DN: 0.125 in
Voltage: 230, 24, 115, 48 V
Temperature: -10 °C - 130 °C
Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 0.25, 0.125 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 130 °C
Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 0.125, 0.25 in
Voltage: 115, 230, 24 V
Temperature: -10 °C - 130 °C
Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 0.75 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C
... Series TORK dust collector valve, pulse solenoid valves are normally closed position. (shaker valves, diaphragm valves are another names of pulse valves) ...
SMS-TORK
DN: 0.75 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C
PL1020 REMOTE CONTROL PULSE SOLENOID VALVE, NORMALLY CLOSED Application : Compressed Air , dust collector services Size : 3/4"..3" Working Pressure : 0,5…8 ...
SMS-TORK
DN: 20 in - 40 in
Voltage: 12 V - 230 V
Temperature: -40 °C - 120 °C
Application : Compressed Air , dust collector services Size : 3/4”, 1", 1 ½” Working Pressure : 0,5…8 Bar Coil, Tube : Stainless Steel Body : Aluminum Seal : Thermoplastic Fluid Temperature : -40°C…120 °C Position ...
SMS-TORK
DN: 0.125 in
Voltage: 12 V - 220 V
Temperature: -10 °C - 60 °C
... seals 6 bar flow rate with Δp 1 bar30 Nl/min Minimum power3W - 5VA Manual controlBISTABLE Torque of tightening the nut solenoid0.6 Nm
AIGNEP
DN: 0.05 mm - 2 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C
Orifice size from 0.05 to 2 mm. Media: gas or liquid Pressure range from vacuum up to 70 bars Applications: flow and pressure regulation, Venturi, vacuum Manifold mount, barb or flange on request Stainless steel or brass, FPM, EPDM, ...
DN: 1.2 mm - 3 mm
Voltage: 12 V - 24 V
Pressure: 0 bar - 10 bar
Precision PWM spraying valve for lightly aggressive liquids. It is used for proportional control of liquids. Up to 100 Hz and 150 million cycles with Gevasol driver. Switching time in less than 5 ms to open or close ...
DN: 10 mm
Voltage: 24 V
Temperature: 5 °C - 50 °C
Quick fitting exhaust port type Possible to exhaust with tube piping, from the 3(R) port of the piping block. Its simple configuration makes assembling the manifold a breeze. Instant assembly -»quick delivery All are integrated ...
Koganei Corporation
DN: 12 mm - 50 mm
Voltage: 12 V - 230 V
Temperature: -27 °C - 80 °C
Series 2/529 - Solenoid valve for hydrogen H2 and high pressure applications 2/2-way servo-operated piston valve - ATEX 2/2-way solenoid valve NC ...
ALPHA AUTOMATISMES Sarl
DN: 8 mm
Voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C
... 071 - Solenoid valve for hydrogen and very high pressure applications 2/2-way solenoid valve with servo-controlled piston - ATEX 2/2 way valve NC ...
ALPHA AUTOMATISMES Sarl
DN: 1 mm - 8 mm
Voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C
Series 8/100 - High-pressure solenoid valve for hydrogen, pneumatically operated 2/2-way valve, with piston, direct pressure operated - ATEX NC ...
ALPHA AUTOMATISMES Sarl
Voltage: 22 V - 26 V
Temperature: 5 °C - 50 °C
Pressure: 0 MPa - 1.1 MPa
... external pilot air specification, controlling air pressure from 0MPa is possible. Body height is 42mm. 9 valve types Easy replacement of input /output port The cartridge fitting ...
Voltage: 24, 100 V
Temperature: 5 °C - 50 °C
Pressure: 0.2 MPa - 1.1 MPa
... area of 18mm2 for 16mm width valve is secured. Various valve types are available. 2 selections of connector lead-out direction: (Top and Side) Vacuum-operatable 2/3 Port Solenoid ...
