Air valves

... fracture of the pipeline. Automatic air admission for larger pipelines Large cross section for maximum air inlet Coated with EKB Design and dimensioning depending on working conditions Additional TWIN-AIR ...

DN: 127 mm
Pressure: 5 bar
Temperature: -40 °C - 246 °C

The newly released 7001 series Air Intake Shut-off valve was designed for the wear and tear of the frac industry. The valve will effectively shut down a runaway diesel engine by closing ...

DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C

... seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C

... off the flow of gas as the pressure increases or decreases below the affixed rate. The sleeve type valve does not need outer bypass in opening the valve. It has various Pressure Equipment Directive 97/23/EC ...

Complete with pressure gauge. Adjustable 0 - 10 bar. Metal design with fixing bracket.

Pressure: 1 bar - 8 bar
Temperature: -10 °C - 60 °C
Flow rate: 500 l/min

... identifies a 3/2 N.C. amplifier valve that changes low pressure signals into pneumatic signals (1 ÷ 8 bar).Valve type "XVF5" is instead a 3/2 N.O. amplifier valve that ...

DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C

Sealing form 1 - 3 Shape A Connection 1 - 3 BSP cylindrical internal threads Bore L shaped Contact travel 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, ...

DN: 10 mm

... CONTAMINATED AIR • UNIQUE MOUNTING The BV10 represents yet another evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. ...

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 450 °C

... . Read this instruction carefully before installation, and check valve type, size and technical parameters. 2. It is strictly forbidden to Weld flanges after installing valves. The valve ...

DN: 40 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -15 °C - 130 °C

Body material Cast iron GG25 Disc material Ductile iron PN (end) PN10/16-ASA150-JIS10K Connection between flanges Contact sealing Heat EPDM Operating system Lever

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C

SPECIFICATIONS ; • - Long neck for isolation • - ISO 5211 mounting pad • - Wafer type • - Between flanges PN1Û/16 from DN32/40 to 400 and Class 150 (PN20) from DN40 to 400 (over on request ) • - Betwwen flanges PN10 from DN45Û ...

DN: 0.125, 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C

Quick exhaust valve enabling high purge speeds to be reached (valve technology) directly on the wiring circuit or cylinder supply port.

DN: 0.5 in - 4 in
Pressure: 16 bar

... attached to it closes or opens the passage hole in the housing. WARNING: The use of shut-off valves as control valves is prohibited.

DN: 100, 125, 160, 200 mm
Flow rate: 36 m³/h - 180 m³/h

FOR EXTRACT AIR Circular disc valves with manually adjustable annular gap Nominal sizes 100, 125, 160, 200 mm Volume flow rate range 10 – 50 l/s or 36 – 180 m³/h Diffuser face made of formed sheet ...

DN: 80 mm - 250 mm

Valves are produced of steel sheet powder painted glossy white acc. to RAL 9016 or of chromium coated sheet. They are available in diameter range from 80 to 250 mm and depending on a type are delivered with or without ...

DN: 0.25 in - 2 in
Pressure: 0 psi - 125 psi

... Blow-out proof stem design Adjustable packing gland Specifications Vent downstream air in accordance with OSHA regulation 1910.147 for pneumatic systems

Pressure: 0 psi - 220 psi
Temperature: 0 °C - 60 °C

Inlet NPT : 3/4" Max Pressure : 0-220 PSI Mesh Size : 2.5-3 Outlet NPT : 3/4" Temp. Range : 33-140°F

DN: 0.5, 0.75, 1 in
Pressure: 16 bar
Temperature: -10 °C - 120 °C

Automatic Air Vent Valve Working Pressure and Temperature Working pressure PN16/Class125. Temperature from -10*C to 120CC.

Pressure: 200, 300 bar
Temperature: -20 °C - 65 °C

Key advantages - High pressure brass cylinder valve for Breathing Air service - Permanent gas tight seal - Choc resistant - π marking according TPED directive - Tested according EN ISO 10297

DN: 6 mm - 12 mm
Pressure: 40, 50, 45 bar
Temperature: 60 °C

designated for control of quick-acting valves – design including or without regulating valve – suitable for single or double acting operating – meets all tests for use in nuclear energetics – medium ...

DN: 40 mm - 200 mm
Temperature: 80 °C

Ari Valve for drinking water and neutral liquids up to 80°C Design features The air release component releases entrapped air in pressurized systems Air & vacuum ...

DN: 0.25 in - 0.5 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 80 °C

... See table Temperature rangeFluid : 5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass, Stainless Steel AISI 316 Seals: NBR MediaAir, gas, water, fuel, oil etc

Pressure: 0 mbar - 1,000 mbar

Rectangular Transfer valves HTC vacuum rectangular transfer valves use directly actuating technology. Valve body is appropriate size and compact design. All moving parts are located ...

DN: 1 in - 6 in
Pressure: 2 psi - 150 psi

... Combination Air Valve (ASU) Design Features: APCO Single Body Combination Air Valves (ASU) can be used for clean or dirty services. The unique venting design provides ...

Plug valve features a cylindrical or conic disc that controls the flow of the fluid, opening and closing the passageway between the opposite ports. The lever to control the valve is placed at the top ...