Aggressive media pumps

Flow: 43 m³/h
Pressure: 2.5 bar

... centrifugal pump, manufactured by DAB, has a maximum ambient temperature is +50°C. It has a maximum operating pressure of 2,5 bar. It contains pumped fluid which is contaminated with suspended particulate. The fluid ...

Flow: 45 m³/h
Pressure: 8 bar
Head: 24 m

These pumps combine the advantages of an open impeller with those of the AISI 316 stainless steel construction, which is particularly suited for handling moderately aggressive liquids with suspended solids.

Flow: 0.05 l/min - 6.5 l/min
Pressure: 6, 4, 15 bar
Fluid temperature: 0 °C - 95 °C

... Series gear pumps were designed from scratch to be everything a gear pump should be: durable, leak-free, reliable, chemically inert and quiet. The Silencer Series precision gear pumps ...

Pressure: 0 bar - 320 bar

... benefiting from the best combination of reactors and pump flanges from both a technical and economical perspective. The new gear geometries facilitate differential pressures of up to 320 bar for selected pump ...

Flow: 3 m³/h - 250 m³/h
Pressure: 16 bar
Head: 9 m - 100 m

Horizontal or vertical seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry, casing connecting dimensions to EN 733, ...

Flow: 3 m³/h - 250 m³/h
Pressure: 0 bar - 16 bar
Head: 9 m - 100 m

Horizontal or vertical seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry, casing connecting dimensions to EN 733, ...

Flow: 12.5 l/min
Pressure: 120 mbar

... materials •Handles aggressive liquids •High efficiency, low power consumption •Maintenance Free •Quiet •Continuous Rated •Ignition Protected Flow rate: Nominal 12.5 Litres/min (2.7 gallons/min) at 0.12bar (1.68psi) Pumps ...

Pressure: 160 bar
Power: 0.18 kW
Fluid temperature: -30 °C - 60 °C

The ZP4000 pump is used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as a delivery pump for lubricant in progressive systems.

Flow: 145 l/min
Pressure: 8 bar
Fluid temperature: 65 °C

Diaphragm pump in polypropylene series PPB-1 with 1" flanges, membranes and balls in Hytrel® and seats in AISI 316 stainless steel FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE | WINDSHIELD FLUID | WATER | DIESEL FUEL | ...

Flow: 1,600, 1,200 l/min
Pressure: 1.6 MPa
Head: 80, 85 m

The MTFO series is characterized by its wide power range of up to 22kW. The open impeller enables also applications with a solids content of up to 30%.

Flow: 70,000 l/h
Pressure: 1,000, 400 bar

... diaphragm pump combines the reliability of the Bran+Luebbe diaphragm technology with a compact unique gearbox design. Features The NOVAPLEX Vector process diaphragm pump combines ...

Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW

The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the ...

Flow: 45 l/s
Head: 850 m
Power: 92 kW

... mixed flow and radial submersible pumps made entirely of microcast stainless steel, including impellers and diffusers. Designed to ensure top performance in any aggressive environment, even marine. They ...

Flow: 2,000 m³/h - 5,000 m³/h
Pressure: 16 bar - 150 bar

Leistritz screw pumps of series L4 are twin screw double volute, self-priming positive displacement pumps for low, medium and high pressure duty, suitable for transport of abrasive/non abrasive, corrosive/non ...

Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m

Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling corrosive, aggressive ...

Flow: 0 us gal/min - 725 us gal/min
Pressure: 0 psi - 580 psi
Head: 0'00" ft - 1200'00"

... Smart Pump and Packaged e-SV Hydrovar e-SV Pump The e-SV fabricated vertical multi-stage pump is an energy saving, non-priming pump coupled to a standard premium-efficient ...

Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C

The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 0 m³/h - 500 m³/h
Pressure: 0 bar - 150 bar
Head: 0 m - 120 m

... maintenance for use continuous (abandon of mechanical seal pumps) Design features Pumps of the series CNV MAG-M are vertical single-stage volute casing pumps with closed impeller. Close ...

Flow: 0.2 l/min - 3 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...

... climatisation sets, agricultural applications. Suitable for use with clean, aggressive liquids that are chemically compatible with the materials from which the pump is made. The pumps ...

The Beaver 75 Air Pump is a double diaphragm air pump and is available with a combination of aluminium, cast iron, or stainless steel wetted parts and center section with a choice of elastomer option ...

Flow: 0.25 m³/h - 130 m³/h
Pressure: 24 bar

... of the compression zone. Optimum filling of the conveying elements through a cylindrical/conical compression zone Compact design with directly flange-mounted drive (block design) Design also available with ...

... S1 (continuous) service. SUBMERSIBILE PUMPS IN STAINLESS STEEL AISI 316, DUPLEX SUPER DUPLEX, HASTELLOY, ALLOY The submersible electric pumps in stainless steel AISI 316 are mainly used for lifting ...

Flow: 700 m³/h
Pressure: 3.1 bar
Head: 31 m

... Capacity.:36-5040m?h Head:5-80m Design and Unique Features 1. The SG and SGH pump is a horizontal cantilevered single casing centrifugal pump. 2. Construction of the pump is single ...