Other extrusion line equipment

we designed different structures for different application,special for pipe,sheet,film,profile,spinning ,recycling extrusion etc,customized service is provided

we designed different structures for different application,special for pipe,sheet,film,profile,spinning ,recycling extrusion etc,customized service is provided single screw,twin screw,triple screw

we designed different structures for different application,special for pipe,sheet,film,profile,spinning ,recycling extrusion etc,customized service is provided single screw,twin screw,triple screw

Brabender Blown film take-up system for take – up and winding of blown film What does it do? In combination with a Brabender extruder and film blowing die head, a film can be taken up an winded. The film can be a mono-film or an co-extruded ...

Brabender Winder: Take-up and winding system for winding round rods and flexible tubes What does it do? The Brabender Winder winds round rods or flexible tubes on bobbins. Why is this important? - It completes an extrusion process ...

The wire take-off and winding unit takes off the coated wire and winds it up. The blank wire is straightened before it is coated in the wire coating die. After cooling in the water bath, the two nip rolls take off the wire at a constant ...

The Leica EM AFS2 performs freeze substitution and progressive lowering of temperature (PLT) techniques and allows low temperature embedding and polymerization of resins. The Leica EM FSP (freeze substitution processor), an automatic ...

Pipe diameter: 40 mm - 180 mm
Max. speed: 17.5 m/min

1.High-efficient cooling solution. the mould blocks are cooled with pressure water cooling system continuously，water circulate in sealed channels with pressure to achieve higher cooling efficiency and higher production speed, so as to ...

Pipe diameter: 300 mm - 1,000 mm
Max. speed: 3.8 m/min

1.High-efficient cooling solution. the mould blocks are cooled with pressure water cooling system continuously，water circulate in sealed channels with pressure to achieve higher cooling efficiency and higher production speed, so as to ...

Pipe diameter: 500 mm - 1,500 mm
Max. speed: 2.5 mm/min

1.High-efficient cooling solution. the mould blocks are cooled with pressure water cooling system continuously，water circulate in sealed channels with pressure to achieve higher cooling efficiency and higher production speed, so as to ...

Each extrusion head is manufactured to meet the specific needs and process parameters of each processed material and desired final product. They are equipped with interchangeable pins and bushings to speed up the change of measurement ...

Completely thermoregulated both externally and internally and made of chromed or stainless steel, the heads can be double output with predisposition for co-extrusion with one or more auxiliary inputs.

All our pipe production lines can be completed with the equipment required to widen and adapt the pipe inlets. We offer different machines according to our customer's manufacturing capacity: fully automatic pipe belling/socking machine ...

Automated embossing punching machine ECKOLD extrusion embossing allows for direct screwing in sheet metal and does away with press-fitted or welded nuts. The embossed structure formed in the process increases the number of turns for ...

The choice is yours. And therefore a lot of possibilities. Multi-channel dies are suitable when the processed materials have varying flow characteristics and an extrusion via co-extrusion feedblock does not allow a satisfying coating ...

Saving material with fast start up With flat sheet dies using MFCS technology (melt flow control system) the melt profile is adjusted automatically, without the use of mechanical actuators. The responding time is extremely short; the ...

Controlled quality for a smooth production With the combination of a BREYER automatic die and thickness measuring system you can control the complete process and simultaneously monitor the complete production. With an automatic die you ...

Pipe diameter: 56, 25, 120, 80, 65 mm
Max. speed: 30,000, 35,000, 20,000 mm/min

Single wall corrugated pipe machine Application: This corrugator produce PA/PE/PP/PVC single wall corrugated pipes. It is of many functions such as anti-high temperature, corrosion-proof, wearable, high strength. ...

Automatic belling machines for building and sewerage PVC pipes. Socket forming: smooth (solvent cemented) or shaped for insertion of rubber gasket (blowing system); Heating with infrared rays in oven with double chamber.

Round piece diameter: 16 mm - 2,000 mm

Planetary saws, equipped with disk and milling cutter for cut and chamfering of PVC pipes (rigid and foam) or other plastic materials. Swift replacement of tools, even with pipe in movement; Pipe blocking vices or universal ...

