements. ...

Power: 0 W - 8.5 W
Torque: 0.0006 Nm - 0.01 Nm
Rotational speed: 7,400 rpm - 14,600 rpm

DC-Micromotors with precious metal commutation These ironless DC motors are the most compact in the industry today and most types feature integrated high resolution encoders for use in highly precise positioning and speed control applications. The ...

Power: 0 W - 4 W
Torque: 0.0004 Nm - 0.003 Nm
Rotational speed: 5,900 rpm - 15,500 rpm

Flat DC-Micromotors and DC-Gearmotors Precious-metal commutated DC-Micromotors with uniquely flat coil technology with three flat, self-supporting copper windings used in the SR-Flat series form the basis for drive systems in applications ...

Power: 0 W - 282 W
Torque: 0.0137 Nm
Rotational speed: 44,300 rpm

The original FAULHABER brushless DC servomotors. These ironless slotless motors are built for use in highly challenging areas of application and environmental conditions from the vacuum of space to medical device technology. They are ...

• Extremely high system efficiency • Compact wash-down design • Maintenance reduction • System solution for simple commissioning and plug & play DuoDrive is a revolutionary integrated gear unit/motor concept in hygienic wash-down ...

Gear ratio: 1.35 unit - 14,340.31 unit

Functionality with tradition NORD Helical Gear Units have been produced according to the tried and tested UNICASE principle since the 1980s and are characterised by low maintenance and a long service life Version • Solid shaft gear units • ...

Gear ratio: 1.07 unit - 456.77 unit

The NORDBLOC.1 Helical Gear Unit with its smooth surface is an innovative drive solution for all applications where cleanliness is essential. These innovative and patented gear units do not have any installation openings. This increases ...

Torque: 9 Nm - 63 Nm
Power: 138 W - 1,300 W
Load: 500, 250 kg

All functional elements in one compact system Framo Morat has developed a highly integrated wheel hub drive that combines all functional elements, such as the wheel, a high-precision planetary gear, a powerful electric motor and a brake ...

Gear ratio: 27 unit - 100 unit
Operating temperature: 0 °C - 40 °C

3-phase AC motor Terminal box Hollow shaft stainless steel Thermal protection IP 54 The Compacta MR6 slip-on geared motor offers an output speed of 6 to 80 min-1 and a nominal torque of up to 60 Nm in the preconfigured standard versions. ...

Gear ratio: 14.2 unit - 225 unit
Operating temperature: 0 °C - 40 °C

3-phase AC motor Terminal box Thermal protection IP 54 Plastic 1st gear stage The Compacta MS12 slip-on geared motor offers an output speed of 4.5 to 137.5 min-1 and a nominal torque of up to 142 Nm in the preconfigured standard ...

Remote expansion module for the sigmaPAC family of programmable controllers It allows to expand the resources available on nP4 and AC3nP, providing additional inputs and outputs: Inputs: – 0/4 High level analogue: Configurable ...

It allows to expand the resources available on nP4 and AC3nP, providing additional inputs and outputs: Inputs: – 0/4/8 Universal analogue: Configurable 0/1 … 5 V, 0/2 … 10 V, 0/4 … 20 mA, TC (J, K, L, N, R, S, T), PT100 ( 2 wires), ...

Provides additional safety outputs for a primary safety device Offers four normally open (NO) safety outputs Provides delayed or immediate outputs, depending on model Offers choice of 24V dc or 24V ac/dc supply voltage, ...

Power: 0.22 kW - 10.76 kW
Torque: 0.64 Nm - 85 Nm
Rotational speed: 6,000, 4,000, 3,000, 2,000 rpm

High Dynamic AC Brushless Servo Motor Unimotor hd is a high dynamic brushless AC servo motor range designed for use in pulse duty applications where rapid acceleration and deceleration are required. The motors are available in frame ...

Torque: 0.19 Nm - 60 Nm
Rotational speed: 0 rpm - 7,500 rpm

Available in 40-170mm frame sizes, SMB motors use innovative salient pole technology to achieve low rotor inertias and high dynamic performance. SMB motors have resolver feedback. Product Overview The SMB series brushless servo motors ...

Power: 0.2 kW - 13.7 kW
Torque: 0.45 Nm - 83 Nm
Rotational speed: 0 rpm - 9,800 rpm

Available in 42-155mm frame sizes, NX motors are designed to provide low cogging torque and smooth operation. A large set of torque/speed characteristics, options and customization possibilities are available, as well as CE and UL marking ...

Torque: 1.6 Nm - 35 Nm
Rotational speed: 1,100 rpm - 7,600 rpm

Available in 70-155mm frame sizes, EX motors feature an explosion-proof housing, making them suitable for use in explosive atmospheres. Two versions are available conforming with either North American (UL/cUL) or European (CE) safety ...

Expander module for contact expansion 4 safety contacts, STOP 0 1 Signalling output

Expander module for contact expansion 4 safety contacts, STOP 0 2 Signalling outputs

Operating temperature: 5 °C - 45 °C

TiMOTION’s TGM1 series gear motor was designed primarily for ergonomic applications like height adjustable workstations and tables, but can be used in many other applications. This economical product allows for fast, smooth and quiet ...

The TGM2 series is TiMOTION’s most powerful gear motor. It was designed primarily for ergonomic applications like height adjustable workstations and tables, but can be used in many other applications. This economical product allows for ...

Operating temperature: 5 °C - 45 °C

The TGM3 series is TiMOTION's compact size gear motor. It was designed primarily for ergonomic applications like height adjustable workstations and tables, but can be used in many other applications. This economical product allows for ...

Expansion module of the modular safety relay myPNOZ, inputs: 6 for monitoring of 2-hand monitoring Type IIIC to EN 574 and another safety function (1/2-channel wiring with/without detection of shorts across contacts) AND-linked, width: ...

Expansion module of the modular safety relay myPNOZ, outputs: 3 n/o safe delay-on de-energisation switching relay contacts (t=0-300s), 1 signal output in semiconductor technology, inputs: 2 for monitoring 1 safety function: 1/2-channel ...

Expansion module of the modular safety relay myPNOZ, outputs: 2 safe instantaneous switching semiconductor outputs, 1 signal output in semiconductor technology, width: 17.5mm General data Approval - CE CCC UKCA cULus Listed ...

Power: 50 W - 750 W

24-bit high-resolution encoder installed High efficiency, low heat generation Downsizing by up to 20% Flange compatible with Sigma-5 Medium inertia, high speed

Power: 50 W - 7,000 W

24-bit high-resolution encoder installed High efficiency, low heat generation Downsizing by up to 20% Flange compatible with Sigma-5 Low inertia, high speed

Power: 450 W - 2,900 W

24-bit high-resolution encoder installed High efficiency, low heat generation Downsizing by up to 20% Flange compatible with Sigma-5 Medium inertia, low speed, high torque