Voltage: 22 V - 110 V
Temperature: 5 °C - 50 °C
Pressure: 0.2 MPa - 1.1 MPa
Standard type Solenoid Valve designed to place importance on basic functions. Equipped with push & lock manual button as standard specification. It enhances operational efficiency during maintenance ...
DN: 8 mm
Voltage: 6 V - 240 V
Temperature: -10 °C - 50 °C
Series of spool valves with hard anodized aluminum body, with static seals and high flow for NAMUR interface mounting. Available according to ATEX 2014/34/EU, in calssifications Ex nA, Ex ia, Ex dm, Ex d, Ex mb. For ...
DN: 8 mm
Voltage: 22 V - 28 V
Temperature: -25 °C - 70 °C
Series of valves with NAMUR interface in stainless steel AISI 316L, especially suitable for food, chemical, pharmaceutical, OIL&GAS and mining industry. Conforming to 2014/34/EU Directive, certified II 2Gc IIB T5 / II ...
DN: 0.5 in - 2 in
Temperature: 180 °C
Pressure: 0.3 bar - 16 bar
... the valve. Pressure Source: A compressed air tank or high pressure gas source is connected to the pneumatic valve. Compressed air ...
DN: 1.2, 1.5 mm
Voltage: 24, 12 V
Temperature: -10 °C - 50 °C
Direct control valves 2/2 or 3/2 are used for operation of pneumatic cylinders with little bore size or for auxiliary functions. Available in the version with solenoid operation , with ...
DN: 15 mm - 50 mm
Voltage: 230, 24 V
Temperature: 50 °C
... the pilot valve can be easily removed after loosening the union nut (8) -with the system without pressure-. The magnet is fixed with a blind nut (15). This one can rotate freely in front of the valve ...
DN: 10 mm - 20 mm
Voltage: 230, 24 V
Temperature: 50 °C
... Direct-acting thermoplastic valve • Fast change • Core tube sealed by PTFE bellows • Independent of compressed air supply • Wide area of application • Pilot operation. Function • ...
DN: 0.125 in - 2 in
Temperature: -10 °C - 140 °C
Pressure: 0.1 bar - 20 bar
... Brass housing (CW617N) Valve seat made of brass (CW617N) Interior components made of stainless steel Sealing material made of NBR or FKM Thread Cyl. thread, DIN EN ISO 228 Application Compressed ...
DN: 15 mm - 98 mm
Voltage: 110, 12, 230, 24 V
Temperature: -30 °C - 180 °C
Port Refer below technical data sheet (Available BSP / NPT) End Connection Screwed / Flange Body Material SS ASTM A351 Grade CF8 / CF8M Circumstance Temp-10° C to 70° C Main Features Internal Parts are in superior corrosion ...
UFLOW AUTOMATION
DN: 1.5, 1, 2, 2.5 in
Voltage: 230, 110, 24, 12 V
Temperature: -10 °C - 90 °C
Pulse Jet Angle Type Dust Collector Valve Valve Information Port:Refer below technical data sheet (Available BSP, NPT & Dresser Nut) End Connection:Screwed Body Material: - ...
UFLOW AUTOMATION
DN: 0.5 in - 2 in
Voltage: 24, 12, 230, 110 V
Temperature: -30 °C - 180 °C
Semi Lift Diaphragm Operated Solenoid Valve Normally Open Valve Information > Port: - Refer below technical data sheet (Available BSP / NPT) > End Connection: - Screwed / Flange > ...
UFLOW AUTOMATION
Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 2 bar - 8 bar
Expressly developed for high-density sorting and recycling applications, the compact 820 ISD Series offers outstanding characteristics in terms of response time and life expectancy. The integrated 24 VDC miniaturized speed-up driver with ...
MATRIX mechatronics
Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 5 bar
The 580 Series solenoid multi-valves are 2/2 NC type. The research about materials and new technological solutions allowed the realization of a shutter solenoid multi-valve ...
