Bidirectional valves

DN: 6.35 mm - 19.05 mm
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 80 °C

DOUBLE OVERCENTER VALVE FOR OPEN CENTER VBCD DOUBLE COUNTERBALANCE VALVE NOT COMPENSATED FOR IN-LINE INSTALLATION With the Oleoweb VBCD counterbalance valves it is possible to support ...

DN: 0.75, 0.5 in
Pressure: 6,000 psi
Temperature: 200 °F

... performance and reliability 6,000 psi pressure rating @ 200 °F Replaceable Delrin® seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning PCTFE or PEEK soft seat ...

DN: 50 mm - 1,200 mm
Pressure: 10 bar
Temperature: -10 °C - 120 °C

... blind holes and throughbolts enables the wafer-type knife gate valve to be clamped between pipe flanges or used as dead-end valve at full operating pressure. Economically efficient The valve ...

DN: 0.5 in - 3.15 in
Pressure: 700 bar
Temperature: -40 °C - 150 °C

... There is an internal relief port design that ensures positive shut off of the valve in either flow direction, even during system evacuation. All Ball valves are bi-directional and may ...

DN: 0.25 in - 1.5 in
Pressure: 0 bar - 690 bar
Temperature: -40 °C - 74 °C

30 Series shut-off valves are high pressure, high flow applications up to 10000 psig / 690 bar and offer Cv = 0.28-20.0. The 30 Series offer globe and angle pattern bidirectional flow, soft seat and built-in ...

DN: 6.5 mm - 15 mm
Pressure: 1.5 bar - 10 bar
Temperature: -20 °C - 180 °C

Unidirectional blocking valves are safety devices which can block the cylinder rod when, accidentally, the pressure fails. Bidirectional blocking valves are used to block the cylinder ...

DN: 0.5 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

Certificates: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL

DN: 63.5 mm
Pressure: 45 bar - 250 bar
Temperature: -40 °C - 204 °C

... REDUCING / RELIEVING CARTRIDGE VALVE The SVPR98-G38X is a direct-acting, spool-type, fixed regulated pressure setting, pressure reducing relieving valve. It is a 3rd generation hydraforce drop-in, ...

DN: 0.25 in - 3 in
Pressure: 13.8, 8.6 bar
Temperature: 178 °C

The NIBCO® bronze gate valve features a screw-in bonnet for service where infrequent maintenance is required. The female threaded ends allow for ease of installation. Non-rising stem gate valves are ...

DN: 15 mm - 400 mm
Pressure: 55 bar
Temperature: -196 °C - 450 °C

... floating (seat supported) ball valves, incorporating mounting flanges to BS EN ISO 5211, featuring soft, metal and carbon seated designs There are two separate design types within the one piece Ultra-Seal range, depending ...

Temperature: -45 °C - 260 °C

KLINGER BALLOSTAR® KHI BALL VALVES Decades of reliability guaranteed KLINGER Ballostar® KHI ball valves will keep up with stricter requirements and are assured to already meet future standards with ...

DN: 0.5 in - 3 in

Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, ...

DN: 50 mm - 400 mm
Pressure: 4 bar - 10 bar
Temperature: -10 °C - 90 °C

Body material Cast iron Gate material Stainless steel 304 PN (End) PN10 End between flanges Contact sealing Nitril Operating system Double acting pneumatic actuator

DN: 50 mm - 400 mm
Pressure: 25 bar
Temperature: -29 °C - 210 °C

This wafer type device offers 100% tightness with ISO PN25 flanges. The double eccentric device is bidirectional with a preferential flow direction indicated by an arrow. It complies with fire safety according to ISO ...

DN: 300 mm
Pressure: 100 bar

2-directional valves are applied in gas engineering in case of a change in fluid flow direction in the installation. Basic design comprises passage cage valve DN300, PN100, Kv1350. The plug design ...

DN: 0.5 in - 1.25 in
Pressure: 2.1 MPa
Temperature: 2 °C - 94 °C

... proportional control, and 0~10Vdc (1mA) feedback signal. * The valve actuator and valve body is used tight lock connection. The actuator can be installed after the installation of valve ...

DN: 50 mm - 1,200 mm
Pressure: 10 bar

The EB model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such ...

Bidirectional Knife Gate Valve AFC knife gate valves, are designed for convenient, unrestrictive control over pipeline flow. Specifically made for industrial use, size range from DN50-DN1800 ...

DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: -29 °C - 180 °C

PFA LINED, FULL BORE, DIN BALL VALVE – KTN 123T The KTN 123T is our PFA lined DIN flanged full port ball valve. The range is from DN15 to DN150. Suitable for handling large quantities of highly corrosive ...

DN: 80 mm - 300 mm
Pressure: 6, 7, 8, 10 bar

Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised ...

DN: 2 in - 48 in
Pressure: 150, 250 psi
Temperature: -40 °F - 180 °F

DeZURIK’s KUL Urethane Lined Knife Gate Valves are designed for on-off and throttling applications of abrasive slurry and dry abrasive materials. Urethane Lined Knife Gate Valves are 100% port area and ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

DN: 0.5 in - 12 in
Pressure: 100 psi - 290 psi
Temperature: -29 °C - 316 °C

... Design and Testing Standards​ API 598 Valve Inspection and Testing PED Design and fabrication of pressure equipment API 599 Metal Plug Valves-Flanged, Threaded and Welding Ends ISO 10423 Valves ...

DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C

... inside the SAE mounting face the shut-off valve simply remains mounted to the closing end after releasing of the pipe or the flexible pipe connector. The inner calibre of the shut-off valve is increased ...