Aluminum adhesives

Working temperature: 10 °C - 35 °C
Packaging: 300 ml

Sikaflex®-298 is a slightly thixotropic 1-component polyurethane adhesive which cures on exposure to atmospheric humidity. It is used for Teak deck bedding. Sikaflex®-298 meets the regulations set out by the International ...

... service • Old gasket material can be removed in minutes with a putty knife Suggested Applications • For use on machined aluminum metal components; transmission pans, transmission case covers, transaxle ...

Working temperature: -50 °C - 150 °C
Packaging: 30, 500 ml

Cyanoacrylate adhesive for special requirements | high viscosity | longer cure time | odourless and little to no blooming It is less susceptible to moisture effects after curing. WEICON Contact VA 1403 is suited for ...

... high-strength 2-part adhesive in the practical twin cartridge with static mixing tube achieves constructional force-locked connections with an excellent heat and weather resistance. Because of its wide adhesion spectrum, ...

... contaminants. Application: apply the adhesive by brush, spatula or roller spreader an even coat onto one of the surfaces. With strongly absorbing or particularly hard materials apply on both the surfaces. The adhesive ...

Working temperature: -40 °C - 120 °C

1K PU Windshield Adhesive Description: Quick thru-cure 1K Urethane for installing windshields and other stationary glass panels. Drive-away-times (cars): 1-2 hours (without and with double-sided airbags, operating ...

Working temperature: -40 °C - 80 °C
Polymerization time: 12, 24 min

Hot melt adhesives exist in solid form and are classified by different types of raw materials. Polyurethane (Polyurethane Hot Melt Adhesive) is a reactive type of hot melt adhesive for ...

Colour, green Recommended especially for inert materials (e.g. stainless steel or aluminium) or large gaps Accelerates the hardening of STALOC anaerobic adhesives (threadlockers, retaining compounds, ...

Working temperature: -30 °C - 95 °C

... Shipping Port:Guangzhou or Hongkong Lead Time：20 days The spray contact glue is of strong bonding strength, long tack range and excellent spraying performance.Foam spray glue adhesive ...

Applications : This adhesive can stick the same and different kind of materials , including steel , iron , aluminumm , titanum ,ABS , PVC ,nylon ,polycarbonate , plexiiglas , polyester resin , poyuret-hane , cement , ...

Working temperature: 5 °C - 35 °C

Epoxy adhesive NOWAX is used for the chemical welding, filling, hermetic sealing and agglutination of most metals (aluminium, brass, copper, iron, tin, stainless steel, steel et al), concrete, wood, ceramics, hard plastic ...

... aluminium, steel, brass and ferrite with and among each other. After mixing, the two-component adhesive produces a high strength and impact resistant adhesive film. The best mixing ratio is 1:1 (volume), ...

... COMPONENT ADHESIVE tiechem ® G500 is Methyl Methacrylate (MMA) based high performance structural adhesive. Application areas: Adhesive effect is superior on many materials which are ...

Working temperature: -55 °C - 120 °C

Alias #: 9-1196924-2 Specification : RK6626, RT-1050/3 Packaging Method : Roll

ZIRCAR Ceramics’ Organic Adhesive Type OA-1 is a soft, water-based polyvinyl acetate adhesive that is used primarily to bond ceramic fiber paper to castertips and in the fabrication of end dams used in ...