Other acoustic and optical measurement equipment

API’s break resistant Spherically Mounted Retroreflectors (SMR) are constructed with a one piece optic eliminating risks associated with glass panels shifting, separating or fracturing and can track over 80m with optical centering accuracy ...

Valve Rotation Monitoring for reciprocating Diesel/HFO/Gas (Bio, NG) Engines. In conventional engine system all sensors are connected to outer parts of the engine components and coupled with cables for power and signalization. It was ...

Frequency: 2 Hz - 500 Hz

• 2 AXIS VIBRATION SENSORS • Average value output • Cable output General Features: These sensors give an analog signal proportional to the vibrations on both the X and Y axis. Since the measurement is made from a very low frequency, ...

3 AXES VIBRATION AND SHOCK SENSOR • 4÷20 mA Output • M12x1 connector output • General features: These new accelerometers give a single 4 ÷ 20 mA signal proportional to the vibrations applied to X, Y and Z axes. Since the measurement ...

New generation of optical fiber based sensor system for the maintenance and monitoring of infrastructures The patented technology uses state of the art optical physics to measure temperature, strain and vibrations of a structure or soil ...

Portable Digital Radiography Systems with high resolution “Genius” system NOVO DR portable digital radiography systems for NDT applications provides a complete solution for grabbing x-ray images in the most demanding environments. ...

The HydroBoat 1500 is a highly versatile bathymetric survey and monitoring platform that can carry a multi-beam echo sounder. It is designed to measure underwater topography in lakes, rivers, and reservoirs. The combination of the HydroBoat1500 ...

Frequency: 0.5 Hz - 15 Hz

AccTRANS 110V5 A micro-electromechanical spring-mass-system is continuously measuring the acceleration and transforms the measured data into an analog 4-20mA output signal. The sensor complies with the standards of DIN EN 50155 for railway ...

Frequency: 0.5 Hz - 15 Hz

AccTRANS 110V4 A micro-electromechanical spring-mass-system is continuously measuring the acceleration and transforms the measured data into an analog 4-20mA output signal. The sensor complies with the standards of DIN EN 50155 for railway ...

Frequency: 0.5 Hz - 15 Hz

AccTRANS 24V2 A micro-electromechanical spring-mass-system is continuously measuring the acceleration and transforms the measured data into an analog 4-20mA output signal. The sensor complies with the standards of DIN EN 50155 for railway ...

IE-NODE New Product Remote Sensor Monitoring for PLC's & Automation Systems ETH-NODE1V46CAI, ETH-NODE1V4CAI, ETH-NODE2V46CAI, ETH-NODE2V4CAI The Industrial Ethernet Node (IE-NODE) is a remote monitoring interface designed to provide ...

VIBMIL is a vibration sensor designed for continuous monitoring of vibration levels in industrial environments. It is current loop powered accelerometer and delivers accurate vibration RMS velocity using a 4-20 mA output. Built with a ...

In the standard IEPE version, each vibration channel operates within 2 simultaneously running frequency bands. The bands are configurable from 0.7 Hz up to 11.5 kHz and will typically monitor the 10-1000 Hz area (ISO 10816-3), as well ...

The PCH 1072 is a vibration monitor manufactured by PCH Engineering. It is suitable for use in various rotating machine applications. The standard version features 1 channel, with a frequency range of 0.5Hz to 1kHz. The unit si equipped ...

The PCH 1073 is a continuous vibration monitoring system, manufactured by PCH Engineering A/S. This product is applicable in the surveillance of vibration levels in machinery, and detecting unbalanced bearings, and other bearing faults. ...

Final testing bench for brushless servomotors Compact testing system for the final testing of fully assembled motors. Aim of the final testing bench was to enable the customer to test different motor sizes and output classes. The ...

Color light box can accommodate up to 4 light sources. The consistency of the light sources in all Lab-kits Color Matching Cabinet gives excellent viewing conditions for reliable colour critical decisions under consistent lighting. Color ...

It is a new portable spectrocolorimeter with Lab-kits own core research and development technology. It is the high-level colorimeter in spectral architecture. In addition to ensure accurate relative ΔE at the same time, it is also to ...

Technical Parameters Measuring area: 2mm*2mm Measuring mode: 2-wavelength concentration difference of optical methods Sensors: Silicon semiconductor photodiode Display mode: measuring value: 3 digits liquid crystal display measuring ...

Digital Chlorophyll Sensor ZWIN-CHL1006 PRODUCT INTRODUCTION The working principle of this sensor is to use the characteristics of chlorophyll in the spectrum. By emitting light of a specific wavelength to iluminate the water body, ...

Frequency: 4 Hz - 1,000 Hz

• Also available as Spike Version (see pictures) • Natural frequency: 8Hz • Sensitivity: 28.8 V/m/s • Accuracy: +/-5% • Typical spurious frequency: 160Hz • Coil impedance: 375 Ohm • Dimensions (D/H):25.4x36mm • Weight: 82g • Connector: ...

Temperature: 0 °C - 40 °C

SCAL2 Handheld AE Calibrator are designed and developed for the requirements of acoustic emission detector calibration. It can export various standard parametric signals like amplitude, rise time, counts and duration. SCAL2 is suitable ...

