Voltage: 3.3 V
The PAD2 is a portable and universally usable forcemeasurement amplifier with a digital display. The samplingfrequency can be adjusted in the range of 10 Hz (slow),20 Hz (medium) and 100 Hz (fast). The calculation ofaverages ...
HAEHNE
The F6300 High-Power Current Amplifier works in combination with the F6150 Power System Simulator to bring your realistic protection scheme testing power to the next level. This combination allows you to evaluate the ...
Support USB/SD/MMC?MP3/WMA format 2 channel amplifier with remote control and FM Arabic voice(optional) 2*2005IC or 1*7377IC
The inverter module with screw connection inverts the signals of ground switching NPN transistor outputs into positive switching PNP outputs, as well as signals from PNP into NPN switching signals.
Plastic fiber optic sensing in the rugged die-cast QM42 sensor housing. - Epoxy-encapsulated circuitry - IP67 Water Resistance - Self Contained
Voltage: 30 V
Frequency: 1 MHz
The 3030 is a DC to 1MHz amplifier with a maximum output of 30 volts peak to peak from a 50 Ω source impedance. A 600 Ω output is also provided. The unit can output up to 15 volts peak to peak into a 50 Ω load and can ...
Voltage: 30 V
Current: 300 mA
Frequency: 1 MHz
The 3030-220V is a DC to 1MHz amplifier with a maximum output of 30 volts peak to peak from a 50 Ω source impedance. A 600 Ω output is also provided. The unit can output up to 15 volts peak to peak into a 50 Ω load and ...
Voltage: 12 V - 30 V
Frequency: 100 Hz
Dimension 10.5 x 45 x 75.5 mm Connection Cable, 2.00 m, PUR Switching output PNP/NPN NO/NC programmable Housing material PBT Ambient temperature -10...70 °C Approval/Conformity CE UKCA cULus WEEE IP rating per IEC 60529 IP40
Voltage: 15 V - 30 V
Frequency: 100 Hz
Dimension 10.5 x 45 x 75.5 mm Connection Cable, 2.00 m, PUR Switching output PNP/NPN NO/NC programmable Analog output Analog, voltage/Analog, current 0…10 V/4…20 mA Housing material PBT Ambient temperature -10...70 °C Approval/Conformity CE UKCA cULus WEEE IP ...
Voltage: 10 V - 30 V
Dimension 15 x 36 x 61 mm Interface PNP normally open/normally closed (NO/NC) Display Output function- LED yellow LED green: Power Error - LED green, flashing Signal strength - segment display Setting Sensitivity (Sn) Light-on/dark-on Teach ...
Voltage: 110 V - 240 V
Current: 4 A
Power: 11 W
• - One- or two-channel design • - Relay or transistor outputs • - Small design requiring only very little space for control panel mounting • - Quick and easy mounting
Voltage: 10 V - 30 V
Current: 100 mA
Frequency: 3,000 Hz
High switching frequency for fast processes LED display to check operation, switching status and function Variable mounting options: DIN rail or free-standing mounting Easy parameter setting via teach button Operation ...
Voltage: 12 V - 36 V
Current: 200 mA
Frequency: 1,500, 800, 1,000, 2,700 Hz
Easy, quick and secure mounting Display with graphic capability for easy set-up Precise detection of small parts Available as 2, 4, 6 or 8-channel versions Operation with inexpensive acrylic fibre optics
Voltage: 0.5 mV - 10 mV
Current: 4 mA - 20 mA
Frequency: 1,000 Hz
FUTEK's IAA200 Analog Amplifier with Current Output is FUTEK’s brand new general purpose amplifier solution for in-line amplification of any full bridge strain gauge type sensor with mV/V range output. ...
FUTEK Advanced Sensor Technology, Inc.
Voltage: 200 V - 2,000 V
Frequency: 1 kHz
• Separate high voltage amplifier enables capacitance and dissipation factor measurements at 2 kV test voltage • True and proven DFR/FDS technology for highest performance • Large frequency range, DC to ...
Voltage: 9 V - 32 V
Current: 0 A - 1.8 A
Frequency: 55 Hz
... current, dither and ramps. The EV22K5 has two independent proportional amplifiers for mutual control of two twin solenoids or two sets of two single-action solenoids. The amplifier module is mounted ...
Voltage: 220 V - 750 V
Current: 1 A - 11 A
Frequency: 40 Hz - 100,000 Hz
The 5725A Amplifier enhances the 5700A Series Multifunction Calibrators in the ac voltage, ac current, and dc current functions. The 5725A operates under complete control of the 5700A Series calibrators through an interface ...
Voltage: 10 V - 30 V
Current: 2 A
Power: 1 W
... Country of origin - DE Weight - 170 g Technical Data Signal type - Digital input Device type - Isolating switching amplifier Ex version - yes Approvals - ATEX Functional safety (SIL/PL) - SIL2 Nominal ...
