... factors such as the flow conductance and leak-tightness of valves are of great importance. The valves of Leybold are optimized with regard to these demands. For every flange system there are a lot of ...
Leybold
DN: 8, 15, 20, 25, 10 mm
Pressure: 500, 315 bar
Temperature: -20 °C - 100 °C
3 WAYS HIGH PRESSURE BALL VALVE - BSP THREADED - L OR T REDUCED BORE - STAINLESS STEEL 316
DN: 8 mm - 100 mm
Pressure: 6 bar - 8 bar
Temperature: -20 °C - 80 °C
3 PIECES F/F BALL VALVE (58183) WITH ALUMINIUM PNEUMATIC ACTUATOR (50800)
... lockup valve is open and allows the free flow of compressed air from the positioner to the pneumatic actuator. When the lockup valve loses its signal (or it drops below an adjustable set point), the lockup ...
DN: 0.125 in
Pressure: 0 bar - 12 bar
Temperature: -20 °C - 60 °C
The cartridge Top-valve was especially developed for gas extraction from cartridges / bottles. The cartridge top valve can be combined with the cartridge pressure regulator ED 06 or with the flow meter ...
DN: 15 mm - 1,000 mm
Pressure: 16 bar - 420 bar
... flow control. - These electric design 1/4-turn control ball valves are more compact, lighter weight and much less expensive than comparably sized globe valves and segmented control valves ...
DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C
... . 10/520 19/03/1955 and subsequent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. Application: petrochemical. food. pharmaceutical & more. Valve ...
Ridart srl
DN: 3, 4 mm
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 60 °C
... 520 19/03/1955 and subséquent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. - Application: petroc hernie al. food. pharmac eutic al & more. - Valve ...
Ridart srl
DN: 4, 3, 2 mm
Pressure: 230 mbar - 8,000 mbar
Flow rate: 400 l/min - 3,750 l/min
It’s a Protection System with ribbon coil: déflagration in-line flame arrester in according with Directive 2014/34/EU and harmonized standard EN ISO 16852:2016. - Used for hydrocarbons or chemical pipeline. - Stage II vapor recovery ...
Ridart srl
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
The most standard Speed Control Valve for driving devices. The tube lead-out directions are free. The resin body rotates and the tube lead-out direction can be changed. For Free type, the fitting part rotate. For ...
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
This Exhaust Needle Valve controls the exhaust flow rate. The valve can be attached directly to a solenoid valve. Best suitable in case a cylinder, etc has no sufficient space around ...
DN: 12, 10, 4, 8, 6 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
Flame-retardant resin (Equivalent to UL V-0) is applied for the body material to adapt to spatter environment. Protective Cover at both needle and joint parts to protect from sparks. For price options, please contact our distributor ...
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
Pressure: 25 psi - 250 psi
Temperature: 71 °C
DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
... They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE FEATURES Fluid :Filtered air Operating pressure: 1 ÷ 10 bar Temperature range: -10°C ÷ +70°C Materials: ...
DN: 0.125, 0.5, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C
Axial slider valves allow to stop air flow inside a pneumatic system, simply by sliding the lever along the axis. Axial slider valves have zinc plated brass body while the slider is made of anodized ...
DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C
... and non-return valves with various tube connection options – Brass, aluminium and plastic throttle valves – For various applications Operating temerature -10°C to +70°C 0°C to ...
ITV
DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... and non-return valves with various tube connection options – Brass, aluminium and plastic throttle valves – For various applications Operating temerature -10°C to +70°C 0°C to ...
ITV
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... and non-return valves with various tube connection options – Brass, aluminium and plastic throttle valves – For various applications Operating temerature -10°C to +70°C 0°C to ...
ITV
DN: 80 mm - 100 mm
Pinch valves suitable for intercepting a wide range of products. - Size 80 - 100 mm - Valve composed of two identical half-bodies, both for the external part in aluminum and for the ...
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...
UFLOW AUTOMATION
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...
UFLOW AUTOMATION
DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...
UFLOW AUTOMATION
DN: 25 mm - 1,600 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 200 °C
... applications Disc materials: Rilsan®, Polyurethan, Halar®, PEKK, UltraleneTM, Nickel plated, Nickel aluminium bronze, Stainless steel, Stainless steel (Ra < 0.8), Super austenitic steel and Hastelloy Liners ...
InterApp AG
Type Filter Pressure Reducers Certifications Atex, EAC, PED Body material Aluminium, Stainless Steel AISI 316 series Port connection 1/4" ÷ 1 1/2" Applications Water treatment, Oil & Gas, Paint systems, Plastic/rubber industry
ODE
DN: 20 mm - 200 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 450 °C
VF VFT VFH Butterfly valves for air and gas VF, VFT and VFH butterfly valves are designed for regulation and control of air and gas flow. Valves can be operated manually using ...
DN: 177.8, 76.2 mm
Pressure: 0 bar - 30 bar
Temperature: -20 °C - 80 °C
... EMERGENCY VALVE VEM CARTRIDGE VALVE FOR EMERGENCY MANUAL ACTING The manual emergency valve VEM is a 2 ways / 2 positions valve, normally closed, direct acting. The ...
Oleoweb Srl
DN: 10 mm - 600 mm
... CERAMIC INDUSTRY, as a shut-off valve for solids, sludge, etc. ENVIRONMENTAL TECHNOLOGY, for sealing waste water, dust, sludge, etc. WATER TREATMENT/SEWAGE TREATMENT PLANTS, as a shut-off valve ...
AKO ARMATUREN
DN: 25 mm - 150 mm
Pressure: 6 bar
... air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A. Air Pinch Valve, VMC Series, Stainless steel design, ANSI B 16.5-150lbs Air operated ...
AKO ARMATUREN
DN: 40 mm - 300 mm
Pressure: 4, 3, 6 bar
... operated pinch valves: A powder-coated aluminium flange An aluminium flange with steel bushing that comes into contact with the product, powder-coated for more abrasive applications ...
AKO ARMATUREN
DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C
2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
DN: 10, 25, 15, 20 mm
Temperature: -20 °C - 150 °C
... way ball valve brass design nickel-plated with butterfly handle with male thread Producer Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material of spindle seal: PTFE Material of switching ...
DN: 50, 63 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C
... indicator • Dampened closing anti-water hammer design (fluid under seat) • Stainless Steel actuator housing for exceptional durability in steam and aggressive applications • Valves meeting Pressure ...
Parker Fluid and climate Controls Europe
DN: 40 mm - 400 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 95 °C
... butterfly valve's nodular cast iron body and butterfly have a polyester coating with a stainless steel stem. The lever of the unit is coated with aluminum and it comes with an EDPM liner. ...
Mival
DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F
Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and either 24 VDC or ...
DN: 25 mm - 150 mm
Pressure: 16 bar - 100 bar
Temperature: -273 °C - 65 °C
... globe or angle valve and actuator • - Insulating section with integrated bellows seal to protect the stem guide from freezing up (any desired mounting position) • - Prepared for installation in cold-box systems • ...
Temperature: 5 °C - 150 °C
... costs and waste materials. The valve body is hard anodized A6063 aluminum, with 304 stainless steel valves and bellows. Numerous seal materials are available for a ...
Please specify:
Help us improve:
remaining