RLGD-100, the Tunable Diode Laser (TDL) based technology makes remote methane leak detection possible. Easy to operate, instant response and built-in calibration function providing ultimate convenience and accuracy. FPI has more than ...
The EXPEC-3200 portable methane and non-methane hydrocarbon analyzer adopt heat tracing technology to transfer the heat up to 180 degrees and FID technology, effectively avoiding the loss of high boiling points and high concentration ...
GT series is a fixed gas detector suitable for gas power plants and pipeline leakages. Flammable and toxic gases are monitored at fixed points with various types of sensors respectively. FPI offers a rich gas detector portfolio that ...
The new Bruker Hyperspectral Imaging System HI 90 is an imaging remote sensing system based on the combination of a Michelson interferometer and a focal plane array detector. Each pixel of the array records an interferogram from the corresponding ...
• Thermoplastic enclosure • sWave® wireless technology (SW868/SW915/SW917/SW922) • No wiring and pipe laying required • Power supply by Lithium battery • Easy programming of receiver • Output signal can be individually configured ...
The Parker iCountPD is a highly compact, permanently mounted laser detection particle monitor that enables continuous monitoring of contamination levels in hydraulic and fluid circuits. Capable of communicating results in ISO4406 / AS4059 ...
for shaft heights up to 30 Different interfaces for the connection to different controllers low installation cost / little installation effort Wear- and maintenance-free Absolute values accurate down to the last millimeter
for shaft heights up to 130 Different interfaces for the connection to different controllers low installation cost / little installation effort Wear- and maintenance-free Absolute values accurate down to the last millimeter
Light intensity range: 0 lx - 20,000 lx
✔ Small lux and UV probe for use in display cabinets and on exhibition pieces ✔ Discreet monitoring of light-sensitive exhibits ✔ Lux measurement according to accuracy category C as per DIN 5032 Monitor light-sensitive exhibition ...
TESTO
UV flame detector UVC 1/UV sensor for continuous operation UVD for monitoring gas burners for intermittent or continuous operation in conjunction with burner control units BCU..U or PFU..U
World's First "Wave-and-Read" Technology One Button Triggers Measurement and Data Storage 0.6mm/0.8mm Height Accuracy Advanced RAB Code Technology Pre-installed Measurement Programs Height Difference Measurement Inverse Staff Reading ...
The role of dimensional metrology is expanding at a dramatic rate, in parallel with innovations in manufacturing processes. Given the ever more stringent accuracy requirements and falling cycle times in production (turning, milling, grinding, ...
It is a dual-mode detector capable to accept vapor samples and swab samples: With a weight of 3.5 kg it is literally a "go anywhere" device. A battery lifetime of 4 hours and the feature of hot-swap battery exchange further expand the ...
Bruker Handheld XRF Spectrometry
•Input for RTD, TC, Ω, potentiometer, mA and V •2-wire supply > 16 V •Output for current and voltage •Universal AC or DC supply •UL and cUL Approval Programmable by way of detachable display front, process calibration, signal simulation, ...
OMEGA
Pen phase detector with integrated torch Pen phase detector HT20 allows very quickly checking for the presence of AC voltage on any kind of electric installation with and without direct contact. A red LED turns on and a buzzer sounding ...
HT
Keysight's laser interferometry products, laser interferometer distance sensor, modular laser, optics and electronics give customers the flexibility they need in a precision laser measurement system. Optics and Laser Heads for Laser-Interferometer ...
Distance range: 0.4 m - 4 m
The ADTF3175 is a complete Time-of-Flight (ToF) module for high resolution 3D depth sensing and vision systems. Based on the ADSD3100, a 1 Megapixel CMOS indirect Time-of-Flight (iToF) imager, the ADTF3175 also integrates the lens and ...
Distance range: 5 m - 25 m
feature 270° detection angle and up to 25 m detection distance to accurately detect object presence. The scanners offer 16 field sets and teaching function for flexible installation and Ethernet / Bluetooth communication allows easy configuration ...
Autonics
Distance range: 5.6 m
2D 4-Channel Laser Scanners (to be discontinued) The LiDAR sensors LSE series feature 5.6 m x 5.6 m detection area (90˚) to accurately detect object presence. The scanners offer 4 separate laser beam channels which can be activated ...