Round piece diameter: 25 mm - 200 mm

Innovative and original CUT AND CHAMFER WITH TOOLS for PP and PVC pipes. • - Especially adapted for cutting short pipe pieces in sequence (up to 6 different lengths) with high extrusion speed; • - No mechanical adjustments; • - Operation ...

AUTOMATED CUTTING LINES FOR ROUND BILLETS Made to improve extrusion and forging applications Our high speed technology, applied to a complex solution made to reduce operative costs and losses in extrusion/forging plants.

DEWA A-P automatic polymer preparation systems are an important part of the effective and reliable wastewater treatment process. It is applicable for both municipal and industrial applications. The batch preparation technology guarantees ...

Pressure: 2 mbar - 28,000 mbar
Flow: 0 l/min - 30,000 l/min

Precision pressure regulator for compressed air, gases, liquids. Pressure range : 0,001 bar bis 28 bar Connection thread : G1/8 - G1/2 Flow rate : up to 30 000 l/min

Pressure: 0 bar - 1,000 bar

High pressure regulator for gases and liquids. Max. inlet pressure : to 1000 bar Pressure range : to 1000 bar Materials : stainless steel and brass

Pressure: 0 bar - 414 bar

Stainless steel pressure regulators for compressed air, gases and liquids. Supply pressure : 5 mbar to 200 bar Temperature : -40°C to +130°C Options in : FDA, EAC, ATEX

Extruder screws and barrels: Screw structure and compression ratio can be designed according to different products & different output re quirement. Product Description: Conical Twin Extruder Screw Barrel Materials: 38CrMoAlA+ Ni +WC ...

1. - Nitrided screw and barrel: Material: 38CrMoAIA Surface hardness: HV860-1000 Nitriding depth: 0.5-0.8mm 2. - Bimetallic screw and barrel

Steel: 38CrMoAIA Heat treatment hardness: HB260n ~ 320° Nitriding hardness: HV9500 ~ 1000" Nitriding depth: 0.50" 0.7mm Nitriding brittleness: slffi grade 2 Roughness: Ra0.4 Screw straightness: 0.015mm Chrome plating hardness: ...

The Automatic coilers type ED and ES are dedicated for the coiling of corrugated pipes from 40 to 250 mm ODs. The EDS model is a compact and fast coiler for the pipes ODs from 40 to 90 mm. The inside diameter of the coiling wheels ...

The single coilers type EZ or double coilers type EDI are dedicated to the production of electrical conduit coils. The EZ 25 and EDI 25/32 single rewinders are wrapped in ring-wrapped rings with 16 to 32/50 mm diameter corrugated sleeves. They ...

Pressing force: 5 N - 10 N
Engine power: 2.1 kW - 2.2 kW
Cadence: max 3000.0 rpm

Shutter lamella microhole machines produced by YCS Makine are with you for many years thanks to their high-quality material quality! *High Material Quality *Aesthetic And Modern Design *Energy-saving *Long-Life Part *Fast And Quiet Production ________________________________________________________________________ YCS ...

•State-of-the-art Slot Die head •Unique design providing flexible coating width of: 1-25 mm •Default coating width: 13 mm •Modular designed for easy switch of flexible sized coating shims •Single and multiple stripe patterns •Surface ...

• - State-of-the-art Slot-die head • - Unique design providing flexible coating width of: 26-50 mm • - Default coating width: 50 mm • - Modular designed for easy switch of flexible sized coating shims • - Single and multiple stripe ...

• - State-of-the-art Slot-die head • - Unique design providing flexible coating width of: 51-100 mm • - Default coating width: 100 mm • - Modular designed for easy switch of flexible sized coating shims • - Single and multiple stripe ...

Round piece diameter: 60, 90, 125 mm

YVROUD offers a wide range of saw cutters, with different capacities. Many variants and adaptations are available depending on the intended application: • Motorised mobile cutters. • Corner saw devices. • Sawing + stamping devices • ...