Data Rack for optimum accessibility from all sides during assembly and installation as well as extensive mobility when using twin castors.
Input voltage: 85 V - 370 V
Output voltage: 12 V
Current: 1.25 A
-DIN rail mount -Universal Input 85-264 VAC, 100-370 VDC -Output voltage 12 VDC -Output power 15 W -Output current 1.25 A -Dimensions 17.5 (1SU) x 90 x 55 mm
These electricity-monitoring control devices detect minimal load variations by monitoring motor input power. They can be used on machine tools to shorten processing times and detect broken drills. Features ・Power detection ...
Smiths Interconnect offers a wide array of products to support signal distribution applications up to 20 GHz. The HybriX® family consists of signal distribution products for wide range of RF and microwave applications up to 20 GHz. ...
The SpaceNXT™ MWC Series is a high reliable 2-way Ku-Band isolated splitter, specifically designed and tested for space applications from MEO/GEO satellites to deep space probes. The SpaceNXT™ MWC Series is a 2-way Ku-Band isolated ...
Voltage: 16, 32 V
Combines battery banks when one is being actively charged, and disconnects them when charge voltage is removed. Supports high-amp intermittent or continuous current loads. Very low quiescent current draw (in On or Off states) due to bi-stable ...
Automatic charging station for R134a gas air conditioners gas tracer included R134A (250ml) Fully automatic model, complete with car/lorry database with gas quantities, compressor oil quantities and types, self-diagnosis software for ...
Input voltage: 95 V - 500 V
Output voltage: 23 V - 30 V
Current: 2 A - 10 A
In an AS-Interface network, data is transferred and power is supplied along the same cable. The power supply is a 30 V direct current. An alternating current is modulated onto this direct current as a data carrier. A special power supply ...
Input voltage: 120, 240 V
Output voltage: 24 V
Pepperl+Fuchs has many years of experience in explosion protection and applications involving power supplies installed in hazardous areas. Our power supplies meet the most demanding requirements when high reliability is needed for powering ...
Input voltage: 110 V - 240 V
Output voltage: 24 V
Current: 600 mA
19'' rack-mounted power supply for supplying the control inputs of automatic burner control units PFS/PFD.
Input voltage: 85 V - 264 V
Output voltage: 12, 15 V
Current: 1, 0.15 A
This is open frame offline switching power supply reference design. This reference board is targeted for residential indoor inverterized air-conditioning applications with multiple regulated output. It features the 5th generation fixed ...
Infineon Technologies AG
Input voltage: 230 V
Output voltage: 24 V
Current: 1, 8.4 A
MEAN WELL power supplies (series SP) with universal AC input and 24 V output. Variable voltage power supplies for general use configured for 24V and equipped with a button for direct open/close control of the Mechatronics series electric ...
Input voltage: 90 V - 264 V
Output voltage: 200 V - 4,000 V
Power: 500 W - 6,000 W
High-Voltage Power Supplies are generically configured consisting of an EMI (electromagnetic interference) filter, PFC (power factor correction) circuitry, rectifier, inverter, high voltage transformer, multiplier/rectifier-filter, high ...
Input voltage: 10 V - 30 V
Output voltage: 24 V
Power Supply Module — Power-Bridge Collective fault signal via relay Single and redundant power supply via terminals Supply inputs are decoupled Reverse polarity protection Removable screw terminals Connector for power bridge ...
TURCK
Input voltage: 230 V
Output voltage: 24 V
Current: 3.8 A
Compact power supply module in IP67 24 VDC output voltage - 3.8 A output current Broad temperature range Status LED Country of origin - DE Weight - 808 g Technical Data Power supply - 230 VUC Nominal output ...
TURCK
Input voltage: 380 V - 480 V
Output voltage: 24 V - 28 V
Current: 25 A
Smart Power Supply Module in IP67 24…28 VDC Output Voltage 3-Phase, 25-A Output Current Broad temperature range Status LED High efficiency, > 95 % 3-phase AC input, M12 S-coded Current-limited ...
TURCK
Input voltage: 110 V - 240 V
Output voltage: 3.7 V
Current: 0.5 A
Electronic pipette accessories protect and optimize your valuable pipettes to ensure they last many years. Rainin supplies many different products to enhance your favorite laboratory instruments. Find various accessories such as magnetic ...
