ArcoFILL is the ultrasonic filling sensor that remotely monitors the filling level of waste collection containers. The sensors are also set to transmit: temperature possible ...
Process pressure: 0.8 bar - 1.1 bar
Process temperature: -20 °C - 70 °C
Capacitive sensor without moving parts based on the principle whereby the electrical capacitance of a capacitor is detected. The instrument is supplied with a standard setting enabling it to perceive material at a distance ...
Level range: 1,000 mm
Process temperature: 14 °C - 158 °C
Conductive level sensor designed to independently monitor two level switch thresholds for liquids. Also enables a signalling delay to be set. Current flow between two electrodes immersed ...
Level range: 0 m - 150 m
Process temperature: 0 °C - 70 °C
Hydrostatic level sensor measures the level with the help of liquid pressure, It transfers information to the control equipment by converting the pressure value formed at the liquid ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Level range: 4 m
Process temperature: -20 °C - 80 °C
+- 30% / 2W Max. 300mA M68*20 Connection 0.25-0.5 Sensitivity 0.02% Resolution, Max. 4 Meter Measurement Adjustable Blind Spot <100mm 15° +/- 2° Measuring Angle Free PC Software
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Level range: 10 m - 30 m
Process pressure: -1 bar - 3 bar
Process temperature: -40 °C - 130 °C
Margin of Error: ±5 mm Process Connection: Threaded G1½ A or OPS. 1½ NPT, Flanged from DN 50 Operating voltage: 14… 36 V DC
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Level range: 12 mm
Process temperature: -40 °C - 100 °C
The optical liquid level switch consists of an infrared LED and a receiver. In air, the light beam from the infrared LED is reflected back into the receiver. When rising liquid touches the tip of the sensor, ...
Process temperature: -40 °C - 100 °C
Optical liquid level switches use the light reflection principle in the prism to detect whether there is liquid at the installation position of the sensor. These optical level sensors ...
Process pressure: 20 psi
... WLM-Sensor maintains the liquid in a container to a specified level without the use of electricity. Only a pressurized supply source is needed. Water is the typical application, but other liquids ...
Range 10-180 Ω Flange Ø 70 mm Flange holes 5 holes Bolt circleØ 54 mm Float Ø Ø 42 mm Float material NBR Holes Ø 5,25 mm Max voltage 28 VDC Customization Other lengths on request calibration
Range 300-10 Ω Flange Ø 70 mm Flange holes 5 holes Bolt circle Ø 54 mm Float Ø Ø 42 mm Float material NBR Holes Ø 5,25 mm Max voltage 28 VDC Customization Other lengths on request calibration
Level range: 0 m - 100 m
Level range: 1 m
Process pressure: 1 mbar - 5 mbar
Process temperature: 120 °C
... a fluid level Ready-to-use solution Self-powered Emission on event (Alert) Double level of detection Compatible with KARE© services EXAMPLE OF USE CASE Fluid level Detect the ...
Process temperature: -20 °C - 70 °C
Capacitive level controls are widely used where it is necessary to control the level of substances both solid and liquid which may not be conductive. They are particularly used in silos for cereals, foodstuffs ...
Process temperature: -20 °C - 60 °C
They work on the resistivity of liquids and sense the level via the electrodes placed in the conductive liquids. The presence of liquid between the electrode (or electrodes) and the metal surface of ...
Process temperature: -200 °C - 250 °C
... used to control the levels of hot materials such as liquids, oil, powder and plastic granules. They also sense solid metallic and non-metallic bodies positioned in areas of high temperature. The connecting ...
Level range: 4 m
Process pressure: 25 bar
Process temperature: 80 °C
- Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C universal filters with GL connection and flow chamber LS - Connection: ø 12 mm - With 4 m electrical connecting cable - ...
Level range: 4 m
Process pressure: 0 bar - 25 bar
Process temperature: 80 °C
- Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C stainless steel universal filters with condensate drain and flow chamber LS25 - Connection: 1/4" male NPT thread - ...
