Adjustment valves

Pressure: 350 bar
Temperature: -18 °C - 105 °C

Connect one end to a Quick-test hose and the other to the process connection then turn the knob to control the pressure • Easily control pressure of a closed system • Fine tune pressure to a precise number • Easily attach ...

Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C

... lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.

THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...

DN: 20 mm - 80 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 60 °C

... modulating valves Modulating valves LMV are used in combustion processes that require linear adjustment of air or gas flow. The flow varies proportionally to the opening angle of inner ...

DN: 10 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C

... certified) Sturdiness: valve bodies made from solid bar Easy maintenance without the need for special tools Maximum versatility: suitable for different applications and products Maximum safety BBZS1 and BBZS5 by-pass ...

DN: 1.5 in
Pressure: 15,000, 10,000 psi
Temperature: -5 °C - 50 °C

... system is supplied as standard; it consists of two pressure sensors across the throttling valve and a rotary variable differential transformer (RVDT) to provide valve position. Processing at the system ...

DN: 0.25 in
Pressure: 3 bar - 10 bar
Temperature: -10 °C - 50 °C

... through the adjustment needle valve. The piston opens the main valve when the downstream side of the valve reaches approximately 60% of the supply pressure. The ramp ...

DN: 63.5 mm
Pressure: 207, 276 bar
Flow rate: 19, 38 l/min

... at priority port 3, or bypass port 2 Features Two valve functions in one, industry-common cavity. Adjustments cannot be backed out of the valve. Relief valve adjustments ...

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from ...

Pressure: 240 bar

... one. Therefore, a four valve block, as an example, can actually serve anywhere between four and eight bearings. DM series valves always have one discharge port per valve section located ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min

... the excess flow is By-Passed across a relief valve. Porting: SAE, BSPP & NPTF Pressure compensated to ensure a constant flow rate under varying pressures Knurled knob enables fast, accurate adjustment ...

DN: 40 mm - 80 mm
Pressure: 0.5 bar - 10 bar

... BERMAD Top Pilot Pressure Reducing Control valves offer top performance, compact design, and intuitive plug-and-play operation, thanks to an innovative integrated pilot, equipped with a high-resolution adjustment ...

DN: 250 mm - 3,000 mm

The dapò valves are widely used where a regulation of the flow rate or a partialization of the air flows is required. Dapò adjustment valves with diameters from 250 mm up to 3000 mm are ...

DN: 2 in - 8 in
Pressure: 16 bar
Temperature: 0 °C - 120 °C

... the pipeline is completely blocked, a stop occurs flow, with partial flow - adjustment. The tightness of the gate valve in the closed state is ensured by pressing the gate valve to the ...

DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C

... performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease of actuation means ...

DN: 80 mm - 800 mm
Pressure: 16 bar - 63 bar
Temperature: -45 °C - 525 °C

Control valves for applications that require tight cut-off and low adjustment requirements in various industries. Features Triple eccentric and conical sealing structure; sealing pair that will ...

DN: 80 mm - 1,800 mm
Temperature: -196 °C - 550 °C

... shaft and dust-proof seal design. 2. Life cycles may up to 50,000 cycles with no jamming and packing adjustment. 3. Triple-Offset butterfly valve provides laminated seat and solid metal seat as well. ...

DN: 10 mm - 150 mm
Pressure: 10 bar - 63 bar
Temperature: -196 °C - 200 °C

... to standard EN 12266-1; part 2 Design options: – adjustment for actuator, flange according to ISO 5211 – seal elements change possible – in the case of manual lever control the ball valve can ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 180 °C

BALL VALVE 2 PIECES, FULL BORE, BSP THREAD LOCKING DEVICE Features: •Ball valve KTN 1112K BSP thread AISI316 Stainless steel body •Seats: PTFE + 15%FV •Sphere and stem: AISI 316 Stainless steel. •Size: ...

DN: 1, 1.25 in

Valves with a shut-off arrangement in the form of a curtain by means of a slide and connected to pipelines to stop the fluid in the pipe. Thanks to the screw shaft mounted inside the body, the valve is ...

DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C

... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment ...

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... and AF6 for on-off service and insure long life on valve seats. Regulating tip stems are available at no additional cost, add - REG to the catalog number. Glands and sleeves are supplied with each valve ...

Pressure: 20, 60 bar

The flowcontrol needle valve used at the gas inlet of the machine or the wire feeder gives full flow adjustment and is available at the work place regardless of distance to the gas cylinder/gas outlet.