2-pole motors

Torque: 0.35 Nm - 0.99 Nm
Diameter: 42 mm

High-Torque 2-Phase Stepper Motors Features High torque in the lower speed range Compact design Low heat generation Energy-saving Frame size: 20 - 85 mm Basic step angle: ...

Power: 9, 2, 1, 19 W
Intensity: 0.3, 0.4, 0.9, 1.8 A
Torque: 0.007, 0.0068, 0.0067 Nm

The 16ECP36 2A motor has been developed to be one of the most advanced and highest performing brushless slotless motors in its class. Featuring integrated electronics, the 16ECP36 2A ...

Power: 27.5 W
Intensity: 2.1, 0.9, 0.4, 0.3 A
Torque: 0.0072, 0.0071, 0.007, 0.0075 Nm

Downsize and optimize your application with a brushless slotless DC motor that also runs up to 25W continuous power at 60,000 rpm. Motor Highlights > Optimized and flexible mechanical ...

Power: 19.3, 7.3, 2.1 W
Intensity: 0.72, 0.39, 1.7 A
Torque: 0.0134, 0.0139 Nm

... 16ECP52 2A motor has been developed to be one of the most advanced and highest performing brushless slotless motors in its class. The 16ECP52 2A motor ...

Power: 0.12 kW - 17 kW
Intensity: 0.67 A - 36 A
Torque: 0.56 Nm - 55.1 Nm

... following versions: 4-2-pole, 8-2-pole and 8-4-pole. Switchable pole motors have the advantage that they only need ...

Power: 0.12 kW - 55 kW
Rotational speed: 2,500 rpm - 3,500 rpm

... Efficiency classes: IE1, IE2, IE3 NEW: Design update of the NORD IE3 asynchronous motors. The optimisation of the motor series includes many details that lead to an improvement in ...

Power: 10 W - 270 W
Intensity: 130 mA - 1,400 mA
Torque: 0.07 Nm - 0.96 Nm

Three phase with 2 or 4 poles, totally enclosed with external ventilation. Class F winding. IP65 protection according to CEI EN 60529. Power from 9 to 270 W. Version B5 – B14. On request: motor ...

Torque: 0.0007 Nm - 19 Nm

... 42) - 10 frame sizes Resolution: 1.8° and 0.9°/ step Holding torque: 0.0065 to 19 Nm Winding: Unipolar and Bipolar models Single or Double shaft version Class B (130°C) & Class F (155°C) RoHS compliant Customization ...

... stepping motors, SS serie Main features Square size : 42mm (NEMA17) or 50mm Basic step angle : 1.8° Winding : Bipolar, lead wire type Current per phase : 1 A Customization upon request Key points These ...

Torque: 0.2 Nm - 2.15 Nm

... NEMA 17) and 60mm square (NEMA 23) Resolution: 0.9°/ step Holding torque: 0.20 to 2.15 Nm Current / phase: 1 to 2A Winding: Unipolar and Bipolar models Single or Double ...

Power: 40 W
Intensity: 3 A
Torque: 0 Nm - 0.3 Nm

• Stepper motor with embedded drive and motion controller • Stepper motor with an integrated freely programmable servo controller • High dynamics and efficiency through field-oriented ...

Power: 40 W
Intensity: 0 A - 3 A
Torque: 0.3 Nm

• Stepper motor with embedded drive and motion controller • Stepper motor with integrated freely programmable servo controller • High dynamics and efficiency through field-oriented ...

Power: 40 W
Intensity: 3 A
Torque: 0.3 Nm

• Stepper motor with embedded drive and motion controller • Stepper motor with an integrated freely programmable servo controller • High dynamics and efficiency through field-oriented ...

Intensity: 4, 2, 6.5, 3.3, 6.6 A
Torque: 3.2 Nm - 12.5 Nm
Operating temperature: -20 °C - 50 °C

A series of step motors that have been designed by JVL for use with the entire range of JVL Step Motor Drivers and Controllers. They are high torque step motors especially made for mini- ...

Intensity: 9 A
Torque: 21, 10, 25 Nm
Operating temperature: 0 °C - 40 °C

A series of step motors that have been designed by JVL for use with the entire range of JVL Step Motor Drivers and Controllers. They are high torque step motors especially made for mini- ...

Power: 0.12 kW - 1.1 kW
Intensity: 0.85 A - 8 A
Torque: 0.41 Nm - 5.01 Nm

Operating duty - S1 Rated voltage - 230V Frequency - 50Hz Insulation class - F Mounting arrangement - IM1001 (IMB3 - on feet) Motors are manufactured in the whole range (56...80) as: with standard starting torque with ...

Power: 750 W
Intensity: 2.95, 1.7 A
Torque: 2.48 Nm

Breakdown torque ratio [ 4.2 Winding connection ∆/Y Starting current ratio [ 7.5 Frequency [Hz] 50 Efficiency at 1/4 of full load [ - Efficiency at 2/4 of full load [ 74.6 Rated output [HP] 1.0 Efficiency ...

Power: 3 kW
Intensity: 10.5, 5.8 A
Torque: 9.8 Nm

... connection ∆/Y Starting current ratio [ 8.5 Frequency [Hz] 50 Efficiency at 1/4 of full load [ - Efficiency at 2/4 of full load [ 86.2 Rated output [HP] 4.0 Efficiency at 3/4 of full load [ 87.7 Service ...

Power: 0.06 kW - 110 kW

Three-phase motors and brake motors with high low noise, progressibity and dynamics. They are specifically suitable for coupling with gearmotors minimizing the dynamic overloads deriving ...

Power: 0.75 kW - 375 kW
Intensity: 0.38 A - 231.7 A
Torque: 0.3 Nm - 846.6 Nm

• Three phase squirrel cage induction motors • IEC Metric Motors from 56 to 315 frame size • SMX Series comply with IE2- IE3 efficiency class (regulation EU 2019/1781) • Totally ...

Power: 0.5 W
Intensity: 104, 54 mA
Torque: 0.0001 Nm

CMS07-17 is a Brushed Motor with a diameter of 7 mm and length of 17 mm. Precious metal commutation, Sleeve bearing Brushed Motor. Rated torque(mNm):0.144/0.135 No load speed(rpm):20200/22100 No ...

Power: 0.2 W
Intensity: 117, 182 mA
Torque: 0.0001 Nm

BMN07-12 is a Brushless Motor with a diameter of 7 mm and length of 12 mm. Sensorless, Sleeve bearing Brushless Motor. Rated torque(mNm):0.06/0.06 No load speed(rpm):21300/22300 No load current(mA):120/78 ...

Power: 0.9, 0.8 W
Intensity: 384, 208 mA
Torque: 0.0002, 0.0001 Nm

BMS10-10 is a Brushless Motor with a diameter of 10 mm and length of 10 mm. With Hall sensors, Sleeve bearing Brushless Motor. Rated torque(mNm):0.17/0.15 No load speed(rpm):37900/33800 No load ...

Power: 28 W
Torque: 0.125 Nm
Rotational speed: 2,150 rpm

... or Controller,Encoders Power Motor provides more than 80,000 kinds of Brusheless DC Motor(BLDC) application data for customers to select or reference, and with high-performance driver ...

Power: 350 W
Rotational speed: 0 rpm - 100,000 rpm
Diameter: 70 mm

Sputum Suction Brushless DC Motor 1.Specification -Model:PBL4015024 -Voltage:24V(optional) -Power:350W -Speed:100000±10% 2.Advantage -High Speed; -High Efficiency; -Light ...

Power: 11 W - 403 W
Torque: 0.042 Nm - 1.45 Nm
Rotational speed: 1,200 rpm - 2,750 rpm

... application. The capacitor motor - the concept In comparison to the shaded-pole Motor, the capacitor motor has a better efficiency and generally also a higher starting ...

Power: 0.7 W - 29.4 W
Torque: 0.0026 Nm - 0.108 Nm
Rotational speed: 2,200 rpm - 2,600 rpm

... of powerful shaded-pole motors. The shaded-pole motor up to 30 W is an asynchronous squirrel-cage motor for connection to single-phase alternating current. ...

Power: 1,805 W
Rotational speed: 9,000 rpm

» 3-phase BLDC motor with high-quality rare earth-magnets and integrated commutation electronics » DC voltage is supplied via 2-wires » We distinguish between the 2-/3-wire-version ...

Power: 20 W
Torque: 0.075 Nm
Rotational speed: 2,600 rpm

... Maintenance free during lifetime Ball-bearings and surface cooling by built-in blower for maximum lifetime Three-phase, two-pole design Reversible rotational direction Available in different lengths Can be combined ...

Power: 22 W
Torque: 0.082 Nm
Rotational speed: 2,600 rpm

... Maintenance free during lifetime Ball-bearings and surface cooling by built-in blower for maximum lifetime Three-phase, two-pole design Reversible rotational direction Available in different lengths Can be combined ...

Power: 0.06 kW - 315 kW
Torque: 0.47 Nm - 71.9 Nm
Rotational speed: 716 rpm - 2,940 rpm

Motive motors are built according to international standard regulations; each size throughout the construction forms is calculated with reference to the tables of standard IEC 72-1. Motive asynchronous three-phase delphi ...

Power: 4 kW - 315 kW
Torque: 35.83 Nm - 3,226.35 Nm
Rotational speed: 720 rpm - 2,985 rpm

... lubricators. 4, 6 and 8 poles motors drive end bearings are in fact of open roller type, in order to withstand eventual extraordinary radial loads (see paragraph "components list") provided ...

Power: 0.25 kW - 30 kW

... phase motors specifically designed to work in an ambient temperature of 100°C, like for instance the one of the ventilation of furnaces and dryers, in S1 continuous duty. The used technology finds its origin in EN 12101-3 ...

