Technical gas production equipment

Flow rate: 2 m³/h - 148 m³/h
Output pressure: 5.5 bar - 11 bar

Advanced technology nitrogen gas generator for industry leading performance; a source of increased productivity, sustainability and profitability. NITROSource provides nitrogen gas of 95% to 99,9995% equivalent nitrogen purity. The ...

Flow rate: 0 l/min - 228 l/min
Output pressure: 7 bar - 10 bar

Parker domnick hunter nitrogen gas generators employ robust, field proven technology to produce ultra high purity nitrogen for critical life science, chemical analysis and spectroscopy applications. Flow rates range from 0.75 L/min to ...

Output pressure: 1 bar - 2 bar

PSA SYSTEMS PACKAGES Pressure Swing Adsorption (PSA) is a technology utilized in air separation to enable the creation of a continuous stream of nitrogen by means of air filtration. Ingersoll Rand nitrogen generators use PSA technology ...

Filling of gas : 0 - 10 bar DILO couplings : DN8/DN20 Operation : manual Standard version • pressure reducer for SF6 • SF6 cylinder connection W 21.8 x 1/14" • primary gauge NG63, class 1.6, 0 - 60 bar • secondary gauge NG100, ...

Portable in a tansport case with rubber hose, DILO-couplings DN8 and DN20, pressure range 0 up to 10 bar • pressure reducer for SF6 • SF6 cylinder connection W 21.8 x 1/14" • primary gauge NG63, class 2,5, 0 - 60 bar • secondary ...

Portable in a transport case with wire-braided hose, couplings DN8 and DN20, pressure range 0 up to 10 bar • pressure reducer for SF6 • SF6 cylinder connection W 21.8 x 1/14" • primary gauge NG63, class 2,5, 0 - 60 bar • secondary ...

Flow rate: 1.2 l/min
Output pressure: 10 bar
Gas purity: 99.9999 %

MARS BOX generators use PEM technology (membranea proton exchange) to produce ultra-pure hydrogen underpressure desired without the need to resort to externalpurification or compression systems.Powered simply by current electric and double ...

Flow rate: 1.2 l/min
Output pressure: 10 bar
Gas purity: 99.99 %

MARS BOX generators use PEM technology (membranea proton exchange) to produce ultra-pure hydrogen underpressure desired without the need to resort to externalpurification or compression systems.Powered simply by current electric and double ...

Flow rate: 2.4 l/min
Output pressure: 10 bar
Gas purity: 99.99 %

MARS BOX generators use PEM technology (membranea proton exchange) to produce ultra-pure hydrogen underpressure desired without the need to resort to externalpurification or compression systems.Powered simply by current electric and double ...

Flow rate: 20 l/min
Output pressure: 16 bar
Gas purity: 99.99 %

The HydroGen series HG PRO M can generate up to 20 L/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO M includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) ...

Flow rate: 18 l/min - 36 l/min
Output pressure: 8 bar

The NitroGen series NG CASTORE XS iQ are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 36l/min with a purity up to 99.9%. This NG series is equipped ...

Flow rate: 20, 40, 60 m³/h
Output pressure: 10 bar

The NitroGen series NGA CASTORE XL iQ are the last innovation of LNI Swissgas. Very silent membrane Nitrogen and dry air Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up ...

Flow rate: 10.7 m³/h - 1,250 m³/h
Gas purity: 95 % - 99.99 %

The IMT PN series enables the generation of ultrapure nitrogen (6.0) at low cost and with full control of all operating values. The novel PN technology developed by INMATEC increases the efficiency of the PSA technology used thanks to ...

Flow rate: 7.5 m³/h - 387 m³/h
Output pressure: 7 bar
Gas purity: 90 % - 95 %

Oxygen from 7,50 Nm³/h - 387,00 Nm³/h Oxygen purity up to 95% IMT PO: ENERGY-SAVING OXYGEN GENERATION AND SEAMLESS INTEGRATION The IMT PO series offers the highest level of energy efficiency thanks to innovative technology. Furthermore, ...

