Analog I/O modules

Our Value Design Products Increase the Value of Your Control Panels. I/O Relay Terminals with 16 Points and Push-In Plus terminal blocks to Downsize Control Panels and Save Labor. • I/O Relay Terminals with 16 points to mount G2RV ...

The MDS NETio is an integrated, scalable family of wireless solutions that provide long distance unlicensed communications, allowing users to interface both analog and digital I/O including sensors for pressure and flow as well as controls ...

This product is a USB2.0-compliant analog I/O unit that extends the analog I/O function of USB port of PCs. This product features high-precision 16bit analog inputs (32channels), high-precision 16bit analog outputs (2channels),digital ...

Application range (zones): 1, 2 Ex interface zone: 0, 1, 2, 20, 21, 22 Max. voltage Uo: 24.40 V AT_ST00589: no Highlights - Eight channels can be used individually as inputs or outputs Intrinsically safe Ex ia IIC inputs/outputs ...

High-speed counting, along with position detection using an array of different displacement transducer technologies, both absolute and incremental, is an essential element of many automation applications. With the EtherCAT Box modules ...

Input Module IO 113 designed to interface with pump sensors. One without communication as standard variant and one with communication for interface to Sensor Module SM 113

6 digital inputs (+24 V DC/3.5 mA) Input delay: 1 µs 8 digital short circuit proof outputs (+24 V DC/0.5 A/backreadable) 1 analog input (±10 V DC/16 bits) 1 analog current input (0-20 mA resp. 4-20 mA/16 bits) For the S-DIAS system, ...

Hitachi´s newest Remote I/O series provides the best support on future oriented and enhanced application.The strength of this series is the flexibility by gathering machine information within decentralized applications with the combination ...

The ESX.iom is a CAN I/O module for 12V and 24V systems, used for expanding the inputs/outputs of a master control unit via CAN. Communication with the master control unit is through CANopen, CANopen Safety, STW protocol ECeS or J1939. ...

LonWorks Network The LON (Local Operating Network) technology is a network control system developed by Echelon, USA. The LON technology is an intelligent, distributed network for communication with various sensors and actuators at a ...

Up to PLd in accordance with EN ISO 13849-1 and SIL2 in accordance with IEC 61508 Screwless terminals for easy installation Status diagnostics via control outputs and LEDs Number of sensors can be increased to 4 per ...

Analogue signals are transmitted to the controller or supplied to the peripherals with the highest accuracy and interference immunity. A microcontroller converts the measured values of the analog inputs and outputs with the calibration ...

The Syslogic USB mini card is a software-configurable expansion card with four analogue inputs. The analogue I/O module can be configured for four voltage ranges: 0 to 5V, –5 to +5V, 0–10V and –10 to +10V. The analogue I/O module has ...

Besides three different digital I/O expansion modules, an analog I/O expansion module is also available. By using RevPi AIO, a Revolution Pi system is expanded by 4 analog inputs, 2 analog outputs and 2 RTD channels. Like all I/O modules ...

Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement B+ or B- Digital inputs Low ...

Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal ...

Get multivariable outputs and a powerful configuration and maintenance interface in a convenient, easy-to-install package. This smart module provides fast access to flow, density, temperature and many other parameters. Features ...

The ANTARES 8AIH Remote I/O Module is suitable for the direct linking of 8 intrinsically safe two-conductor transmitters. NAMUR sensors, optocouplers, wired and unwired mechanical contacts or other actuating elements can be connected ...

-Designed specifically for Remote I/O Systems -System sizes from 2 to 15 I/O modules per CPU -Easy configuration using free software utility. -Automatic I/O module identification and scanning -No programming required but can be used ...

CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density.

The Curtis Model 1352 eXM CANbus Hydraulic Input/Output Expansion Module can be added to any CANbus based control system utilizing the CANopen communication bus protocol. It provides a simple, flexible and cost effective method of controlling ...

FSoE-Slave module with Analog Option for safe speed and position of up to 2 axes for further evaluation in an FSoE master module. 14 Safe digital inputs 4 Safe pp-switching semiconductor outputs - switchable to 2 safe pn ...

Key Workflow: Replaces the cards breakout cables for easy connectivity of audio I/Os. BOB8 is an elegant, safe, and ergonomic solution to connect audio input and output signals to Digigram’s multichannel sound cards via a sturdy 2U ...

M12 interface、IO-Link Hub、8AI，PT100 thermocouple analog module • IO-Link protocol device • 8 ports and 8 thermocouple analog quantity interfaces • Protection level: IP 67 (when correctly connected) • Shell material: Nickel plated ...

Supports 4*200KHZ high-speed pulse output. Supports T, S curve acceleration and deceleration. Supports two-speed positioning and interrupt one-speed positioning. Supports variable speed operation. Supports single-speed positioning. Supports ...