Other electric power supplies and equipment

Our overload protection mounts offer an environment that preserves the flexure's integrity, these mounts can be set up to ensure the flexure is never overloaded. This Assembly pairs with the S251 low profile Load Cell sensor offering ...

Input voltage: 120 V - 240 V
Output voltage: 12 V - 24 V

Supplies 12VDC or 24VDC Integrated battery charger 7 amp-hour capacity Meets NFPA standards Type 1 enclosure UL Listed Federal Signal Power Supplies provide nominal 12VDC or 24VDC power that is switch ...

Input voltage: 90 V - 268 V
Output voltage: 24 V - 80 V
Current: 6.3, 5.2, 5, 10, 6.7 A

• DIN rail mounted • Fanless enclosure • For use with DC-powered stepper drives and integrated motors The PS150D24 switching power supply is a DIN rail mounted power supply in a fanless enclosure. It is an excellent choice for use ...

Low-Voltage DC Power Supply Use the SEL-9321 Low-Voltage DC power supply as an inexpensive, robust means to convert high-voltage dc battery sources for use with communications or instrumentation devices.

Energy storage is an efficient and effective solution to store and use energy on demand, providing flexibility across the grid. Energy storage systems provide a wide range of technologies and approaches to manage power supplies, create ...

Features • Indicates Power factor of electrical systems • Several voltage ranges available • Current connection via “through hole” CT on the instrument. No need to interrupt wiring from CT Benefits • Easy to operate • High visibility • ...

Compensation of operational leakage currents up to 500 mA (RMS) Increases the operational safety of plants Use of RCD / RCCB with a differential current of 30 mA or higher according to DIN VDE 0100-530 is possible Operational leakage ...

Input voltage: 85 V - 370 V
Output voltage: 24 V
Current: 3 A - 60 A

The Panel Mount Switched Mode Power Supply ensures excellent load and line regulation, offering high noise immunity and low ripple for stable performance. With a minimal No Load Power Consumption of less than 0.5W, it is an energy-efficient ...

• Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; • Low Insertion Loss & Low VSWR; • Low PIM, supports -140/-150/-155/-160dBc; • N, 7/16 DIN, 4.3-10 Female connectors are available; • Use for equal splitting ...

Input voltage: 100 V - 240 V
Output voltage: 15, 12, 20, 9, 5 V
Current: 3.25, 3 A

65W power supply USB-C PD3.0 USB-C wall charger with PD 3.0, enables you to charge your telephone, tablet, laptop or any other USB-C device. QuickCharge. - Input voltage: 100-240V - Output 1 USB-C: 5/9/12/15V 3A 20V 3.25A - ...

Voltage: 625 V - 900 V

BattGrid™ is designed to provide services to renewable or hybrid power plants (combining thermal power and renewable energy), and grid operators. BattGrid™ sends orders to the various pieces of equipment in real time to regulate overall ...

Input voltage: 12.8 V
Output voltage: 5 V - 230 V
Current: 15 A

PowerBox PB300 Li-Ion: for more flexibility in logistics environments Equipped with a sturdy housing, a practical handle and a power supply that lasts for an entire shift, the PB300 Li-Ion is your perfect companion: light, ergonomic ...

Input voltage: 85, 265, 90, 250 V
Output voltage: 24 V
Current: 5, 10, 20 A

• Single phase, primary switch mode • Stabilized output voltage • Short circuit and overload protected • High efficiency • DIN – rail mounting to EN 60715

Input voltage: 400 V
Output voltage: 24 V
Current: 10 A

The new power supply from Wöhner With Broome10®, Wöhner developed for the first time for Automation and Control systems a 24V DC-power supply for direct contact on the CrossBoard®. The excellent efficiency of 95 % and the selection ...

The TST allows you to check the radio coverage and signal reception quality of Sigfox and LoRaWAN networks. It allows you to optimize and validate the positioning of your IoT sensors in the field. The operation is very simple: a push ...

Input voltage: 6 V
Output voltage: 3 V - 6 V

Model : 6V Laser Module Power Supply Kit 6V laser module power source, fit for all Quarton laser modules that operation voltage is 3~6 volt. FEATURES: 1. 6V laser module power source, fit for all Quarton laser modules that operation ...

Splitters portion the lubricant quantity evenly across the outlets and are suitable for oils and greases up to NLGI grade 2. The amount of lubricant yielded by the lubrication system can be split into two, three or four parts and then ...

The current monitoring device for up to 6 loads The CC261 current monitoring device can monitor up to 6 loads in a current range from 100 mA to 15 A for faults. Both direct current and alternating current signals with 50 Hz or 60 Hz ...

Power: 7.2 kW

The charging station allows you to recharge an electric vehicle up to a maximum power of 7.2 kW by connecting it to the appropriate plug supplied; in doing so, charging mode 3 is achieved (according to the IEC/EN 61851 - 1) which consists ...

The F3-07Ex* module is intended to protect electric motors and transformers mainly for mining equipment and machinery. It can be applied in compact switches/ power stations/transformer units, etc. External intrinsically safe measurement ...

Input voltage: 230, 220 V
Output voltage: 24 V

UK power supply unit for the power supply of the SCAT level control (220/230V) to be reordered. Power supply-UK 220/230V for signal box T1 & T5 // 24 Volt, length of the cable = 1900 mm

Input voltage: 90 V - 264 V
Output voltage: 5 V - 24 V
Current: 25 A - 60 A

Power supply module for use in industrial environments. Flat profile for wall mounting. Specifications Output Power: 30, 60, 100W Output Voltage: 5V to 24V Wide Range AC Input Operation temperature: -25°C to +71°C Convection ...

The power factor controller CR 2020 calculates the actual and reactive power in the mains from the measured current and voltage. It also determines if actual power is being consumed or delivered. The controller identifies the power ...