Flow rate: 0.5 m³/h - 8.9 m³/h
Output pressure: 7 bar
Gas purity: 90 % - 95 %

Oxygen from 0,50 Nm³/h - 8,90 Nm³/h Oxygen purity up to 95% IMT PO ONGO: STRONG NEWCOMER TO THE OXYGEN WORLD With the product line IMT PO OnGo, INMATEC offers economic entity models for the universal on-site generation of oxygen. Particular ...

Flow rate: 0.1 l/min
Output pressure: 100 psi
Gas purity: 99.9995 %

The smallest hydrogen generator for GC-FID, Precision hydrogen SL has been developed to offer a streamlined laboratory-grade hydrogen gas solution for GC flame detectors at a purity of 99.9995%. Precision hydrogen SL is safe, simple to ...

Flow rate: 24 l/min
Output pressure: 8 bar
Gas purity: 99.9 %

Bringing Single Quad LC-MS users the very latest in nitrogen gas generator technology, Horizen 24 is the culmination of over 25 years at the forefront of nitrogen gas generation for the lab from Peak Scientific. Designed to provide ...

Flow rate: 35 l/min
Output pressure: 116 psi
Gas purity: 95 % - 99.5 %

Inspired by the success of our best-selling Genius line of nitrogen gas generators for LC-MS, Genius XE Nitrogen is a cutting-edge evolution combining advanced technology with refined and robust engineering. With two models - XE 35 (up ...

Flow rate: 40 ft³/h - 40,000 ft³/h
Output pressure: 20 psi - 3,000 psi
Gas purity: 95 % - 99.9995 %

Nitrogen is an extremely important variable when designing the space you will utilize to do your heat treating. The purest possible nitrogen is important when you are doing a heat treatment of any kind of metal, regardless of the technique ...

Gas purity: 95 % - 99.9995 %

Nitrogen Generators are used in aluminum degassing as a process gas to remove the hydrogen from the molten aluminum. Hydrogen gas is removed by sparging or bubbling the nitrogen gas through the liquid aluminum. The Nitrogen draws the ...

Gas purity: 95 % - 99.9995 %

Nitrogen Generators for Aluminum Extrusions are used to reduce or prevent oxide that would form on the surface of the dies used for the extrusion. By preventing the formation of oxide on the dies you increase the life of the die. This ...

Flow rate: 1 m³/h - 150 m³/h
Output pressure: 10 bar
Gas purity: 92, 94, 95, 93 %

During health emergencies, a reliable source of medical-grade oxygen is essential. One innovative solution that stands out is the Pressure Swing Adsorption (PSA) Oxygen Generator. This cutting-edge technology ensures on-site O2 production, ...

Output pressure: 10 bar
Gas purity: 97 % - 99.999 %

At BERG GaseTech GmbH, we specialize in providing advanced PSA Nitrogen Generators for efficient on-site nitrogen gas production. Our nitrogen gas generators utilize innovative Pressure Swing Adsorption (PSA) technology to ensure a ...

Flow rate: 1.4 m³/h - 1,057.7 m³/h
Gas purity: 97 % - 99.999 %

Nitrogen Generators PSA High-performance nitrogen production for a wide range of applications Our PSA N2 Generators can produce the purity of 97% to 99.999% with the Capacity of 1.4 - 1600 Nm3/h BERG KOMPRESSOREN GmbH and BERG GaseTech ...

Product introduction: The cylindrical cell helium filling equipment is a specially designed device, which is used to inject helium gas into the cylindrical cells. It has multiple characteristics, including the ability to precisely ...

Product Introduction: The SF6 gas recovery unit is an integrated recovery device that comprises a vacuum pumping system, a compression system, a purification system, a storage system, and a condensing system. The SF6 gas recovery, ...

Flow rate: 0.1 l/min - 1.4 l/min
Output pressure: 1 bar - 11 bar
Gas purity: 100 %

High Purity - Dynamic regeneration dryer The COSMOS MF.H2 Generator is designed for GC-carrier gas and detectors requiring Hydrogen fuel gas, such as FID, FPD, NPD and TCD. The Hydrogen gas is produced from deionised water using ...

