- Hydraulics - Pneumatics >
- Filter and Separator >
- Air filter
Air filters
Flow: 0 m³/h - 30,000 m³/h
General Features Elements are assembled by the help of a tie-rod system. Two external float drains are employed for excellent drainage. Pre-separation zone has a unique design. All connection zones are strongly welded. ...
Operating pressure: 2 bar - 10 bar
Flow: 0.6 m³/min - 36 m³/min
... optimal pipeline design to minimize the pressure drop of air flow, design with the most suitable working pressure and inlet temperature based on different horse power to enhance the efficiency of air compressors.
To use with half mask Climax mod. 755 and mod. 756. Available filters: 756 A1P3 R D 755 A2P3 R D 756 ABEK1HgP3 R D 756 ABEK1P3 R D Normative EN 14387:2004+A1:2008
Cost effective filters for protection against particulates with low profile angle for minimum visual impairment. Cartridges have an integral maintenance free disposable inhalation valve. Easy to attach to the respirator ...
Operating pressure: 1.5 bar - 9 bar
Air filter for use with TS250 and TS350 dispensers. Compact design Protect air operated devices by removing liquid and solid contaminants Can be disassembled without ...
Filters to be used twin on half masks TP2000R, TP2000S and pre-assembled kit, on full face mask BLS5250 and BLS5500. Certified according to EN 14387 and EN 143 standards.
Flow: 20 ft³/min - 21,250 ft³/min
Dirt, rust, pipe scale, water and lubricant are all by-products of compressed air generation. Left unfiltered, this abrasive stream of contaminants will compromise the operation, integrity, and usable service life of ...
FILTERS TO USE IN PAIR BAYONET CONNECTION - FILTERS BLS 200 SERIES CERTIFICATION EN 14387 AND EN 143
B.L.S. S.r.l.
Filters with a synthetic resin housing and a screw complying with EN 148/1. For use with POLIMASK® 330 and POLIMASK® 2000 Alfa half masks, or IDEA, SFERA, C607, SELECTA full face masks.
D.P.I. s.r.l.
IRUDEK 2000 S.L.
... pulp and paper manufacture, foundries, and smelters. Features 100% PVC-Free®. Use with #8910 N95, #8970 R95, or #8940 P100 filters against particulates.
... resistance of the filter cotton reaches more than 200Pa, the filter cotton must be replaced. If the filter cotton is washable, change the filter material under, can be ...
Dongguan Yuexin Industrial Company
Operating pressure: 0.5 Pa
Filtration size: 5, 40, 80 µm
Flow: 660 l/min
Vacuum Filter – AFJ-D Remove impurities from your vacuum air flow Get rid of water and dirt – Selectable nominal filtration rating: 5, 40 or 80 μm Use it in high flow rate applications – Up to 660 ...
FPT Industrial blow-by filters reduce emissions into the atmosphere and oil consumption, capturing oil mist and contaminants, ensuring clean air circulation and reducing engine wear. HOW IT WORKS Part ...
Filtration size: 0.075 mm - 0.6 mm
VEA series internal cap filters are specially designed for 3/8 nozzles. They protect nozzle spray tips. We recommend fitting filters on low-flow nozzles to prevent clogging and improve performance.
VEF threaded filters are specially designed for 1/4″ J series flat fan nozzles and RX/RZ hollow cone nozzles. They provide a top filtering action and protect nozzle tips. We recommend to assemble threaded ...
Operating pressure: 0.5 bar - 20 bar
Filtration size: 5, 20, 50 µm
Flow: 14,000 l/min
• Double filter action: air flow centrifugation and filter element • Available in 4 sizes and connections from 1/8” to 1” • Filtering cartridge made of HDPE available ...
Construction characteristics • Body, bowl and internal components in AISI 316L stainless steel. • A4 (AISI 316) stainless steel fixing screws. • Manual or automatic condensed drain
Filtration size: 10 µm
... provides a complete line of highly efficient blower filters, silencers, and filter-silencers for use on TBA Turbo Blowers or any conventionally designed blower. These units offer not ...
Filtration size: 5, 35 µm
• Nylon vacuum filter • Polyethylene filter cartridge • Prevents impurities from reaching the vacuum pump • Threaded connections for easy installation
Filtration size: 40 µm - 170 µm
Flow: 2.5 us gal/min - 12.9 us gal/min
Fluid temperature: 80 °F
Insert style safety screens feature an integral locking end that uses our field-proven insert principle of controlled expansion during installation to lock and retain the screen in place. A pre-installed expander pin is simply pressed ...
Operating pressure: 0 MPa - 24 MPa
Filtration size: 40 µm - 300 µm
Flow: 0.1 l/min - 100 l/min
Cartridge-style safety screens are designed to slip into a drilled flat-bottom hole and be retained by a secondary means. The Lee Company offers a separate retainer for the 5.5 mm and 8.0 mm sizes. These screens are constructed of all ...
Filtration size: 4 µm - 170 µm
Flow: 1 l/min - 92.364 l/min
Fluid temperature: 80 °F
Press-in style safety screens are specifically designed for easy installation into plastic housings and fittings and use our unique barbed design that provides easy press-in installation while ensuring retention. These components are ...
Operating pressure: 18 bar
Filtration size: 0.01 µm
Flow: 118 m³/h
The DeVilbiss FinishLine range of air filter regulators and coalescers are manufactured to ensure optimum air flow and precision control. Units Available: FLRC-1 – Filtration down ...
Operating pressure: 18 bar
Filtration size: 0.01 µm
... range of air filter regulators and coalescers are manufactured to ensure optimum air flow and precision control. FLRCAC-1 – Filtration down to 0.01 microns plus activated carbon filter ...
Flow: 0.4, 1.2 us gal/min
Binks line of high pressure filters Keep high pressure fluid handling equipment free of contaminants Filters help prevent the spread of dirt contamination in your paint line that can cause blockages in ...
... enters the lower filter chamber and is removed as air flows through the filter cartridges. The clean air then flows upward into the clean gas chamber. The filter ...
Filtration size: 0.5 µm
... microns (0.02mils) and odour from the compressed air stream providing clean and breathable air for your operator’s safety. Air Pressure Control Both the standard ...
Filtration size: 2 µm
... a replaceable polyester fleece cartridge filter with a filter surface area of 2.5 m², which filters out particles up to 2 µm from the conveying air of the material-carrying ...
Operating pressure: 100 psi
Filtration size: 40, 43, 5, 20, 10 µm
... tubing. Features Sintered or wire mesh screen filter element Captured O-Ring face seal for leak tight installation 303 or 316 Stainless Steel body with 316 Stainless Steel filter
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining