... Bighead Bonding Fasteners, is a polyurethane adhesive equipped with a high quality steel applicator gun. It has an operating temperature that ranges from -55 °C to +121 °C. In addition to that, the polyurethane adhesive ...
bigHead Bonding Fasteners
DUAL COMPONENT ADHESIVE tiechem ® G500 is Methyl Methacrylate (MMA) based high performance structural adhesive. Application areas: Adhesive effect is superior on many materials which ...
TIEIG Industrial Group
Dymax offers specially formulated LED light-curable adhesives for use with the BlueWave® LED Prime UVA high-intensity spot-curing system. The adhesives, which range from fast to ultra-fast cure speeds ...
DYMAX Europe GmbH
... warm-up time. The KUPER glue thread is applied in the proven zig-zag method. The temperature regulator is continuously controlling the heat. The pressure used for guiding the hand gluer is sufficient for applying the ...
... or LED systems. The Vitralit® adhesives are the perfect choice for high volume production. The short exposure times allow processing and bonding of temperature sensitive substrates. By thermally post-curing the adhesives, ...
Panacol-Elosol
Henan Jixiang Industry Co., Ltd.
... other substrates for the use of adhesive tape; trademark paper, double-sided adhesive tape and other adhesive products production.
Yongyi adhesive (Zhongshan) Company
Working temperature: 150 °C
Epoxy Adhesives, Dual Pack, Packaging Quantity 5, Heat Resistance Temperature (Max) 150 °C • TE Internal Description: S1125-KIT-1 • Alias #: 7412607182 9-1196836-0 AC-J02557 S1125-KIT-1 • Packaging Method : Dual ...
TE CONNECTIVITY
Polymerization time: 25 min
Packaging: 500, 650 ml
... universal adhesive Safety: Visit our website to see the safety and technical data. General: These adhesives bond metals, rubber, plastics and other materials with and to each other. Bonds strongly in ...
Working temperature: -70 °C - 225 °C
Polymerization time: 5 min
... is difficult to add an adhesive to it. Preparation: The surfaces to be assembled must be clean, dry and free of any lubricant. Adhesive selection: The industrial adhesive that offers ...
... 10% of RFE in the glue (life time: about 30 minutes) •To Put the first layer of glue on the both sides and wait for 12-15 minutes •To Put the second layer of glue on the both sides ...
Working temperature: 100 °C
Windglass Glue is a one component, thixotropic, moisture curing polyurethane adhesive, primarily used for automotive direct glazing with and without airbag. It cures in a longer time allowing application ...
Working temperature: -30 °C - 90 °C
... strain gauge applications, BCM SENSOR supplies strain gauge adhesives, protective coatings and sealants as follows: –adhesives for strain gauge bonding in precision sensor applications; – adhesives ...
Working temperature: 80 °C
Forms a strong, clear bond in seconds. Can be used straight from the container without special preparation.A cyanoacrylate activator can be used to increase speed of bonding What surfaces does it bond? The 473-461 works on a wide ...
Optimize hot-melt adhesive application and performance Our low molecular-weight polymers and waxes dramatically improve the application and performance of hot-melt adhesive (HMA) formulations based on ...
Working temperature: -20 °C - 50 °C
... without any compromises regarding visual and physical durability. For that purpose, HERMA has developed a special range of adhesives that is suitable for many substrates. It allows labels to reliably perform their task, ...
HERMA GmbH
ZIRCAR Ceramics’ Organic Adhesive Type OA-1 is a soft, water-based polyvinyl acetate adhesive that is used primarily to bond ceramic fiber paper to castertips and in the fabrication of end dams used in ...
ZIRCAR Ceramics
Adhesive basis:CR (polychloroprene) Working temperature:from -20 to +100 °C Dynamic viscosity:3000 mPa·s Colour:yellowish, dull Consumption:per side min. 150 g/m² Product description:contact adhesive, ...
APSOparts®
CORAL GLUE Cyanoacrylate Based Glue 5g / 0.18oz×20PCS ● 100% Reef Safe ● Can be used underwater ● Thick viscosity formula
... integrity in automotive exterior lighting. Gore’s automotive adhesive vents for lighting are known for their reliability and durability: many millions have been installed globally. And all our adhesive ...
General description PPAG-120S is a 120μm synthetic paper coated with Eco-solvent ink receptive coating and with self-adhesive of acrylic, It is with good ink absorption and high resolution. So it is idea for large-format ...
M25 EPOXY TRANSPARENT GLUE FOR GRANITE Extraordinary adhesive strenght, high chemical resistance, flexibility, weather stability. Outdoor application. Mix 20% by weight or 5:1 by volume with C07.
ICR Spa
A polyester adhesive for creating sandwich structures from balsa wood, PUR and PVC foam. It may also be used to bond components made of wood, plywood, glass fibre and other materials, but only in locations which do not ...
Novol Sp. z o.o.
Devcon plastic welder adhesive kit Epoxy kit for field installable connectors, 10 g epoxy with 10 ml syringe
Please specify:
Help us improve:
remaining