Other production machines

Folding length: 1,270 mm

The folding machines of the SBS series are used for bending thin sheets. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle ...

Folding length: 1,020 mm

The folding machines of the SBS series are used for bending thin sheets. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle ...

Folding length: 2,020 mm

The manual folding machines of the SBS E-series with their heavy and robust design are designed for bending long metal sheets of up to 3000 mm (118 in.) in length. Due to its angle stop, this series can also be used for the production ...

Bosch Condensate service module CSM - Secure use of condensate in steam boiler systems - Decreases in energy and water consumption due to reduced quantities of make-up water - Minimisation of flash steam losses, desalting and blowdown ...

Bosch Blow-down, expansion and cooling module BEM - Blow-down, expansion and cooling module for cooling blow-down water to the permissible temperature - Fast and easy assembly, requires just a small number of connections before the ...

Bosch Expansion, heat recovery and blow-down module EHB - For the cooling of blow-down water and the recovery of heat from desalinated water/condensate - Increase in system efficiency of up to 2% - Reductions in fuel, cooling water ...

Meltblown Non-woven Fabric is mainly made of polypropylene, and the fiber diameter can reach 1 ~ 5 microns. There are many voids, fluffy structure, and good anti-wrinkle ability. These ultrafine fibers with unique capillary structure ...

The machine is used to produce nonwoven fabrics for clothing, medical and sanitary materials, construction, industry, agriculture, disposable products for hotels and other nonwoven and industrial fabrics, etc.

The machine is used to produce nonwoven fabrics for medical isolation clothing, surgical clothing, sheets curtain, sanitary napkins, baby diapers, adult incontinence pad (pants) and other disposable medical protection and personal health ...

SPIROL’s Model HA Automatic Heat Insert Driver provides an accurate and consistent installation method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic materials. Considering that as much as 75% of the ...

SPIROL’s Model HM Manual Heat Insert Driver provides a cost-effective method of achieving high quality installation of Threaded Inserts into plastic assemblies. To operate the machine, the operator manually places the Insert in the entrance ...

The SPIROL Model PH Heat Insert Driver provides an accurate and consistent method to simultaneously install multiple Threaded Inserts or Compression Limiters at multiple elevations. Simultaneous installation dramatically increases productivity ...

VFT-orbit-2 is the world’s fastest, most robust and easiest to service lens generator. This free form lens generator raises the bar that Satisloh’s flagship VFT-orbit set. The fully automated lens surfacing machine features exceptional ...

VFT-orbit-2E is an economical entry into automated Rx lens generating for mid volume production. In addition, the surfacing machine is available as automated or manual. Economically priced free form lens generator VFT-orbit-2E is ...

VFT-macro is a manual, Rx free form lens generator for low to mid volume production. It features VFT technology and auto-calibration. Digital Rx lens production for low to mid volume operations The manual compact Rx lens generator ...

BioFlo Pro fermentors are modular systems designed for quick delivery, dependable operation, and system flexibility, all at an affordable price. BioFlo Pro systems utilize industry-standard components for dependable operation, and an ...

The Mikron TR-42 wire shearing machine is a versatile and reliable high-productivity machine. It is specifically designed for fast and precise straightening and shearing of wire material. Its high-speed and precision cutting, user-friendly ...

The wire cutting machine Mikron TF-120 is a highly efficient pre-processing solution for straightening and sawing wire material. It is specially designed for the production of prefabricated small blanks to achieve a higher output rate ...

The Mikron TR-42 wire shearing machine is a versatile and reliable high-productivity machine. It is specifically designed for fast and precise straightening and shearing of wire material. Its high-speed and precision cutting, user-friendly ...

AKYAPAK APSM machine is designed as standard to fix sheet metal thicknesses from 3 mm to 60 mm and widths from 500 mm to 3000 mm. According to customer needs, it can be manufactured with 5, 7, or 9 balls. Number of balls is not related ...

Flare Gas Recovery Systems (FGRS) are specialised compression packages which aim to recover and repurpose the gass, and this is how it works: A Floating Production Storage and Offloading (FPSO) facilitates the processing and storage ...

The M1011 Manual embossing machine is a product assembled by Lapp Group, that features good chemical and heat resistance. This machine provides suppression against cold temperature, acid, oil and gas applications. Moreover, this ...

The C 140 is particularly suitable for small and medium-sized plants whose required throughput rate does not exceed 50-80 kg/h or 200 to 400 kg/day. Virtually any suitable material can be briquetted, such as wood, polystyrene, foams, ...

The C 150 is particularly suitable for small and medium-sized plants whose required throughput rate does not exceed 50-80 kg/h or 200 to 400 kg/day. Virtually any suitable material can be briquetted, such as wood, polystyrene, foams, ...

The C 160 is particularly suitable for small and medium-sized plants whose required throughput rate does not exceed 50-80 kg/h or 200 to 400 kg/day. Virtually any suitable material can be briquetted, such as wood, polystyrene, foams, ...

To promote the global industry's necessity to shift from acetate filters to eco-friendly alternatives, we partner with our customers in research and development to ensure your products remain consistent. Together we implement change for ...

Since the development of the filter cigarette in the middle of the last century, there has been no upheaval that has changed the industry in terms of its products, processes and production as profoundly as Tobacco Heating Products (THP). ...

PROTOS cigarette makers are a synonym for state-of-the-art engineering and set the global benchmark with their pioneering technology. Cigarette makers form tobacco into a long rod, wrap it in paper, and glue the seam. Knives cut this ...

We supply machine to produce the HDPE/PP KRAH spiral wound profile pipe and fittings, manhole from DN/ID300mm to DN/ID 4500mm. The main applications for the krah profile wall wound pipe products are non-pressure applications like drain, ...