Power: 100 W
Torque: 0.27 Nm - 0.83 Nm
Rotational speed: 1,700, 1,800, 3,400 rpm

STANDARD FEATURES • Totally enclosed IP-20 rating. • Fan cooled for high output power. • Class "B" insulation system operated within Class "A" limits to prolong winding and lubricant life. • Aluminum center ring and end shields ...

Power: 185 W
Torque: 0.35, 1.01, 1.05, 0.71, 0.33 Nm
Rotational speed: 3,450, 1,700 rpm

STANDARD FEATURES • Totally enclosed IP-20 rating (IP-44 with optional terminal box kit installed). • Fan cooled for high output power (TEFC). • Aluminum center ring and end shields for high thermal efficiency and light weight. ...

Power: 1.6 W
Intensity: 0.11 A
Torque: 0.001 Nm

12ZWC30L-1 is very compact size but it has optimized magnetic circuit. Brushless DC Motor with core winding has high torque density and multipole rotor can provide very strong and dynamic performance. 12ZWC30L-1 ...

Power: 9.2 W
Intensity: 0.65 A
Torque: 0.007 Nm

16ZWC32L-1 is very compact size but it has optimized magnetic circuit. Brushless DC Motor with core winding has high torque density and multi-pole rotor can provide very strong and dynamic ...

Power: 19.9 W
Intensity: 1.2 A
Torque: 0.019 Nm

22mm Brushless DC Motor has Max. 0.019N·m rated torque and 22mm Motor can generate 19.9W capacity of rated power. 22mm motors have Star winding connection. And ...

Power: 13 kW - 110 kW
Operating temperature: 50 °C

Rewindable water-filled motor, NEMA coupling, available both in 2-pole and 4-pole versions; entirely designed and produced by SAER. Exclusive shaft seal system as standard ...

Power: 75 kW - 185 kW
Operating temperature: 50 °C

Rewindable water-filled motor, NEMA coupling, available both in 2-pole and 4-pole versions; entirely designed and produced by SAER. Exclusive shaft seal system as standard ...

Power: 150 kW - 300 kW
Operating temperature: 50 °C

Rewindable water-filled motor, NEMA coupling, available both in 2-pole and 4-pole versions; entirely designed and produced by SAER. Exclusive shaft seal system as standard ...

Power: 0.18 kW - 1,400 kW
Rotational speed: 3,000, 750, 1,500, 1,000 rpm

... Efficiency IE1 – IE2 – IE3 – IE4 The specific percentage yields are indicated on each data sheet. Number of poles 2P – 4P – 6P – 8P Cooling IC411 Mounting type B3 – B5 – V1 – B14 ...

Power: 0 kW - 500 kW
Rotational speed: 1,500, 3,000, 1,000, 750 rpm

... B Frequency Operating at 50/60hz Insulation class Class F Number of poles 2P – 4P – 6P Mounting type B3 – B5 – V1 – B14 – B34 – B35 – V15 Protections 3 x PTC 150°C ...

Power: 11 kW - 90 kW
Rotational speed: 750, 1,500, 1,000, 3,000 rpm

... Number of poles 2P – 4P – 6P Cooling IC411 Mounting type B3 – B5 – V1 – B14 – B34 – B35 – V15 Protections Standard motors equipped with PTC probes from size 71 Standard ...

Power: 10 W
Torque: 0.04 Nm - 0.11 Nm
Diameter: 46 mm

... Kerk, is a rotary stepper motor equipped with a bipolar wiring. It has a power consumption of 10 W, voltage supply ranging from 5 up to 12 V DC, current supply of 1 A, and a maximum operating temperature ...

Power: 12 W
Torque: 0.14 Nm
Diameter: 80 mm

... stepper motor from Ametek. The series is suitable for applications that require accurate positioning with high torque and think packaging. It is offered at a maximum diameter of 80 mm and has thickness which measures ...

Power: 2.7 W - 8.6 W
Torque: 0.0056 Nm - 0.0141 Nm
Rotational speed: 10,000 rpm

... commutated DC motor is a 22 mm diameter unit offered in 3 lengths with continuous output torques of 0.0056 to 0.0141 Nm. Features: Speeds up to 10,000 RPM possible DC ...

Power: 0.12 kW - 0.55 kW
Rotational speed: 750 rpm - 3,000 rpm

Series HE2 2/4/6 poles High efficiency induction motors are the effective and efficient solution to increasingly strict regulations on the reduction of electricity ...

Power: 0.18 kW - 5.5 kW

NERIDRIVE is a range of motors with an integrated Inverter that is electronically designed to withstand high temperatures, substantial workloads and strong vibration. The Inverter built into the motor ...

Power: 0.03 kW - 37 kW
Intensity: 0.3 A - 65 A
Torque: 0.32 Nm - 112 Nm

Series T 2/4/6/8/12/16/32 poles Three-phase induction motors are the effective and efficient solution when transmission of movement in alternating current is needed. Three-phase ...