2-piece valves

DN: 15 mm - 800 mm
Pressure: 40, 25 bar
Temperature: -10 °C - 200 °C

... 1092 full bore KLINGER Ballostar-KHI - 2-piece Ball Valve Ball valve for rough use! For use everywhere reliable functioning is required, where large nominal ...

DN: 25 mm - 150 mm
Pressure: 16 bar

Flanged ball valves PN 16 made of spheroidal graphite cast iron (GGG40) 2-piece ball valve "screwed design" Full port design Fire-Safe design Floating ball Grey ...

DN: 6 mm - 100 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

... flange) B3.622 > two-way, 2 pieces body, full bore, with or without ISO 5211 flange C3.622 > two-way, 3 pieces body, full bore, with or without ISO 5211 flange 04.622 ...

DN: 15 mm - 250 mm
Pressure: 16 bar - 640 bar
Temperature: -40 °C - 425 °C

... butterfly valves, single seat on-off valves, sleeve on-off valves, three-way on-off valves, etc. Switch valves are mainly used to cut off or connect ...

DN: 40 mm - 600 mm
Pressure: 150 psi - 2,500 psi

Specifications Size - 1.1/4inch, 1/2inch, 1inch, 2inch, Upto 24 inches Type - Ball Valves Material - Carbon Steeel, Metal, Stainless Steel Certification - ISO 9001:2008 Application ...

DN: 15 mm - 200 mm
Pressure: 1 MPa - 6.4 MPa

Body Material: Carbon Steel, CF8M Ball Material: Stainless Steel Seat: PTFE, RTFE, PPL End Connections: Flanged Input and Output Signal: DC 4-30mA, DC 0-10V, DC 1-5V Voltage: AC110-240V 380V 50/60Hz, DC 12V, DC 24V Power ...

DN: 0.75, 1 in
Pressure: 0 psi - 100,000 psi
Temperature: -18 °C - 204 °C

Standard valve fully opens in 4 – 1/2 turns. Vee type stem is standard 4-sided tapered stem for maximum handle contact. No chance of the handle slipping or loosening on stem. Two-piece, ...

DN: 10 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 180 °C

FPM shaft “o” ring PTFE + 15% GF ball seats Stainless steel valve BSP threaded Nominal pressure: 100 Bar Working pressure: see pressure / temperature diagram Temperature = -20°C +200°C

DN: 25 mm - 200 mm
Temperature: -200 °C - 600 °C

Neles series X modular ball valve, incorporates robust stem to ball connection in seat supported models. Application based seat selection assures valves are capable of delivering long lasting tightness. ...

DN: 3 mm - 1,400 mm
Pressure: 10 bar - 800 bar
Temperature: 180 °C - 650 °C

... ball valves up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valves of this design are well suited for extremely abrasive and corrosive fluids. Böhmer ...

DN: 0.25 in - 3 in
Pressure: 68 bar
Temperature: -29 °C - 200 °C

Stainless steel ball valve. With or without locking device. Full bore. EU1935

DN: 11.6 mm - 100 mm
Temperature: -30 °C - 180 °C

DESCRIPTION • 2-way ball valve BSP female threaded • Full bore • Body, ball and stem SS316 • Seats PTFE 15% glassfiber filled • Working pressure maximum 63 Barg • Temperature -15º up to + 180º C. • ...

DN: 2 in - 12 in

... Trunnion Mounted Ball Valve) Valtorc's trunnion mounted designed ball valves are a high strength and quality valve for your industrial needs. Offered in class 150/300/600/900 and ...

DN: 0.25 in - 1 in

This ball valve has a compact main body size and takes up little space for installation.

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C

... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made ...

PolyCheck HDPE foot valves are available from 3″ to 14″ Table D, DIN and ANSI. Our valves provide a hermetic closure, allowing you to use it as a check valve in discharge and foot ...