MATRIX mechatronics
Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 8 bar
The 840 Series Pneumatic Solenoid Valves is of the 2/2 NC Type. Its innovative and advanced design gives the realization of a shutter valve with a very smooth operation ...
MATRIX mechatronics
DN: 1 mm - 5.5 mm
Temperature: -10 °C - 140 °C
Pressure: 40 bar
The 21M-4144 is a 2-way direct acting general purpose solenoid valve, manufactured by Ode, that is designed to be utilized for the blocking of fluids compatible with the construction materials. Minimum ...
ODE
Temperature: 0 °C - 50 °C
Pressure: 3 bar - 10 bar
... shut off the air supply while relieving the downstream circuit by a remote electric control. *Available with MICROSOL type or in compliance with CNOMO standards (to be ordered separately). *Available ...
Aircomp by Stampotecnica
DN: 8 mm - 150 mm
Voltage: 12, 24, 110, 120, 230 V
Temperature: -15 °C - 60 °C
VMR VMR60 Safety solenoid valves for air and gas, fast opening and fast closing type The VMR type valve is a fast opening solenoid ...
Elettromeccanica Delta S.p.A.
... standard, the Explosion-proof solenoid valve series can be installed directly on the air source interface of single acting or double acting pneumatic actuators. Due to ...
... , the 5 way 2 position solenoid valve series can be installed directly on the air source interface of single acting or double acting pneumatic actuators. Due to its unique ...
... , the 3 way 2 position solenoid valve series can be installed directly on the air source interface of single acting or double acting pneumatic actuators. Due to its unique ...
DN: 1.14, 0.76, 0.51 mm
Voltage: 5, 12, 3, 24 V
Temperature: 0 °C - 50 °C
... The X-Valve® is a miniature pneumatic solenoid valve measuring only 8 mm in width and is the ideal solution for portable applications with limited space and power. The ...
Parker Precision fluidics Division
DN: 0.5, 1, 1.5, 2 mm
Voltage: 12, 24 V
Temperature: 0 °C - 50 °C
... in the C Series cartridge style valves at 15 mm. Available in 2 and 3-way normally closed configurations. This fast and reliable valve is ideal for life science applications. The C15 is a cartridge ...
Parker Fluid and climate Controls Europe
DN: 0.625 in - 2.125 in
Voltage: 24 V - 240 V
Pressure: 450 psi - 650 psi
... de-energized the valve diverts refrigerant to the normal condenser. When the coil is energized the valve diverts refrigerant to the reclaim condenser. Two other applications are for split condensers ...
Parker Sporlan Division
DN: 0.5 in
Voltage: 24, 120 V
Temperature: -15 °C - 50 °C
... to use different size valves on one manifold without a transition kit to maximize cost savings and reduce space • Pneumatic zoning allows for multiple pressure zones in one manifold for different working ...
Parker Pneumatic Division Europe
DN: 0.25 in
Voltage: 14 V - 24 V
Temperature: -45 °C - 80 °C
Special features • - Solenoid valve • - High level of operational reliability due to the solenoid with armature and booster valve with ball/seat • - Attachment ...
SAMSON
DN: 0.063 in
Voltage: 12 V - 240 V
Temperature: -10 °C - 50 °C
... reduce installation time. Maximum Cv is 0.07. •Normally Closed type, class B coil •Power consumption 2.5w •Seal: NBR (for air and water) or FKM (for medium vacuum)
SMC Corporation of America
DN: 10 mm - 75 mm
Voltage: 230 V
Temperature: -5 °C - 120 °C
SPECIFICATIONS : Sizes 10mm (3/8") to 75mm (3") End Connections Standard-BSP, Optional-NPT. Construction-Body Upto 20mm (3/4") Brass Forged IS 6912 and above in SS ASTM A351 Gr. CF8 ...
Avcon Controls PVT. Ltd.
Please specify:
Help us improve:
remaining