Our Bulletin 898 DC Micro (M12) Distribution Boxes connect multiple devices to the control system and are a great way to increase flexibility and cut costs. They lower your labor costs by reducing installation and troubleshooting time. ...
Allen Bradley
Output voltage: 0 V - 120 V
Current: 0 A - 200 A
Power: 150 W - 1,520 W
The Teledyne Test Tools range of DC Power Supplies comes in non-programmable and programmable versions with one, two, three and four output configurations. Key features within the Teledyne Test Tool Power Supply range include programmability ...
Output voltage: 60, 30 V
Current: 3, 6 A
Power: 375, 195 W
Series 2230 power supplies provide up to 375 W of power in a compact 2 U high, half-rack wide enclosure. The 2230-30-6 offers up to 6 A from two channels; the 2230-60-3 offers up to 60 V from two channels. Adjustable, independent, and ...
Tektronix
Output voltage: 24 V
Power: 3, 7.5, 12 W
Supplies 24V electric power via an M8 connector. Compressed air to power the generator can be supplied merely by connecting a pipe to the 1/8” threaded port. To interrupt energy production, all you have to do is to switch off the compressed ...
Input voltage: 100 V - 240 V
Output voltage: 20 kV - 90 kV
Output frequency: 50, 60 Hz
The Ransburg 9060 Series Power Supplies provides maximum transfer efficiency to the applicator. The Ransburg 9060 power platform, based on proven Ransburg voltage generation technology, is a series of high and low voltage power supplies ...
Thanks to its high resistance to light and weather, the LISTA e-bike charging station is ideally suited for the central supply of e-bike and pedelec batteries for outdoor use. Each compartment has a power module with two fused sockets. ...
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 0 mA - 3,000 mA
Features *** Wide input voltage: the input working voltage range is 100-240VAC. *** Low power consumption: No-load <0.075W. *** High energy efficiency: Six levels of energy consumption, power efficiency up to 89%. *** High reliability: ...
Beijing DWIN Technology Co., Ltd.
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 0 mA - 3,000 mA
Features: ● Wide input voltage: the input working voltage range is 100-240VAC. ● Low power consumption: No-load <0.075W. ● High Energy Efficiency: Six levels of energy consumption, power efficiency up to 89%. ● High reliability: ...
Beijing DWIN Technology Co., Ltd.
Input voltage: 100 V - 240 V
Output voltage: 24 V
Current: 0.5 A - 0.7 A
Features: ● Wide input voltage: the input working voltage range is 100-240VAC. ● Low power consumption: No-load <0.075W. ● High Energy Efficiency: Six levels of energy consumption, power efficiency up to 90%. ● High reliability: ...
Beijing DWIN Technology Co., Ltd.
Input voltage: 12 V
Output voltage: 230 V
Current: 16 A
AC/DC power supply - Batt Pak Emission-free energy supplyfor our environment – for clean air _______ Mobile Power Supply for: * Electrical construction equipment * Plasma cutters and welders * Battery chargers * Luminaires in ...
Switched-mode power supplies for top-hat rail mounting Version: Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current ...
The SV210 can be used as a signal distributor, as well as a signal converter. It can be used to split or convert SinCos input signals to two SinCos outputs and two HTL / TTL outputs. • Input in the format SIN +, SIN-, COS +, COS-, ...
motrona
The SV211 serves as signal distributor for SinCos signals. With the help of the SV211, a SinCos input can be split up to four SinCos outputs. • Input in the format SIN +, SIN-, COS +, COS-, REF +, REF- • 4 outputs in the format SIN ...
motrona
The encoder distributor GV204 is used to divide one input signal (HTL or RS422) into two output signals (HTL or RS422). If more than two terminal devices are connected, the devices can be cascaded. It is also possible to use a larger ...
motrona
Input voltage: 100 V - 240 V
Output voltage: 24 V
Current: 2.5, 15, 30, 6, 12 A
The PSR series power supplies are regulated DC power supplies capable of operating from 100-240 VAC input, 50/60 Hz. The PSR power supplies include a shunt regulator and blocking diode. They can be used with any controller/amplifier combination ...
Input voltage: 120 V - 240 V
Output voltage: 24 V
Current: 2.1 A
Enclosed Laptop Type Power Supply ideal for desktop testing of SmartMotors™ This power supply connects directly to: CBLSM1-DEMO SmartBox™ SmartBoxBCD™ It is ideal for desktop testing of SmartMotors™ and will easily run ...
Please specify:
Help us improve:
remaining