Autonics
Distance range: 5.6 m
The LSE2 series LIDAR sensors feature 5.6 m x 5.6 m detection area (90˚) to accurately detect object presence. The scanners offer flexible installation in limited spaces with compact size (W120 x H47.5 x L89.4 mm). The Ethernet communication ...
Autonics
The PCE-160 CB line locator is a direct line locator for hard-to-reach lines. The line locator finds its application, for example in the automotive sector. When using the line locator, the transmitter is connected to the lines to be detected ...
Electronic pedal sensor modules comprise an accelerator pedal, angle sensor and mechanics for simulating the traditional feeling of the accelerator pedal for the driver. When the accelerator pedal is presseddown, the pedal sensor transmits ...
VIGO System offers the smallest on the market, environmentally friendly MWIR detection modules with the overall chip dimensions of 10 x 10 x 3 mm. Affordable detection modules are based on InAsSb semiconductor material which means no ...
Vigo Photonics
PC-LN2-14-1x1-VFP-NW-50 is a photoconductive IR detector based on HgCdTe heterostructures for optimal performance and stability. This detector is optimized for operation at cryogenic temperatures, typically at 77 K (liquid nitrogen temperature). ...
Vigo Photonics
PC-LN2-16.6-1x1-VFP-NW-50 is a photoconductive IR detector based on HgCdTe heterostructures for optimal performance and stability. This detector is optimized for operation at cryogenic temperatures, typically at 77 K (liquid nitrogen ...
Vigo Photonics
Precision RTD simulator -Model 4530 The precision RTD simulator is used where measuring instruments or controlling means with high precision must be examined or calibrated. The simulator is suitable for calibration laboratory and service ...
Wherever temperatures are measured, temperatures must also be simulated. The Pt100-simulator is suitable for a wide area of applications. It has a wide range of simulation, which is resolved in 0.1 °C steps and makes many assignments ...
Precision PT100 simulator - Model 4506, 4506 S The precision Pt100 simulator is used wherever measuring instruments or controlling systems have to be tested or calibrated with great precision. The standard version model 4506 simulates ...
▶ FEATURES ★ Remote display of all inclination product data of RION ★ Resolution: 0.01°/0.001° ★ Powered by lithium battery ★ IP54 protection grade ★ Wide temperature ...
Individual voltage alarm with headlamp Standards Complying with EC European Directives EN 61000-6-2 / EN 61000-6-4 Use ALADIN is a personal electric field detector combined with a professional headlamp. It provides the wearer ...
PENTA ESP
/ Standards • IEC 61243-1: VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C • CE compliante / Use These voltage detectors are designed for "proving dead". making sure that nominal voltage is actually ...
PENTA ESP
/ Standards • IEC 61243-1: VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C • CE compliante / Use These voltage detectors are designed for "proving dead". making sure that nominal voltage is actually ...
PENTA ESP
The Rig Rat III wireless multi-point system continuously monitors for toxic gases, combustibles and oxygen hazards. The self-contained, intrinsically safe site controller is equipped with built-in alarms for instant notification. Independent ...
DUST MONITORING WITH INDUCTIVE ELECTRIFICATION TECHNOLOGY Based on proven Inductive Electrification Technology, the S300 series has a detection limit of 0,01 mg/m³, while maintaining its globally recognized reliability and robustness. This ...
The TCI (Transducer Conditioning Interface) is a highly customisable interface system that converts the analogue signal of a measurement performed by LVDT or HBT transducers in a signal compatible with most of the data acquisition analogue ...
ASC (Automation Signal Controller) is a family of interface boxes designed to integrate analog and digital transducers via RS232 into PC and PLC using simple ASCII protocol commands. ASC family is perfect for the automation needs; ...
Automatic video measuring machines CHT series covers different measurement ranges offers powerful functionality and can perform precise measurements of surface dimensions, contours, angles, positions, and geometric tolerances for various ...
Chotest Technology Inc.
Automatic video measuring machines CHT series covers different measurement ranges offers powerful functionality and can perform precise measurements of surface dimensions, contours, angles, positions, and geometric tolerances for various ...
Chotest Technology Inc.
Automatic video measuring machines CHT series covers different measurement ranges offers powerful functionality and can perform precise measurements of surface dimensions, contours, angles, positions, and geometric tolerances for various ...
Chotest Technology Inc.
Please specify:
Help us improve:
remaining