3-AXIS SHOCK & VIBRATION SMART PROBE Recovib Feel 2/6G PROPERTIES 3 axis accelerometer DC to 250 Hz useful bandwidth Low noise Compact and rugged design Protection grade IP67 POSSIBLE USE “Quick & dirty” vibration monitoring Real-time ...

The Recovib.Monitor devices are industrial grade multi-purpose acquisition and monitoring systems. They provide a full embedded solution for connecting up to eight sensors (current loop, IEPE, single-ended/differential voltage) to a hardware ...

Frequency: 250 Hz

FEEL USB Accelerometer RECOVIB Feel has been designed for performing an immediate vibratory analysis. It is connected to an Android device or tablet PC via a USB connection. The supplied application enables the streaming of real-time ...

Electro-dynamic velocity sensor Plus: The TransducerT1-40 must not be powered and it is free of maintenance” Output signal speed ( mm / s RMS ) without conversion Excellent signal/noise ratio Continuous reliability The transducer ...

Frequency: 1.5 Hz - 12,000 Hz

Velomitor seismic transducer GENERAL DESCRIPTION TV-22 and TV-32 transducers seismically measure absolute vibration by a direct installation on the supports of the vibrating part and supplies an output signal directly proportional ...

TDSP Protection system for rotating equipment with SIL3 requirements The Overspeed SIL3 protection module is a stand-alone rack which provides a highly reliable and redundant tachometer system specifically uses as part of an overspeed ...

Frequency: 1 Hz - 80,000 Hz

The 1/2“ measurement microphone pre-amplifier type MV 240 digital combines a high-impedance transducer with an analog-to-digital converter. The output signal of the measurement microphone capsule is optimally adjusted to the dynamic ...

Voltage: 28 V - 130 V
Frequency: 1 Hz - 1,000,000 Hz

1/2" Measuring Microphone Preamplifier - climate proof, because of controlled heating The 1/2” measuring microphone preamplifier type MV 205 is a high-impedance transducer for 1/2" condenser measuring microphone capsules used in weatherproofed ...

The 1/4" M 380 electret measuring microphone has a free-field equalized frequency response of the transmission ratio as well as optimized noise characteristics and is designed in particular for acoustic measurements in the free sound ...

Each ELCOMAT® direct N consists of the autocollimation sensor and the software ELCOdirect. ELCOdirect can be used with Microsoft® Windows and a current PC, laptop or notebook. The autocollimation sensor is connected to the computer via ...

With the direct signal digitization in the sensor head, the high user-friendliness and extended functions of the display unit 5000 the ELCOMAT® vario N sets a new standard in the ELCOMAT® product line. Like its predecessor ELCOMAT® vario ...

In direct comparison to its predecessor ELCOMAT® 3000, the ELCOMAT® 5000 features a 10-fold higher measuring frequency in addition to a larger measuring range and a better signal-to-noise ratio due to direct signal processing in the measuring ...

Our airborne sound sensor dsound® USS4-LS is an intelligent sound sensor with a self developed algorith for signal processing and is used for autonomous detection, evaluation and recording of airborne sound in an industrial environment. ...

The dsound® USS5-LS airborne sound sensor is a universal sound sensor with RMS and peak value control and is used for frequency-selective level monitoring of airborne sound in industrial environments. The areas of application are machine, ...

Our airborne sound sensor dsound® USS4-LS-E is an intelligent sound sensor with a self developed algorith for signal processing and is used for autonomous detection, evaluation and recording of airborne sound in an industrial environment. ...

The Ultra Dual Axis Autocollimator gives high accuracy measurement of angle, straightness, flatness, squareness and parallelism. This digital autocollimator is controlled using a tablet PC with clear touch-screen software, using the latest ...

A high precision version of the above Ultra Autocollimator, ideal for ultra-precision measurements and indexing of small angles. One of the most precise autocollimators on the market, the Ultra High Precision Autocollimator is commonly ...

Angle, Straightness, Squareness, Parallelism Measurement Using Visual Autocollimator The TA51 visual autocollimator has a wide range yet maintains a high measurement accuracy, this system is popular in the measurement and calibration ...

The optical contact angle meters of the OCA series are high-precision measuring systems for the characterisation of interfaces and surfaces. They combine high-resolution optics, pinpoint liquid dosing and precise sample positioning to ...

The MultiScan MS 20 stability analysis system is a compact and versatile measuring instrument for the optical stability and ageing analysis of disperse multiphase mixtures, especially suspensions and emulsions. The MultiScan MS 20 ...

Vibration tester is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. It ...

Application: The BELTRON UV-Integrators are used for registering of uv energy in uv-curers, uv-dryers, uv-exposure units, printing plate exposure systems, and other graphic machines. By testing the uv energy and modification of the production ...

Application: The BELTRON UV Integrators are used for registering of uv energy in uv curers, uv dryers, uv exposure units, printing plate exposure systems, and other graphic machines. By testing the uv energy and modification of the production ...

General: The Beltron LED UV Integrator is a high-quality measuring device for determining the UV dose. On the back of the device a UV sensor is located, which detects the LED / UV radiation. The LCD display directly reflects the measured ...