Level range: 1.5 m
Process pressure: 11 bar
Process temperature: -20 °C - 50 °C
... non-conductive media. The new liquid alarm sensor type KS3 replaces the KS2. The KS3 is an adequate replacement for the KS2.Ex model. The former KS2 plastic enclosure has been replaced by a rugged aluminium case. Liquid ...
Level range: 6 m
... casing head IP 67 • The UFM is an ultrasonic sensor for continuous level measurement without contact with the fluid. Advantage • Principle of measurement without contact • Options for distance, ...
Level range: 50 mm - 3,000 mm
Process pressure: 10 bar
Process temperature: -40 °C - 125 °C
The magnetic level sensors of the SRF-381 series are based on the action of one or more reed switches located inside the tube where the magnetic float moves. The magnetic field activates the relays ...
Level range: 100 mm - 3,000 mm
Process pressure: 350, 700 bar
Process temperature: -40 °C - 110 °C
The level transducers of the PCS III series are rugged, accurate, without mechanical wear between the measuring probe and the float, they are resistant to shock and vibrations and are equipped with protection against ...
Level range: 0 m - 200 m
Process temperature: 0 °C - 80 °C
... LV35 submersible Liquid level transmitter is designed for use in applications where the pressure is created by corrosive pressure media. The pressure diaphragm is made from tantalum and the housing is made from PVDF. ...
Process temperature: -40 °C - 85 °C
Level probe for all pressure measuring ranges within the limits between 0,1m water column (WC) and 250 mWC for level measurements in tanks, systems as well as in water bodies and weirs.
ADZ NAGANO GmbH
Level range: 279 mm - 5,000 mm
Process pressure: 100 bar
Process temperature: -60 °C - 100 °C
The AKS 4100 liquid level sensor takes you to a whole new level of flexibility and accuracy. With TDR guided radar technology, the sensor is fully adapted to industrial ...
Level range: 51 mm
Process pressure: 0 Pa - 689,475.73 Pa
Process temperature: -40 °F - 257 °F
CAP-300 Series Capacitive Level Sensor is compact, low-maintenance and highly-durable sensor that tolerates coating, can be mounted in any position and is compatible with coolants making ...
GEMS SENSORS & CONTROLS
Designed for harsh environments: The level sensors of the MPx series are robust and durable. These advanced piezoresistive pressure transmitters deliver a variety of measurements, such as surface water ...
Rittmeyer
Level range: 1 m - 35 m
Process pressure: 10,000 Pa - 3,500,000 Pa
Process temperature: -40 °C - 300 °C
Hygienic pressure transmitter, designed for food and pharmaceutical industry, is suitable for CIP/SIP cleaning and sterilization. Smart compact design, the wetted parts is made of high quality stainless steel 316L and integral welding, ...
Shanghai LEEG Instruments Co.,Ltd.
Level range: 0 m - 70 m
Process temperature: -40 °C - 100 °C
... / Two-wire Introduction SUP-RD909 Radar level meter adopts a recommended industry emission frequency of 26GHz. The measurement range of up to 70 meters, covering a large reservoir water level measurement.
Supmea Automation
Multiphase level measurement system With the highest level of accuracy and stability The challenges in the measurement of several phases, so-called multiphase levels, include not ...
Berthold Technologies Process Control
Process pressure: 250, 150 psi
Process temperature: 0 °C - 90 °C
... these sensors the ideal choice for most applications. Ultrasonic Liquid Level Sensors - Plastic Ultrasonic Liquid Level Sensors Our plastic ultrasonic ...
Process pressure: 2 MPa
Process temperature: 150 °C
A conductive SET/J1 sensor, max. temperature 150 C and max. pressure 2 MPa.
Labkotec Oy
Level range: 3.66 m
The ToughSonic CHEM 12 is the newest in the line of tough and intelligent Senix CHEM Level and Distance Sensors. Ideal for applications where rapid changes in temp occur Tested under more stringent ...
Senix Corporation
Level range: 0 m - 200 m
Process temperature: -40 °C - 85 °C
For sea water, dirty water, oil, solvents. CS-PT400-WH are level sensors with special structures for specific applications. The characteristics of the products are: high precision, small size, stability, ...
the best suppliers
Please specify:
Help us improve:
remaining