Ball valves

DN: 0.5 in - 3 in

Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ...

Pressure: 2,000 psi - 20,000 psi
Temperature: -46 °C - 121 °C

• The valve switch transmission adopts the ball screw structure, effectively reduce the operating torque and achieve common valve 1/3. • Gate valve structure • Valve ...

DN: 8 mm - 80 mm
Pressure: 64 bar

Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.

DN: 10 mm - 100 mm
Pressure: 16, 10 bar

... emptying the system. • Handle built-in tool for easy adjustment of the threaded seal-carrier (and ball torque). • “Antiblock” system that avoids ball blockage. • 100% factory tested. • Minimal pressure ...

DN: 1 in - 2.5 in
Pressure: 70, 100 bar
Flow rate: 80, 1,600 l/min

Characteristics Type AA - Female Threads Type ED - Swivel Nut TypsizeQ max.P max. B31½”/2”800 l/min (211 US gpm)100 bar (1450 psi) B52½”1600 l/min (423 US gpm)70 bar (1015 psi) Connection possibility: - 1”, 1¼", 1½", 2" and 2½" - ...

DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C

... Anfrage Contact travel 0°; 90° Surface burnished Material Steel housing, ball and operating shaft POM ball seal NBR O-ring

DN: 0.5, 0.75, 1 in
Pressure: 250 psi
Temperature: 400 °F

The Motorized Ball Valve delivers a torque of 150 in-lbs using a non-reversing motor, opening the valve in 5 seconds and minimizing pressure hammer. The motor is protected in a NEMA 4X ...

DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C

Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...

DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C

Features •Increased safety •Superior corrosion resistance •Extended lifetime •Lower operating costs Specifications •Design - ISO/DIN •Nominal Pressure - 10 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face ...

DN: 0.125 in - 0.375 in
Pressure: 16 bar
Temperature: 60 °C

This vented 2-Way Ball Valve provides quick and easy manual isolating and venting of either pressure gauges or any other pressurized control loop components.

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 250 °C

... and wet materials are strictly prohibited from entering the valve. 4. It is strictly forbidden to Weld flanges after installing valves in order to avoid damaging valve sealing rings. ...

DN: 0.375 in

Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)

DN: 13 mm
Pressure: 350 bar

... block body ball valves designed for use as on/off devices for hydraulic applications with standard and extended SAE mating flange connectors according to ISO 6162-1, 6162-2 and SAE J 518 C. Ball ...

K-Tron Aeropass Valve aim at transferring the material straight on to a Hopper allowing to be used in non-authorized spaces. It consists of an instant switch off material on total filling of Scale Hopper. Aeropass Valve ...

DN: 6 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -20 °C - 120 °C

Body material Nickeled Brass Ball material Brass PN (End) PN25 End BSP Female/Female Contact sealing PTFE Operating system Lever

DN: 0.5 in - 2 in
Pressure: 25, 16 bar
Temperature: -5 °C - 90 °C

... a full bore and anti blow-out stem with fabrication according to NF079. Its solid and rilled ball is designed to prevent water stagnation between the ball and the body. It was technically made with ...

DN: 12 mm

This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have ...

DN: 25 mm - 150 mm

... discharge ball valve. To allow you to adapt to any situation, the Monopok shutoff offers multiple configurations. The main feature to choose is the waterway diameter: DN25, DN40, DN65 or DN80. You ...

DN: 8 mm - 100 mm
Temperature: -20 °C - 230 °C

YR240 Brass ball valves PN 40 with pneumatic actuator -Full bore ball valve -Anti blow out stem -Top-flange according to DIN-ISO 5211 -Direct mounting TECHNICAL ...

DN: 1 in - 4 in

Amarama Engineers Ball type Flush Bottom Tank Valves are used for discharging of material from reactor vessels and tanks. Our Ball type Flush Bottom Tank Valves are available ...

DN: 20 mm - 63 mm
Pressure: 10 bar

... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness.

DN: 0.5 in - 8 in
Pressure: 0.5 bar

Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar.

DN: 0.5, 0.75, 1, 1.25 in
Pressure: 1.6 MPa
Temperature: 1 °C - 130 °C

... open/close the motor of ball valve. Then the heat/cool water enters into fan coil unit to supply the heat or cool air. When the room temperature reaches the set-point, thermostat will send a signal ...

DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C

... manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ...