DN: 25 mm - 100 mm
Pressure: 10, 16 bar
Temperature: 140 °C
... space-free. In addition to passage ball valves and three-way ball valves, also ball valves with rinsing connections and heating jacket are available. ► gap-free sealing ...
DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C
The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. It can withstand extreme working ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 0 bar - 4,500 bar
Temperature: -252 °C - 650 °C
... maximator valves are fabricated from cold-machined stainless steel body. They come in six different designs that can be installed with regulator spindles. Integrated with a non-rotating stem that provides long life and ...
Maximator GmbH
DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F
Pressure piloted 3 Way Valves apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its set-point ...
AIR Logic
DN: 0.063, 0.125 in
Pressure: 0.5 psi - 100 psi
Temperature: 40 °F - 120 °F
Pressure controlled 3 Way Valves apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its ...
AIR Logic
DN: 0.625, 0.125 in
Pressure: 22 psi - 116 psi
Temperature: 40 °F - 120 °F
Vacuum controlled 3 Way Valves apply signal pressure to a diaphragm that is opposed by a spring force. When then vacuum signal force is greater (deeper vacuum = more force) than the spring ...
AIR Logic
DN: 0.125 in - 0.5 in
DN: 6.35 mm - 101.6 mm
Pressure: 100 bar
... , ATEX, SIL. End Connections variety: Wide range of end connections available for assembly on a generic center section in 3 pieces series, standard or full port. Flanged connections comply with ANSI B16.5 with standard ...
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -29 °C - 175 °C
3 WAYS ATEX BALL VALVE WITH ISO MOUNTING PAD - BSP THREADED - L OR T REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316
BENE INOX
DN: 8, 15, 20, 25, 10 mm
Pressure: 500, 315 bar
Temperature: -20 °C - 100 °C
3 WAYS HIGH PRESSURE BALL VALVE - BSP THREADED - L OR T REDUCED BORE - STAINLESS STEEL 316
BENE INOX
DN: 20 mm - 50 mm
Temperature: -20 °C - 70 °C
3 WAYS F/F/F BALL VALVE WITH L BORE (58213) WITH IP68 ELECTRIC ACTUATOR (50844)
BENE INOX
DN: 0.125 in - 0.5 in
Pressure: 0 psi - 150 psi
Temperature: -18 °C - 70 °C
ANVER Slide Valves are manually controlled, 3-way functioning valves that vent the downstream vacuum or pressure when the valve is turned to the OFF ...
... components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● ...
DN: 6 mm - 200 mm
Pressure: max 20.0 bar
Temperature: -20 °C - 160 °C
SISTO-CM210 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere by diaphragm, ...
Pressure: 16, 40 bar
Temperature: -20 °C - 160 °C
... and is connected to valve as per ISO5211 connections and flange connections are F03/F05/F07. It has a working temperature of 20-160 degrees C, working pressures of PN 40 bar (1/2"...11/4") and 16 bar (11/2"...3") ...
Pressure: 16, 40 bar
Temperature: -20 °C - 140 °C
TORK-PAV 904 Series is a pneumatic actuated stainless steel ball valve. This item has 3 or 2 way screwed connection. The actuator has double acting or single acting types. The body is ...
Pressure: 16, 40 bar
Temperature: -20 °C - 140 °C
... steel 3 prats body with 3-way ball valves screwed connection that can be mounted and has two slide flow and the o-ring is PTFE. The w-temperature is -20 up to 140 degrees ...
DN: 0.5 in - 1 in
Temperature: 70 °F - 800 °F
The three-way valve is for modulating control of liquids, gases or steam in either mixing or diverting applications. The unit features one common port and two non-common ports. Each innervalve within ...
DN: 15 mm - 150 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 350 °C
The ADCATrol V253 is a series of three-way globe control valves designed to ensure accurate control in mixing or diverting general service applications. These valves can be assembled ...
DN: 1.5 in - 12 in
Pressure: 16 bar - 100 bar
- Has functions of dividing one-way flow into two-way flow or combining two-way flow into one-way flow. - Has features of S-shape passageway、cage-guided、quick-disassemble ...
DN: 3 mm - 22 mm
Pressure: 0 bar - 413 bar
Temperature: -53 °C - 232 °C
... capability -V-type packing: better seal, ware-resistance,lower torque force -Variety of end connection type available -Valve Seat: PTFE, RPTFE, UHMWPE
DN: 3 mm - 22 mm
Pressure: 0 bar - 207 bar
Temperature: -53 °C - 148 °C
... -V-type packing: better seal, ware-resistance,lower torque force -Variety of end connection type available Features -Valve Seat: PTFE, RPTFE, UHMWPE -End Connection Type: metric and fractional tube fittings
DN: 4, 6, 8, 10, 12 mm
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
Hand Valve turns on and off air pressure to pneumatic devices. Three-directional control valve, which discharges the residual pressure, and two-directional control valve is available. Hand ...
DN: 4, 8, 6 mm
The Burkle 2 and 3-way valves are utilized for transferring liquids or gases in order to release, block, or divert the direction of the flow. The PVDF-transparent framework ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...
Pressure: 320 bar
Flow rate: 40 l/min
Three-way pressure compensated valves, max. working pressure 320 Bar, recommended max. flow rate 40 t./min.
F.lli TOGNELLA
Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min
Pressure: 0 psi - 125 psi
Temperature: -29 °C - 149 °C
... is offered in 2-way and 3-way designs. The 2-way design is a snap action on-off control, while the 3-way design offers the same snap ...
DN: 20 mm - 63 mm
Pressure: 10 bar
... To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according ...
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 95 °C
• Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Step of the ball in T or L • Pressure -PN10 • Available in PVC-U, PVC-C, PP thermoplastic ...
DN: 63 mm - 110 mm
ELECTRO-HYDRAULIC VALVE The valve fully opens or shuts off in response to remote electric signals. TYPICAL APPLICATIONS Irrigation, greenhouses, golf courses, turf, water treatment.
DN: 25 mm - 150 mm
Pressure: 0.6 bar - 10 bar
Temperature: 70 °C
... RAF 31 electric valve is a Normally Closed (N.C) line pressure hydraulically actuated. The RAF 31 (N.C) valve opens when 3-W plastic solenoid valve is energized. The ...
Raphael Valves Industries (1975) Ltd
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: 70 °C
The RAF 7R flow rate control valve is line pressure hydraulically actuated, 3-W plastic pilot. Normally the valve is partly open to allow constante flow rate. The head loss across the ...
Raphael Valves Industries (1975) Ltd
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: 70 °C
... , as set on the 3-W pressure sustaining plastic pilot and a maximum downstream as set on the 3-W pressure reducing plastic pilot. The minimum upstream and the maximum downstream pressure are maintained ...
Raphael Valves Industries (1975) Ltd
DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C
– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Ball valve up to max. 60 bar Actuation up to max. 8.4 bar Materials Brass ...
... 0.059 in] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single ...
... making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
DN: 9 mm
... 0-12mm high vacuum valve (3-way) Accessories: S540008 0-8mm high vacuum plug and control knob Viton® O-ring at tip 37.05 S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 200 °C
Di Nicola manufactures ball valves type floating and trunnion mounted alloy carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content ranging in size and nominal pressures in accordance with ...
DN: 40 mm - 1,200 mm
Pressure: 2.5 bar - 25 bar
Di Nicola manufactures rubber wedge gate valves in ductile iron alloys for over fifty years with sizes and nominal pressure of 2.5 bar till 25 Bar . Di Nicola resilient wedge gate valves are coated with ...
Please specify:
Help us improve:
remaining