Flow: 10 l/min - 140 l/min
CP8 big flow combination pump is a kind of vane type pump. It has so many advantages: big flow and high vacuum, the bearing adopt the roll bearing, long time using. Also it adopts advanced oil-gas ...
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil tank capacity ...
Flow: 3.8 l/min
Pressure: 60,000 psi
Power: 30 kW
60,000psi operating pressure A low-cost, high-efficiency new choice Motor Rating：30kW/40HP Pressure Range (Deadhead) ：60,000psi Flow Rate at Max. Pressure：3.8L/min Attenuator Volume：1L Length：63in Width：47.24in Height：43.31in
Flow: 0 m³/h - 20 m³/h
Head: max 15.0 m
Input diameter: max 80.0 mm
Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for ...
Caffini Cipriano s.r.l.
Flow: 0 m³/h - 20 m³/h
Head: 0 m - 15 m
Input diameter: 80 mm
Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for ...
Caffini Cipriano s.r.l.
Flow: 0 m³/h - 30 m³/h
Head: max 15.0 m
Input diameter: max 100.0 mm
Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for solid ...
Caffini Cipriano s.r.l.
Pressure: 700 bar
• Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed ...
Momento AB
Flow: 50 l/min
Pressure: 8 bar
Pneumatic membrane pump, PP body Descriptive Specifications and advantages Specially designed to transfer aggressive and/or viscous chemical liquids. Plastic pumps have to be used for ...
Flow: 100 l/min
Pressure: 7 bar
Fluid temperature: 95 °C
Pneumatic membrane pump, Aluminium body Construction materials Body: Aluminium Membranes: PTFE Specifications and advantages: Compliant with the ATEX directive ...
Flow: 0 l/min - 0.288 l/min
Pressure: 0 bar - 40 bar
Power: 44 W
Fluid-dependent customizable dosing pump The micro annular gear pump mzr-7245 of the modular pump series is suitable for dosing and metering in low to medium pressure ...
Flow: 40, 440, 320, 190 l/min
Pressure: 1 bar - 7 bar
Length: 215 mm
... with a robust structure, is available in the aluminum or stainless steel version to reach a long-lasting performance. Advantages Atex certified Ex II 2 G c IIB T4 Low starting pressure Small ...
Flow: 120, 230, 300 l/min
Pressure: 1 bar - 7 bar
Length: 190, 200 mm
... with a robust structure, is available in the aluminum or stainless steel version to reach a long-lasting performance. Advantages Atex certified Ex II 2 G c IIB T4 Low starting pressure Small ...
Flow: 60, 125, 330, 570 m³/h
Pressure: 8 bar
Head: 0 m - 80 m
... required in a pump was to overcome the resistance in the pump. Another major issue was the mid-port scenario when Air pumps were turned down to much lower air pressure in an attempt to ...
Tapflo
Aluminium pump include all wetted parts coated with non stick PTFE, is equipped with stainless steel in/outlet ports. The model was developed for the printing industry where a low price ...
Tapflo
Flow: 0 l/min - 78 l/min
Pressure: 8 bar
Head: 0 m - 80 m
... Temperature max: - +110 C Pressure: - 8 bar Description: - It is a mid sized pump available in aluminium cast iron and stainless steel AISI 316L. With the compact ...
Tapflo
Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...
Flow: 0.0012 l/min - 0.0078 l/min
Pressure: 210 bar
Length: 107 mm - 132 mm
the compact low-noise external gear pump, EGA is right for the working conditions that need small flow and medium-high pressure. With aluminum extrusion body and special ...
Flow: 0.006 m³/h - 0.019 m³/h
Pressure: 210 bar
Length: 133 mm
low-noise external gear pump, EGB mostly applied to various cutting machines, lifting equipment, and metal processing machines. Its body is made of aluminum alloy by ...
Flow: 0.0019 l/min - 0.0032 l/min
Pressure: 250, 230 bar
Length: 184, 188, 193, 202 mm
... of aluminum alloy by gravity casting, which is lighter, high-strengthened, high-dense, and high-pressure resistant. Adopting a standard connection interface, SAE 2-hole flange, which is easy to install ...