TURCK
Voltage: 24 V
Current: 0.1 A
Power: 1 W
... Country of origin - DE Weight - 162 g Technical Data Signal type - Digital input Device type - Isolating switching amplifier Ex version - yes Approvals - ATEX Functional safety (SIL/PL) - SIL2 Nominal ...
TURCK
Voltage: 24 V
Power: 3 W
... origin - DE Weight - 172 g Technical Data Signal type - Temperature input Device type - Temperature measuring amplifier Ex version - yes Approvals - ATEX, IECEx, INMETRO, TR CU, NEPSI Functional safety ...
TURCK
Voltage: -19.6 V - 26 V
Current: 14.68 A
... charge amplifier, and monitoring device. The dynamic pressure sensor should be a high temperature piezoelectric type that converts dynamic pressure to an output signal scaled in pico-coulombs per unit of pressure. ...
Voltage: 0 V - 10 V
Current: 4 mA - 20 mA
The high-precision industrial DC-amplifier of the model series TesT 854 provides load-proportional signals. On the basis of a power supply of 24V or 230V an initially stable voltage will be generated, in order to feed ...
Voltage: 0 V - 250 V
Current: 5 A
Power: 8, 6 W
Small signal amplifier that enables 2 programmable alarms to the values desired in each case. Each alarm level has an output for a voltage-free contact normally open (when unit is powered ) that withstands maximum 250V ...
Power: 20, 10, 15, 25 W
Frequency: 250 Hz - 3,000 Hz
Features 1. Can be connected with Joiwo Explosion proof Telephone used in hazardous industrial environment. 2.Aluminium alloy shell, high mechanical strength, impact resistant. 3.Shell surface temperature electrostatic spray, ...
Voltage: 7 V - 100 V
Power: 500 W
Frequency: 1 kHz
... tanks, offshore oil platforms, oil tankers and other places (safe area). 2.Provide broadcasting system area power amplifier, suitable for large, medium and small regional broadcasting PA Product Features 1. 3U ...
Voltage: 0 V - 10 V
Current: 0 mA - 20 mA
• Isolating amplifier for implementation on standard signals • Galvanic isolation between input, output and power supply • About 18 Vdc unregulated supply voltage, max. 25 mA • Supply voltage 230 Vac/115 Vac • Plastic ...
eZT Sensor Interchangeable Amplifier Features eZT enables you to perform force measurement flexibly, well financially, and effectively in risk management. Handles a wide range of force testing applications ...
Voltage: 24 V
Current: 500 mA
Frequency: 2,000 Hz
Desktop Force Amplifier FA Plus2/eFA Plus2 FA Plus2/eFA Plus2 is desktop force amplifier used in various measurement by connecting desired sensor. It delivers accurate force value due to the high ...
Voltage: 20 V - 253 V
Current: 1 mA
Power: 1 W
amplifier filling level, Conductive, 23x114x99mm, 2 Channels,Clamp, IP20, Polyamide, With LED display Description Filling level sensors - Switching amplifiers Filling level and level sensors operate ...
Voltage: 15 V - 18 V
Current: 800 mA
The MOBALine-Booster is a device for the amplification of MOBALine signals. Extensions of more than 1000 meters and with approximately 70 additional clocks are achievable. Existing installations can easily be extended without the need ...
The Impulse Booster is a device for the amplification of impulse signals or line voltage transforming. Clock line extensions of more than 1000 meters and with approximately 100 additional clocks are achievable. Existing installation can ...
Binary explosion proof switching amplifier type ExBin-A for connection of 1, 2 or 5 passive potential-free sensors for use in HVAC systems. - Sockets for 1, 2 or 5 passive potential-free binary sensors (depending on ...
Voltage: 5 V - 10 V
Current: 0 mA - 20 mA
Frequency: 1 Hz - 5,000 Hz
The XTSGA Load Cell Amplifier is a versatile signal conditioning unit for silo weighing, process control and PLC interface applications. It has been designed to be make calibration and configuration very simple, resulting ...
Voltage: 0 V - 10 V
Current: 4 mA - 20 mA
... XT960 load cell amplifier is available in surface mount form, with an ABS, Stainless Steel or Die Cast case (all rated to IP65). Operating from AC or DC power and providing 4-20mA and 0-10V analogue outputs as standard, ...
Power: 5,000 W
... slave unit for up to 15 kA current injection The slave Raptor is visually identical to the master unit but lacks the amplifier, the handheld controller and the auxiliary input/output panels. Its mission is to push ...
Power amplifiers, Voltage and Current Channels of the Mentor 12 The MENTOR 12 is a modular system that offers many possible configurations from typical 3V3I to the maximum of 6V6I (two complete 3 phase systems on the ...
Voltage: 1 mV - 10,000 mV
Current: 0 mA - 10 mA
Frequency: 0 Hz - 1,000,000 Hz
CIQTEK LIA001M is a high-performance lock-in amplifier that combines various functions such as lock-in amplification, virtual oscilloscope analysis, parameter scanning, demodulation plotting, and data analysis. Based ...
Please specify:
Help us improve:
remaining