Pipe and hose accessories

Width: 12.7 mm

WORM DRIVE HOSE CLAMPS YDS worm drive hose clamps are popular and economy to widely use in industrial, automotive, and agriculture applications. Sometimes called worm gear hose clamps and American type hose clamps. The 1/2" width punched ...

Width: 12 mm

You will no longer see destroyed water pipes or crushed electrical ducts or gas pipes exposed to all kinds of shocks. The OMEGOM PIPE SHIELD BY WATTELEZ® is moulded in modified polypropylene elastomer which is very resistant to shocks, ...

Pressure: 20 bar - 207 bar
Flow rate: 8 l/min - 15 l/min

Description The HC22 is a compact unit weighing only 2.3 kg. It is ideal for use in a variety of applications where building and maintaining high pressure is required. The HC22 raises supplied pressure to a higher outlet pressure ...

The use of the GULBINAT Piggingsystems significantly improves the profitability of production plants through a long circle time and smaller maintenance intervalls. The GULBINAT technology shows highest quality standards Made in Germany. (GULBINAT ...

Diameter: 2 in - 8 in

The G-FIRE One-Bolt Figure 579 is a grooved rigid coupling designed to make joining pipe faster and easier than ever before. Arriving pre-assembled and prelubricated, the G-FIRE Figure 579 Coupling is ready to install right out of ...

Hose diameter: 25 mm - 338 mm

AC-Clamp Type SH, cast V-Clamp without Tension Band Material: AISI 316 stainless steel (equiv. 1.4408) suitable for ferrules ISO 2852, EN ISO 1127, DIN 32676, Non-standard, BS 4825, SMS, etc Type SB = Singlebolt (1 Bolt – 1 Hinge) Type ...

A high quality drainage system is imperative for a strong infrastructure. The integrity of roads, thoroughfares, parking lots and other paved surfaces depend on a reliable drainage system underneath to keep them intact. We offer PVC drainage ...

Brass pipe fittings meet SAE J530 and SAE J531 specifications. Pipe Fitting Advantages All pipe fittings threads are made to Dryseal standards. Working Pressure: From -65ºF to +250ºF at 1000 psi Note: Special fitting configurations ...

Model No.: FT100 Material:UPVC,CPVC,PP Size: DN15(1/2")~300(12") Standard:JIS,ANSI NOTICES INSTALLER: THE PLASTIC SYSTEM PIPELINE DESIGN AND INSTALLATION MUST BE COMPLY WITH THE BUILT STANDARDS AND SPECIFICATION,MUST ...

Natural Rubber type "C" inflatable pipe plugs The "C" Inflatable pipe plugs are fabricated form the finest quality- Natural rubber and are totally vulcanized. No adhesives or cements are ever used. Bladders are then encased in a 100% ...

STI series Derivative Booster is used in conjunction with a positioner on a control valve to increase stroking speed. It has been designed to pressurize on cylinder's chamber and discharge the other simultaneously. In this way, an high ...

Swivel joints Swivel joints are available in monoflow design for a broad range of applications, typically for large low, high operation pressure and low rotation speed. The swivel joint"Ganymed" are highly corrosion ...

Diameter: 54 mm - 60 mm

Specifications - With rubber lining Oval bolt hole - Benefits - Vibration damping Simple assembly - Application - Vehicle construction Mechanical engineering Plant engineering Electronics ...

Ideal Heavy Duty Clamps are working according to the screw-nut principle and are designed to provide accurate sealing at high pressure points. This product is characterized in that it provides extremely high band tension. Some of the ...

Diameter: 1 mm - 35 mm
Temperature: -50 °C - 240 °C

These glass yarn products have been treated with insulating materials (synthetic resins or silicone rubber). The insulating GRADE is proportional to the thickness of the coating. (from GRADE C3 kv. 0,8-1 to GRADE a kv.8). These products ...

Diameter: 9.7 mm - 75 mm

Adaptors/Adapters & Reducers, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory Used for thread conversion Wide range of thread types & sizes General purpose / industrial version available Equipment interface ‘O’ ...

Diameter: 1 mm - 52 mm
Temperature: -55 °C - 110 °C

Adhesive lined heat shrink tubing ideal for effective moisture-resistant insulation Flexible Adhesive bonds to plastics, rubber, steel, polyethylene and many other materials Shrink ratio: 3:1 & 4:1 Continuous operating temperature ...

Diameter: 28 mm

The Budenberg Swivel Adaptors have been designed for the ease of design and installation of Pressure Gauges and other instrumentation where positional orientation can be determined on site. The standard material is Stainless Steel, ...

Material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...

Diameter: 1 mm - 1 mm
Temperature: -70 °C - 250 °C

MF6 unique split, semi-rigid braided construction makes itthe ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, ...

Temperature: -55 °C - 230 °C

DESCRIPTION Sewed heat protection sleeve made of woven glass fibre with a laminated layer of aluminium foil or metallized polyester foil.A special treatment avoids fraying of the glass fibre weave. APPLICATION AREAS engine compartments ...

These Pipe Clamps are developed by UGA which comprise 2 models. The Pipe Clamp RS that is mainly used for parallel guiding of KSS systems next to each other or one on top of the other. The Double Pipe Clamp RSD that is developed suitable ...