Application: It is special UV exposure machine with dryer , easy operate & low cost use for pad stencil , for silk screen plate ,screen frame, steel plate. Exposure fast and drying oven ,save time. ,UV lampes long life. Technial ...
Active cooling system with fan 50 Watt LED-Array with 20 UV-LED Process-exposure-area with mirrored surface Overtemperature switch Integrated glass to protect LED-Array Easy access to take glass out for cleaning Digital Timer Free programable ...
Beltron GmbH
The Vakucop S Series manufactured by Beltron GmbH is a screen printing and vacuum unit. This device is made with a copying frame design that is applicable for the vertical and horizontal exposures. Additionally, the copying frame can ...
Beltron GmbH
The Beltroframe S is a copying unit for screen printing. It is embedded with screen exposure that is designed for all type of the unit's templates. The machine has a quick lockable top frame that is supplied with throttle controls. It ...
Beltron GmbH
Travtec Tampino 2 Automatic tamper-evident seal applicator. Can be used on or off-line to apply tamper labels to cartons & boxes. Uesd in pharma, cosmetics & consumer electronics.
SMARTPRO AIR DO ENGRAVING SYSTEM HANDPIECE H3 FULL SET Compatible Machine: Air Do X Engraver System & Air Do S Engraver System Measurement: 7 X 3 CM Weight: 160 gram Hose Pipe: 1.1 Meter, ID 2 mm and OD 4 mm Piston: 2 set ...
The MH-80 is about the same as MH-115. Only different is a case made by steel and guideline. Therefore, it’s light and easy to installation. The moving guide made by iron and X, Y-axis has a rollers(Bearing) inside for smooth and long ...
Marksman marking system
The MK-85BS is Ball Screw Heads which are able to mark with very high precision (1mm character height). The case is constructed of Steel which makes it light and easy to install. The Ball Screw is constructed of iron, and the X-Y-axis ...
Marksman marking system
The MK-100BS is a Ball Screw Head which is able to precise marking. Possible to mark precise marking like 1mm character marking and stability and the quality for the character of MH-100BS head is much better than previous marking head. ...
Marksman marking system
ERB 1 • Fixed code identification system • General Features: This system allows to assign an identification code to the fixed or mobile parts. The code holder is the transmitter and it works with no need of power supply. The code reading ...
The ELECTROCLASS SupplyPoint automatic vending machine is the secure distribution range solution for: • Managing your references optimally • Simplifying and securing distribution of all your sensitive references • Preventing stockout This ...
Standard features HM-800 - Wax standard HM-810 - Wax High quality HS-500 - Wax Resin standard HT-500 - Resin standard HM-510 - Resin High quality Optional accessories mm 40 x 360 - 450 mt mm 60 x 360 - 450 mt mm 80 x 360 ...
ETX- 1 is a dispenser for self-adhesive labels not trasparent fed in rolls very compact and lightweight. The labels are read by two self-learning sensors microprocessor controlled. They can automatically identify the difference in transparency ...
Developed to suit industrial application, it is a semi-automatic dispenser for self-adhesive labels fed in rolls. Fully made of steel, it is easy to operate, is flexible and suitable for any type of label commonly in use. DWR is available ...
KNOBS - HOT STAMPING The hot stamping of your wheels from our marking machines applies to flat and cylindrical parts with multiple hardnesses.
BRASS PUNCH Made of Steel or brass, the punches used on our marking machines can be applied to both flat and cylindrical parts.
UV-EXPOSURE BOXES Exposure boxes for single side expose of fotosensitive PCB laminates and foils Strong aluminum profile housing, available in two dimensions 317x225x90mm, (usable lighting area 160x230mm, A4) ...
Gie-Tec GmbH
Vacuum UV Exposure Box Exposure boxes for single side and double side expose of fotosensitive PCB laminates and foils. Strong aluminum profile housing, availbale in two sizes (A4, A3) Exposure box 1 (WxDxH) 475x425x140mm, ...
Gie-Tec GmbH
TUV ERASURE BOXES TUV low pressure lights for erasure E-PROM, PLD, usable for air purification units Strong aluminum profile housing, availbale in two sizes TUV low pressure straight tube lamps (Fab. Philips), wavelength ...
Gie-Tec GmbH
Product width: 0 mm - 800 mm
Weight: 65 kg
Automatic label applicator LA for waterfall collections • Pre-printed labels on rolls are automatically pasted onto waterfall strips • Equipped with 4 roll holders • Suitable for various label materials and formats • Easy setup ...
Is a mobile trolley, in painted metal. Indicated for masking-film rolls (Art. 970). Equipped with two wheels for a better moving and spring.
Wide range of top quality tampon printing clichés: - 0.3mm steel - 0.5mm steel - 10 mm steel - Alcohol Red Polymer - Water-based Gold Polymer - Water-based Green Polymer - etc... We also have our own cliché design and engraving ...
A wide range of top quality tampon pads for pad printing. Available in a wide range of shapes, hardnesses and types of silicone: Shapes: - Round - Square - Rectangular - Large Format - Special Shapes - Rotary Hardnesses: - ...
Can be mounted at any orientation, for: marking, numbering, indenting, embossing, identifying, punching, shaping, crimping, bending, staking and other applications.
SOMAUT S.r.l.
This pneumatic, professional pen combines power with flexibility. - - - It allows extremely easy writing or drawing as if a regular pen. - - - - - - It provides for a large variety of uses from glass engraving to marking ...
SOMAUT S.r.l.
punches made in extra hard carbon steel hardened at 60 - 62 HRC and sandblasted. The spherical cap that receives the hammer stroke is manufactured to prevent any breakage or distortion for the operator's safety. The checks that punches ...
SOMAUT S.r.l.
Speed: 180,000 mm/min
The most important The electronic gear allows cutting any size and adapts to the register mark by the tactile touch screen. The speed is taken from the host system by an encoder or dancer. It can be moved from one machine to another ...
Speed: 180,000 mm/min
The most important The electronic gear allows cutting any size and adapts to the register mark by the tactile touch screen. The speed is taken from the host system by an encoder or dancer. It can be moved from one machine to another ...
The REINER jetStamp® 990 is characterised by rapid speed and particularly handy use thanks to its compact size. The smallest device from the jetStamp® family permits quick and simple markings on any smooth or irregular surface. Like ...
ColorHues® Glitter acrylic sheets feature glitter embedded directly into the tinted plastic, creating a dazzling, eye-catching effect. The high-quality gloss finish on both sides of the sheet gives a glass like appearance with the durability ...
Rowmark
The PROLABEL is a fully automatic and space-saving label applicator that applies labels to pallets and packages. Position and number of labels can be freely selected and flexibly changed. The overhead positioning of the robot allows labelling ...
The PROLABEL is a fully automatic and space-saving label applicator that applies labels to pallets and packages. Position and number of labels can be freely selected and flexibly changed. The overhead positioning of the robot allows labelling ...
QUICK knurling wheels according to DIN 403 for profiles according to DIN 82, with 45° chamfer, PM
Hommel+Keller Präzisionswerkzeuge GmbH
QUICK knurling wheels according to DIN 403 for profiles according to DIN 82, no chamfer, PM
Hommel+Keller Präzisionswerkzeuge GmbH
Especially versatile since it is independent of the workpiece diameter Marking is possible at high speed Change in reading direction is possible (see operating manual) Features n The design of marking roll n° 41 is independent ...
Hommel+Keller Präzisionswerkzeuge GmbH
Our shotshell primer inserting machines enable you to import unprimed cases and primers separately. This shortens delivery time and drastically reduces SHIPPING and insurance costs. SAFEST and MOST ACCURATE solution for shotshell ...
Designed for demanding industrial environments, with greater resistance to water and solvents than previous SATO print engines, the S86NX provides high usability and productivity to factories and warehouses for its print and apply labelling ...
SATO Asia Pacific
The MBO SVC sheeter is variable and fully electronically adjustable in terms of format and cut-out size. Thanks to its solid industrial construction, the SVC series is designed for the highest customer requirements and maximum running ...
Product length: 23.9 mm
Product width: 50.8 mm
The EasyTouch™ Label Applicator features edge detection, which automatically detects the leading edge of your label to provide accuracy with each squeeze of the trigger. Dispenses die-cut labels, 2.0" (50.8 mm) wide. Labels Not Included. Labeler ...
Avery Dennison Printer Systems Division
Thanks to its great modularity and versatility, the machine satisfies every serialization and traceability requirements or norms and can reliably handle production speed up to 350 cartons/min. Its compact overall dimensions mean easy, ...
Product length: 12 mm - 500 mm
Product width: 12 mm - 104 mm
Label Application System with minimum maintenance requirement The Videojet Labeljet 210 Industrial Label Printer is a modern microprocessor controlled labeler applies pre-printed adhesive labels to a wide variety of products in low ...
VIDEOJET
Please specify:
Help us improve:
remaining