Flow rate: 0.1 l/min - 0.6 l/min
Output pressure: 1 bar - 7 bar
Gas purity: 99.9996 %

Standard Purity - Using a desiccant cartridge The COSMOS MD.H2 generator is designed for GC-detectors requiring H2 fuel gas such as FID, FPD, NPD and TCD. The Hydrogen gas is produced from deionised water using the exclusive 100% ...

Output pressure: 14 psi - 160 psi
Gas purity: 99.9996 %
Rated capacity: 75, 230 W

Standard Purity - Static membrane dryer The COSMOS MB.H2 generator is designed for GC-detectors requiring H2 fuel gas such as FID, FPD, NPD and TCD. The Hydrogen gas is produced from deionised water using the exclusive 100% titanium ...

Flow rate: 0 l/min - 5 l/min
Output pressure: 30,000 Pa - 50,000 Pa
Gas purity: 93 % - 97 %

5L MEDICAL OXYGEN CONCENTRATOR NEBULIZER S OXYGEN CONCENTRATOR TWO USE. Alarm System: Hypoxie alarm/low pressure alarm/Error alarm/Power failure alarm PARAMETER • MODEL NUMBER XY-6S-5 OXYGEN CONCENTRATOR • OXYGEN PURITY 95% • ...

Flow rate: 0.5 l/min - 5 l/min
Gas purity: 90 % - 96 %
Rated capacity: 380 W

1.Imported-molecular sieves,CECA molecular sieves from France . 2.Super high efficiency high quality compressor,bearing imported from Germany,leather bowl,longer service life. 3.Low noise desgin,more breathing oxygen

Flow rate: 10 l/min
Output pressure: 1 bar - 4 bar
Gas purity: 90 % - 93 %

Psa Oxygen Generator For Ozone Generator Product Item：ZO-10 silent working long working life low maintenance cost reliable quality performance Category：Psa Oxygen Generator Working Principle PSA oxygen generator uses clean compressed ...

Flow rate: 1,200 l/h
Output pressure: 0.5 bar

This gas generator works only with water and electricity through the process of water’s electrolysis. The gas generated (hydrogen and oxygen) produces a neutral flame which develops a temperature of about 3650 °C and can weld, braze or ...

Flow rate: 500 l/h
Output pressure: 0.5 bar

This gas generator works only with water and electricity through the process of water’s electrolysis. The gas generated (hydrogen and oxygen) produces a neutral flame which develops a temperature of about 3650 °C and can weld, braze or ...

Flow rate: 2,400 l/h
Output pressure: 0.5 bar

This gas generator works only with water and electricity through the process of water’s electrolysis. The gas generated (hydrogen and oxygen) produces a neutral flame which develops a temperature of about 3650 °C and can weld, braze or ...

Flow rate: 0.7 m³/h - 9.9 m³/h
Output pressure: 0 bar - 9 bar
Gas purity: 95 % - 99.999 %

For low flow-rates Nitrogen generators for industrial applications, purity from 95% to 99,999%. Perfect for small quantities of nitrogen, from 500 liters/hour up to 35 Nm3/h. PSA technology Easy set up, only dry and filtered compressed ...

Flow rate: 1.5 m³/h - 20 m³/h
Output pressure: 0 bar - 9 bar
Gas purity: 95 % - 99.999 %

For low flow-rates Nitrogen generators for industrial applications, purity from 95% to 99,999%. Perfect for small quantities of nitrogen, from 500 liters/hour up to 35 Nm3/h. PSA technology Easy set up, only dry and filtered compressed ...

Flow rate: 2.2 m³/h - 30.1 m³/h
Output pressure: 0 bar - 9 bar
Gas purity: 95 % - 99.999 %

For low flow-rates Nitrogen generators for industrial applications, purity from 95% to 99,999%. Perfect for small quantities of nitrogen, from 500 liters/hour up to 35 Nm3/h. PSA technology Easy set up, only dry and filtered compressed ...

Output pressure: 2 bar

The efficiency of ozone production will be increased by using dry and oxygen-enriched carrier gases. Such gases can be economically provided by air separation. By pressure swing adsorption, the molecular sieve supplies a continuous oxygen ...