Other attachment devices

QUARTER-TURN CLAMPS made of STAINLESS STEEL One-Touch Fasteners are quick release fasteners for frequent changeover of machinery or fixture. Quick and easy tool-less clamping reduces setup time in changeover. IMAO's quick release ...

KNOB-LOCKING PINS with POSITION SENSOR RECEPTACLES One-Touch Fasteners are quick release fasteners for frequent changeover of machinery or fixture. Quick and easy tool-less clamping reduces setup time in changeover. IMAO's quick ...

PIN HOLDING CLAMPS One-Touch Fasteners are quick release fasteners for frequent changeover of machinery or fixture. Quick and easy tool-less clamping reduces setup time in changeover. IMAO's quick release fasteners are available ...

Detachable front and rear panel for easy machining IP 20, in accordance with IEC 60529 Supplied as space-saving flat-pack Modifications such as cutouts, different finishes or dimensions availalble Internal and external dimensions ...

Grounding/earthing kit optional RAL 7030 powder coat finish IP 20, in accordance with IEC 60529 External dimensions in accordance with IEC 60297-3-101 Grounding/earthing connectors to: DIN EN 50178/VDE 0160, DIN EN 62368-1/VDE ...

System in accordance with IEC 60297‐3‐101, 102, 103; IEEE 1101.1, 1101.10/11; backplane conforms to VITA 1.1‐1997 PSU, open frame, 560 W (400 W at < 180 VAC) Heat dissipation by 2 fans, cooling from front to rear side; temperature‐controlled ...

Shaft collars GN 705 essentially comply with the versions of DIN 705. GN 705 also contains a number of practical intermediate sizes in addition to the DIN-versions as well as Type E (grub screw with internal hexagon). The clamping ...

T-nuts DIN 508 with the tensile strength class 8 (plain) are also available without thread. They can be adapted for special applications in this way.

Owing to the anodized coating of the fork head, the bearing is virtually non-wearing.

Kontron can fullfill customer demands for complex computers leveraging in-house expertise on computer blades and specialized enclosures - Contact us. The R4U8S is a 4U height 19'' Rack Mount Industrial Chassis featuring 8 slots of either ...

The R2U4S is a 2U height 19'' Rack Mount Industrial Chassis featuring 4 slots of either VME or cPCI 6U size boards. The R2U4S has successfully passed the mechanical, thermal, electromagnetic EMC/EMI qualification tests required by our ...

High power hot swap fans with 3 m/s (average) Up to 4 power supplies (1000 Watt) 14 node slots within two 7 slot CPCI segments 2 switch slots for Gigabit Ethernet Switches Chassis Monitoring board option PSB ...

Vibrations are easily isolated in different directions Quick Fastening Elements Load range 0.4 kg to 28 kg Decoupling two components effectively from each other: The quick connection element of the product family Flex Locs is a releasable ...

MATERIAL Cast AISI CF-8 stainless steel, sandblasted matte finish. FEATURES AND APPLICATIONS These wing knobs allow high tightening torque values and a comfortable grip, thanks to the elongated hub.

STANDARD EXECUTIONS - DIN 508: black-oxide steel class 10 (tensile strength 1200 N/mm2). - DIN 508-NI: AISI 303 stainless steel.

Post Mould Installed SPIROL manufactures several different styles of Post Mould Installed Compression Limiters for installation into the plastic component after the moulding process is complete. Installing Compression Limiters after ...

Post Mould Installed SPIROL manufactures several different styles of Post Mould Installed Compression Limiters for installation into the plastic component after the moulding process is complete. Installing Compression Limiters after ...

Post Mould Installed SPIROL manufactures several different styles of Post Mould Installed Compression Limiters for installation into the plastic component after the moulding process is complete. Installing Compression Limiters after ...

Diameter: 34, 48, 40 mm
Length: 10 mm - 40 mm

Threaded zinc plated steel stud. Material Black thermoplastic, glass fiber reinforced, mat.

Diameter: 6, 8, 10 mm
Length: 36, 28 mm

Brass insert with tapped blind hole. Material Black thermoplastic, glass fiber reinforced, mat.

Diameter: 6 mm
Length: 30, 20 mm

Threaded stainless steel stud (AISI 303). Material Black thermoplastic, glass fiber reinforced, mat.

The 8U, 12R2 is designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock isolated versions are designed to attenuate 25G shock inputs to the chassis to less than 10Gs at the card ...

The 9U, 12R2 is designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock isolated versions are designed to attenuate 25G shock inputs to the chassis to less than 10Gs at the card ...

The 12U, 12R2 was designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock isolated versions are designed to attenuate 25G shock to the chassis to less than 10Gs at the card cage ...

The Mounting Plate is made of metal and it is utilized with attachment frameworks that is fit for IPN beams. It also guarantees the following elements to be fastened rapidly, safely and in compliance with the prevailing necessities. First ...

Specially designed for all piped products, the PFS flange seal is made of a stainless steel washer and a vulcanized elastomer seal lip. With its double lip, the PFS ensures permanent sealing, eliminates fugitive emissions and reduces ...

- 398 mm short depth 2U rackmount chassis - Supports ATX and mATX form factor motherboard - Dual front USB 3.0 - Support 350W 80 plus single flex ATX power supply or 500W 2U redundant power supply - Front-accessible ...

- All I/O ports, buttons, LEDs, drive bays, AC inlet located on the front side - Supports ATX/Micro ATX MB with CPU TDP up to 120W - Built-in 500W single or redundant power supply - 350mm short depth - Optional module ...

- Supports a PICMG backplane with up to 15 slots or an ATX/Micro-ATX motherboard - Shock-resistant disk drive bay holds four hot-swap 3.5" and 2.5" SAS/SATA disk trays, one slim optical disk drive, and one 2.5" internal drive - ...

EXTREME PURITY EXPANDED GRAPHITE FOR INDUSTRIAL VALVES High-purity expanded graphite without a binder. Resistant up to 3,000°C (in an inert atmosphere). Compressed sealing rings made of 99.85% pure expanded graphite, without binder. ...

Expanded Graphite rings Industries : All industries. Material : Pipes flanges, Valves.

EXPANDED GRAPHITE TAPE FOR INDUSTRIAL VALVES High-purity expanded graphite without a binder. Temperature resistant up to 3,000°C (in an inert atmosphere). Very low friction coefficient, very high self-lubricating capability, good chemical ...

Aluminum seal- and centring ring for small flange in action Sealing and centring ring, aluminum, Clamping rings Aluminum clamping rings with a wing nut are a rapid connection that can be mounted without any tools for soft (primarily ...

Fasten and decouple SNAPLOC® joins without transmitting vibrations or noise. The two-piece SNAPLOC® fastening system consists of a ball stud and a coupling for quick assembly and is based on the principle of a simple snap connection ...

Tolerance compensation – production efficiency The use of FLEXITOL® systems permits greater manufacturing tolerances, thereby allowing for more effective production methods. FLEXITOL® tolerance compensation systems were developed ...

Our QUICKLOC® clamping, rotation and pressure locks create repeatedly releasable joints. Easy to fit and even easier to operate –the right quick-release system also allows repeated opening and closing. QUICKLOC® is the perfect solution ...

Interface for TGP20 pneumatic gripper Clamp-type mounting bracket, diameter 10 mm, short, with screws Clamp-type mounting bracket, diameter 14 mm, short, with screws Clamp-type mounting bracket, diameter 20 mm, medium, with screws Clamp-type ...

• Aluminium brackets for lobed cylinders or tie rod cylinders. • Many sizes available. • Steel fixing screw and locking plate included in the package.

• Nylon clamps for fixing sensors on micro-cylinders. • Many sizes available. • Steel fixing nut and screw included in the package.

Clevises DIN 71752 / DIN ISO 8140 / CETOP RP102P are some of the most frequently used linking elements in industry. These parts can be found everywhere where simple movements are required, e.g. linear pulling, pushing or even axle offset ...

Clevis joints with folding spring bolt are connecting elements that are commonly used in industry especially for simple movement sequences, e.g. linear pulling, pushing, sliding or axial offset compensation. They are used in a wide range ...

MBO Clevises are U-shaped or forked metal connectors to which another part can be fastened by means of a bolt or pin passing through the ends of the connector. Clevises are used commonly in the industry for carrying out pulling, pushing, ...

Precision fit, aesthetics, strength, and numerous stud sizes, styles, and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit, even ...

This versatile design offers a comprehensive range of low-cost, grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-release ...

The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles, stud lengths, receptacle styles, and accessories, provide flexibility for accommodating ...

Cable diameter: 4 mm - 45 mm
Thread diameter: 15 mm - 66 mm
Operating temperature: -40 °C - 100 °C

The product is made and designed with the primary priority of assuring the safety of the people and their treasured property. To continue, it is applicable in the construction of tunnels, ventilation systems and the construction of underground ...

ONSERT® allows the adhesive bonding of various fasteners to a wide range of materials. As a specialist in mechanical joining systems, we have developed together with DELO, the expert in intelligent adhesive technology, a new fastening ...

SNAPLOC® joins without transmitting vibrations or noise. The two-piece SNAPLOC® fastening system consists of a ball stud and a coupling for quick assembly and is based on the principle of a simple snap connection or plug-in connection.

Our QUICKLOC® clamping, rotation and pressure locks create repeatedly releasable joints. Easy to fit and even easier to operate –the right quick-release system also allows repeated opening and closing. QUICKLOC® is the ...