We have more than 12 years’ experience to supply krah pipes winding tooling—mandrel to produce krah pipe. We can manufacture the mandrel from OD200 to OD5000mm, length from 3 meters to 10meters. Our mandrel can work with Krah machine, ...

PP-HM Spiral Profile Wound Pipe Machine PP-HM Spiral Profile Wound Pipes is of high ring stiffness and lower weight compared to HDPE. PP spiral pipe systems with various stiffness classes which are designed for utility ...

Optimize your AM powder recovery process The Russell AMPro®Lab Sieve Station is a highly flexible system, best suited for reclaiming small-batches of additive manufacturing (AM) powders. Compatible with a wide range of bottle sizes, ...

A lightweight and portable powder recovery station for entry-level users, and those using powder vessels and bottles The Russell AMPro® Lite is the ideal sieve station for entry level users, or for those using powder vessels or bottles. ...

Specifically designed to suit the EBM printing process, with a fully automated high capacity solution to recover unused powders. Electron beam melting is an additive manufacturing method, whereby metal powders are melted, layer by ...

Gas recovery : < 2 mbar Filling of gas : 0 - 10 bar Evacuation of air : < 2 mbar Maximum storage pressure : 50 bar Recommended gas quantity : < 5 kg Operation : automatic DILO couplings : DN8 Standard version • oil-free DILO ...

The compact service unit has been specially designed for very small SF6 gas quantities and is perfectly suited for applications such as SF6 gas handling on medical devices, electron microscopes or in research centres. The small and ...

Everything in a single source For the production of small quantities (insular production) we offer high performance stand alone units. Example: Stand-alone unit with integrated gas monitoring system for venting, evacuation of ...

Folding length: 2,500 mm

The second-generation RAS MiniBendCenter represents a revolutionary advance in production technology for small bent parts. As the world's first fully automatic folding center, it enables the seamless, automated processing of sheet metal: ...

Folding length: 2,160, 2,560, 3,060 mm

If you want to bend precision parts, fully automatically, at high speeds, in high quantity, regardless of batch-size, with the highest levels of flexibility and total repeatability, welcome to the next level of metal fabrication. Folding ...

Folding length: 2,160 mm - 3,060 mm

Entry into automatic bending Are you looking for a cost-effective entry-level solution for automatic bending of panels and boxes? At the same time you want to use all features of a high-end panel bender RAS has an attractive solution ...

1. Advanced Corrugated Pipe Machine&Technology (1)Higher Pipe Quality • Mould block temperature control system optimizes the pipe quality both appearance and inside • Stable vacuum molding technology and double-layer socket technique ...

1. Advanced Corrugated Pipe Machine&Technology (1)Higher Pipe Quality • Mould block temperature control system optimizes the pipe quality both appearance and inside • Stable vacuum molding technology and double-layer socket technique ...

1. Technical Advantage (1) Automatic feeder with Alarming on lacking of material. (2) Harden treated screw and barrels for longer life span and durability. (3) The complete extrusion line runs full-automatically. (4) Pressure ...

Is there a infinitely adjustable workstation that is also mobile? The answer is definitely 'yes'. With the AMTE 250 from ALFRA, you can adjust the angle of inclination of your mounting table to your individual favourite working position ...

What does the perfect workplace for control cabinet builders look like? The AMT from Alfra provides the answer: Equip control cabinets ergonomically and exactly in the position that is best suited to you. The angle of inclination, which ...

Description DKW-30TD is an automatic production line designed by our company for the production of five-layer chemical barrels. It is also the first automatic production line for 20L~30L five-layer barrels in China, which also can produce ...

Low cost "entry level" press Facility for a direct link to machining centres Fits under nearly all chip chutes Also suitable as standalone Custom hopper geometry Heavy duty castors for mobile applications Optional discharge chute ...

Perfect for smaller amounts of chips Short amortisation period Fully automatic 24h operation possible Long service life Low maintenance costs Recovery of expensive cooling lubricants BRIQUETTING METAL CHIPS AND INCREASING THEIR ...

For small to medium quantities of metal chips Short amortisation period Recovery of cooling lubricants Fully automatic 24h operation possible Long service life & low maintenance requirements Unsere Our RUF 4-11 metal press series ...

Our fixed Mechanical Plant plants work 400-500 tons / hour capacity. Our high engineered products with stable mechanical plant facilities have been the focus of attention of our many customers with ergonomic design and low cost. Fixed ...

Our Mobile Mechanical Plant plants work 300-400 tons / hour capacity. Our high engineered products with mobile mechanical plant facilities have been the focus of attention of our many customers with ergonomic design and low cost. Mobile ...

Machine used for the compression of metallic chip removed through metalworking operations Several benefits, such as: – Machining operation with automatic cycle (no manpower for chip handling) – Recovery of plant areas – Re-use of ...

Optimize your metal chip waste management with Mackma’s BTT Series, featuring high-efficiency briquetting machines designed to compact metal chips at pressures up to 1000 kg/cm². These machines offer a compact design, advanced liquid ...

Optimize your metal chip waste management with Mackma’s BTT Series, featuring high-efficiency briquetting machines designed to compact metal chips at pressures up to 1000 kg/cm². These machines offer a compact design, advanced liquid ...

Modular production lines for the continuous and efficient manufacture of high-quality slabstock foams For almost eight decades Hennecke has developed and produced high-quality plants for polyurethane processing. Hennecke is considered ...

Production lines for the continuous manufacture of high-quality polyether and polyester-based slabstock foams The results of over 60 years of research and development are reflected in Hennecke’s QUADROFOAMAT (QFM) slabstock lines. ...

Ultra-compact systems for continuous production of high-quality slabstock foams Before the introduction of the JFLEX series, the capacity range between discontinuous and continuous slabstock systems was not covered in the market for ...