Axial fans

Air flow: 44,200 m³/h
Diameter: 1,400 mm

... power 19W • Amperage 0,08A • Frequency 50/60Hz • Dimensions (LxWxH) 12 x 12 x 3,9 cm • Standards CE certified • with fan grille and 4x screws

Diameter: 711 mm - 813 mm
Rotational speed: 250 rpm - 4,250 rpm

Visctronic Fan Drives utilize BorgWarner’s proven viscous technology with precise electronic control. The fan drive is controlled by the engine’s control module for precise fan speed ...

Air flow: 4,400 m³/h - 15,000 m³/h

... to 30%. DS is realised with a robust, galvanised, powder-coated steel supporting structure, equipped with a high-capacity fan capable of guaranteeing more than efficient air recirculation, positioned behind a special ...

Air flow: 900, 4,500, 2,250, 2,900, 1,500 m³/h
Noise level: 55 dB - 72 dB

... applications where forced ventilation is required. Construction: Body and grille in steel with anti-corrosion epoxy coating. Fan in ABS.

Air flow: 468 m³/h - 2,390 m³/h

... extraction. Designed and produced in Italy; characterized by steel sheet housings and finned lower base; high-head centrifugal-fans generated flow; more than 40.000h reliability; terminal box connection; polyurethane ...

Air flow: 2,300 m³/h - 115,000 m³/h
Diameter: 310 mm - 1,600 mm
Rotational speed: 750, 1,500, 1,000 rpm

Smoke extraction in case of fire, 300/400°c for 120 minutes. • Smoke extraction • Pressurization • Industrial ventilation & explosion-proof application Multiple european laboratories, BSI KITEMARK, APPLUS. ADVANTAGES DUCT- ...

Air flow: 750 m³/h - 150,000 m³/h
Diameter: 165 mm - 1,700 mm
Rotational speed: 3,000, 1,500, 1,000 rpm

... range of ENAG fans has been designed especially for the marine environment. With more than 30 years’ experience in fan design and manufacture, efficiency and reliability are assured. Advantages Designed ...

Air flow: 900 m³/h - 4,500 m³/h
Rotational speed: 1,200 rpm - 1,460 rpm
Noise level: 55 dB - 72 dB

Explosion Proof Certified Axial fans to extract air and fumes directly outside through short ducting, wall or panel mounting.

Air flow: 285 m³/h
Rotational speed: 2,750 rpm
Noise level: 60 dB - 60 dB

Material Forward curved impeller made of galvanized steel Terminals A wire Bearing Ball bearings Insulation calss of motor: B External rotor motor with thermal protector Maximum operating temperature 70°C

Air flow: 3,000 m³/h

Air flow: 1,400 m³/h - 6,300 m³/h

UVO H EC is the group of roof fans with horizontal air outlet. They are designed for ventilation of public and industrial buildings. Their main function is to remove stale air from the room. Combined with LEO and KM ...

... Introduction GKseries high temperature high humidity axial ventilator fan is widely used in drying kiln, painting workshop, warehous, basement. etc.The axial fan is ...

Air flow: 122 m³/h - 162 m³/h

Size: 120mmx120mmx38mm Airflow: 122~162m3/hr 72-95CFM Weight: 480g Noise: 39~48dBA Impeller: PBT Thermoplastic Black,UL94-V0 Frame: Aluminum Alloy Terminals: 0.5mm Lead Wire: AWG#22 UL 1007(Optional) Motor: Shaded Pole Induction ...

Air flow: 100 m³/h - 700,000 m³/h

I.VA.CO. fans division consists of a team of qualified technicians with wide and relevant experience, who are able to design special industrial fans by using the most updated technologies. Heavy industrial ...

Jetstream is an impulse fan designed for the ventilation of car parks and underground service areas, so as both to reduce levels of polluted air and to assist with the extraction of smoke in the event of a fire. The ...

Single-piece, glass-reinforced polyamide fan with blade geometry derived from our long experience as a market leader in radiator and engine cooling for off-road applications. Ranges from 12 inches (305 mm) to 39 inches (1000 mm).

Air flow: 17.9, 22.6, 27, 31.6, 13.3 m³/h
Rotational speed: 6,000, 8,000, 10,000, 12,000, 14,000 rpm
Noise level: 48, 29, 36, 40 dB

Material : Impeller& Frame Plastic(UL94V-0) Lead Wires :UL 1007 AWG#26 or Equivalent Impeller : 7 Blades Rotational direction CCW view from impeller side Mass：24g

Air flow: 18,689 m³/h - 28,713 m³/h
Diameter: 508, 610 mm

... coatings Rugged aluminum housing and fan blade meet demanding ventilation requirements. RF design using action-reaction principles; compressed air is discharged through nozzles located at the tip of the fan ...

Air flow: max 980.0 ft³/min

● The Aerospace turbine fan design provides huge and high output airflow. ● Compact size, lightweight, double walled and easy hand carrying handles give to excellent portable function. ● Corrosion-proof, anti-impact ...

Air flow: 700 m³/h - 15,000 m³/h

Axial fan low pressure Installation: hazardous areas - Zone 1 / 2 (Gases) Classification: Group II - Category 2G

Diameter: 400 mm - 1,400 mm

... obtained by the centrifugal fans with the advantages of size and ease of installation given by the axials, the CNX and MXF series are based on Comet’s decades of experience in the design and production ...