Flow: 650 l/h - 8,000 l/h
Power: 8 W - 200 W
Length: 115 mm - 202 mm
... water pumps comes with multiple benefits for both the aquatic and hydroponic market. Suitable for both submersible or external use the HX88 series has an integrated thermal protector and uses it robust aluminium ...
Flow: 900 m³/h
Pressure: 100 bar
Head: 800 m
ANDRITZ innovative submersible pumps are the response to extremely stringent demands for operational reliability, service life, and efficiency. Thousands of submersible pumps have been installed around ...
Flow: 7.2 m³/h
Power: 550 W
Fluid temperature: 80, 110 °C
Vertical pumps are ideal for transferring corrosive fluids. With no wearing parts such as mechanical stops or seals, they are guaranteed leak-free. SIEBEC offers plastic (PP or PVDF) and stainless steel ...
Siebec
Flow: 480 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Diaphragm pump in aluminum series AAB-112 with membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE TRUCK AND INDUSTRIAL ...
RAASM SpA
Pressure: 0 psi - 2,321 psi
Fluid temperature: 5 °C - 40 °C
The GPO Lubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors or injectors. Standard features include: liquid level indicator, ...
Flow: 9.5 us gal/h - 114.3 us gal/h
Pressure: 45 bar - 225 bar
The LK Series metering pump is the largest in the high performance line of pumps from Walchem. The LK is a motor-driven, mechanically actuated diaphragm metering pump with a maximum capacity ...
Flow: 0 us gal/min - 100 us gal/min
Pressure: 7 bar
Head: 70 m
... SANDPIPER 1½" S15 Non-Metallic AODD Pump provides unsurpassed fluid containment in the event a diaphragm is breached. This leak-free pump is designed to be driven by compressed air or nitrogen. Why ...
WARREN RUPP
Flow: 1,181 l/h
Pressure: 12 bar
... metering pump, also known as the MACROY® pump, is now NSF/ANSI 61 and 372 certified for municipal compliance and safety assurance. Capable of handling pressures up to 175 psi (12 bar) and flow rates ...
Flow: 0.7 us gal/h - 300 us gal/h
Pressure: 50 psi - 175 psi
... External speed control, stainless steel fasteners and NSF certifications make this powerhouse pump perfect for water treatment applications. Compared to solenoid pumps or lost motion ...
Flow: 0 m³/h - 61 m³/h
Head: 0 m - 33 m
Power: 0.25 kW - 1.5 kW
Submersible Drainage Pumps QDX L Model:QDX-L SHIMGE Pump has been committed to technical researches, manufacturing Submersible Drainage Pumps , as well as providing first-class Submersible ...
Shimge Pump Industry (Zhejiang) Co.,Ltd
Flow: 0 l/min - 17 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... containing suspended solids ■ Possibility of suspended installation ■ Manifolds can be supplied with stainless steel reinforcement rings for pumps in PP – PP+CF – PVDF ■ Suitable for continuous use
DEBEM SRL
Flow: 6 l/s - 150 l/s
Pressure: 1 bar - 4 bar
Power: 0 kW - 246 kW
... international advanced level. The vehicle-mounted fire pump mainly consists of a low pressure and high pressure (medium pressure) centrifugal pump, gear box, piston water pump, 6% ...
SHAANXI AEROSPACE POWER HI-TECH CO.,LTD
Flow: 15.9 l/min - 24 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 0.8 kW
... misting systems The 2-diaphragms pump IOTA 20 produces a flow of 19 l/min and operates at a maximum pressure of 20 bar. It is available with single cylindrical shaft. Semi-Hydraulic diaphragm pump ...
UDOR S.p.A.
Flow: 135 us gal/min - 1,250 us gal/min
Pressure: 0 psi - 1,044 psi
Power: 0.37 kW - 1.1 kW
Mag Drive series are the first progressing cavity wobble stator pumps to offer magnetic drives. The proprietary, magnetic coupling design performs well in hazardous applications and is effective with difficult-to-seal ...
Please specify:
Help us improve:
remaining